[MaadDaawg]

Okay, added 2 92mm fans onto the 5v rail of PSU2 - had to help them start turning but they kept going on their own after than

Just let it boot into Gamers OC which I had set last night and it booted up on the first attempt. Nothing earth shattering at ~4700mhz, but better than it would do yesterday. Shitty RAM timings too on this one... default gamer oc I guess? Set the cards up to 845 and ran a vantage test (this time with with the CPU handling the Physx)

Hard to get a good screeny cause in this mode effing Speettrap is still on so it bounces from 1200 up to 4700. Caught it the fastest I could but forgot to drop down the box to show the 4 GPUs.

Next test will be full extreme oc, and we'll see what happens. May still need to balance the load between the PSUs better

[punx223]

Originally Posted by MaadDaawg

Okay, added 2 92mm fans onto the 5v rail of PSU2 - had to help them start turning but they kept going on their own after than

Just let it boot into Gamers OC which I had set last night and it booted up on the first attempt. Nothing earth shattering at ~4700mhz, but better than it would do yesterday. Shitty RAM timings too on this one... default gamer oc I guess? Set the cards up to 845 and ran a vantage test (this time with with the CPU handling the Physx)

Hard to get a good screeny cause in this mode effing Speettrap is still on so it bounces from 1200 up to 4700. Caught it the fastest I could but forgot to drop down the box to show the 4 GPUs.

Next test will be full extreme oc, and we'll see what happens. May still need to balance the load between the PSUs better

for SS just open superpi and run/minimize take ss

[punx223]

why does GPUZ show 2 way sli?!?!

[MaadDaawg]

Originally Posted by punx223

why does GPUZ show 2 way sli?!?!

I noticed that too, but it does show all 4 in the drop down. All 4 lanes are on and all are powered, so I'm thinking it's a CPUz thing??? Could it be I'm not getting enuf power to the last 2? I think I'll turn up the juice to the lanes on the next run and see if that changes anything

[MaadDaawg]

Originally Posted by punx223

for SS just open superpi and run/minimize take ss

At the risk of appearing dense.... huh?

[GFDuke]

Originally Posted by MaadDaawg

At the risk of appearing dense.... huh?

I think what he is saying is, open and run super pi. It will make your cpuz showits true settings cause it will be under load. so yea ope super p[i, run it and minimize so its not in your ss. Then take your ss while superpi is running.

[DOM]

Originally Posted by GFDuke

I think what he is saying is, open and run super pi. It will make your cpuz showits true settings cause it will be under load. so yea ope super p[i, run it and minimize so its not in your ss. Then take your ss while superpi is running.

or he can just disable speedstep in the bios

[punx223]

Originally Posted by DOM

or he can just disable speedstep in the bios

sometimes theres issues when disabling speedstep unfortunately lol.....

thats why on 3D os I always have Superpi on desktop and ready lol

[MaadDaawg]

Actually, I disabled it this morning in the BIOS before I ran any of the benches. Interesting idea though.

What sort of issues does disabling it in BIOS create?

Could that be why GPUz shows only 2 GPUs enabled?