[DOM]

Thanks need to see what it does on the ss it was sitting at 50c lol

Just got done playing some bf3 took forever to finished

[Witchdoctor]

Originally Posted by DOM

got this on air

http://valid.canardpc.com/show_oc.php?id=2153192

just built a gamer for a guy that booted at 57 on a FRIO

only had about an hour to play with it though

2500\s Rock

[Gutterz]

So I did my first SB Ln2 session last night an it was a complete fail. I know SB dont scale on Ln2 that much, but I wasnt able to beat anything I did on air. Raising vcore, vccio or cpu pll
didnt help. It seemed like the cold handicapped me. The mount was good upon taredown, that was my only suspension of what could have been the issue.
So can you have a crap chip that max's out on air?

[DOM]

Originally Posted by Witchdoctor

just built a gamer for a guy that booted at 57 on a FRIO

only had about an hour to play with it though

2500\s Rock

i can boot in the bios with x58 but idk how high i can get it to make it in windows untill i get it on the ss im just on a 212+ evo

Originally Posted by Gutterz

So I did my first SB Ln2 session last night an it was a complete fail. I know SB dont scale on Ln2 that much, but I wasnt able to beat anything I did on air. Raising vcore, vccio or cpu pll
didnt help. It seemed like the cold handicapped me. The mount was good upon taredown, that was my only suspension of what could have been the issue.
So can you have a crap chip that max's out on air?

in my experience yes, on my 2600k i cant get 5.6 unless its on the ss but on water i can get 5.5

so its not much more oc i can get on cold

on the ss i can run 4c8t on water i cant so thats the big advantage

[Splave]

Hey gutters what temps?

I use
1.685 core
.85 vccsa
1.125 vccio
1.5 vpll
1.75 dimm

Right around -30c on ln2
What kinda codes you getting?
Sometimes it will say oc failed but will keep the speed and press f1 to bios then esc out without saving changes and it boots.

[Gutterz]

I tried from -15c to -90c I didnt notice any codes when it says OC failed.
It does a OC fail once every boot cycle maybe twice but then will boot with same settings run fine then. That can happen even on a 4200mhz overclock too not just max clock.

These are my max air settings
104 bclock
54x
vcore 1.57
vccsaio 1.11875 vccsa an vccio are tied together on the z as far ad I read. ???
Dram 1.65
cpu pll 1.8125

Here is a bios shot of the Digi VRM/Power tab are these rite?




The rest of my settings






Tried auto on skew driving voltages to

[MaadDaawg]

definately want to enable the extreme tweaking.

I also enable my bandwidth booster though I don't know if it helps or not

[Gutterz]

Originally Posted by MaadDaawg

definately want to enable the extreme tweaking.

I also enable my bandwidth booster though I don't know if it helps or not

I usualy do have extreme tweaking enabled. But that only enables the tool from windows to work correct?

[Patch]

Gutterz, try this:

D/C overtemp protection
Lower your vpll to 1.5-1.65v
Increase dram to 1.7-1.75v+
Increase PCHv to the first yellow or the hightest white level

[DOM]

Nice B-Day for ME

i set 57 and 59 came out