here ya go supes ... refound this as I used to have to do this when running XF
if you make a profile in catalyst after turning on Overdrive( make sure clock and memory settings are correct). You can then go to the file "C:\Users\Bretware\AppData\Local\ATI\ACE\Bretw are. XML. the xml file will have the same name as the catalyst profile you saved. right click and hit edit.
<Feature name="FanSpeedAlgorithm_0">
<Property name="FanSpeedAlgorithm" value="Manual" />
</Feature>
<Feature name="FanSpeedRPMTarget_0">
<Property name="Want" value="0" />
</Feature>
<Feature name="FanSpeedPercentTarget_0">
<Property name="Want" value="65" />
Change the value to "manual" and Want value to "65"
Save the file then reload your profile in catalyst.
65% seemed perfect for me, 70% was loud but you may need it if your case has poor air flow.
You will may have to select the profile everytime you start the computer, but it will work until there is a fix or better info so i can figure how to change the auto target temp.
what ever you change the value to is what they will run at so you will have to make two profiles ... one for gaming and one for surfing probably
good luck
Sucks having to load your profile every time but is does work
__________________
You don't need a reason to help people
Last edited by Witchdoctor; 07-20-2010 at 07:19 AM.
|
acebook
I'd be snappier too!
Linear Mode
