Ride or Die OCA4LIFE!
Log In:

Notices

Volt Mod's CPU, GPU, Mobo, PSU, etc...

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-28-2011
ThreeDhero's Avatar
ThreeDhero ThreeDhero is offline
OCA Gladiator
 
Join Date: Jul 2010
Location: Cincinnati, Ohio
Posts: 402
Rep Power: 16
ThreeDhero is just getting started
Default EVGA 9600GT Vmod

Having a hard time with this card so far I've been able to reach 880/1045mem @ 1.44vgpu and 2.05vmem in 06, load temp on WCing is 32c max. Card is hit or miss @ 900core pretty much seems like passed a few times but just luck I think. I've tried all the way up to 1.5vgpu no help. After hitting a wall with the gpu I did the Vmem used a 100k vr turned it all the way down giving me 2.2v which is rated max. I couldn't get the card to pass at 880/1045 thinking the block could have been too tight. Currently prepping the card for 0-7c and I've taken off the 100k vr for the mem. Any thoughts to why 900 passes once in awhile or is there anything I could try to get a higher OC?
Also I'm using 6.3v 1000uf caps I might have some 2.5v 826 uf on a dead board.
All the votlage to the gpu is done from the Vid switch mod, trying to fine tweak the Vgpu 100k vr hits OCP pretty easy.



__________________
"But seriously anybody know anything about launch coooodes"

Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -10. The time now is 09:05 AM.

Copyright ©2009-2014, Overclockaholics

Designed by: vBSkinworks