EVGA 9600GT Vmod
 

Having a hard time with this card so far I've been able to reach 880/1045mem @ 1.44vgpu and 2.05vmem in 06, load temp on WCing is 32c max. Card is hit or miss @ 900core pretty much seems like passed a few times but just luck I think. I've tried all the way up to 1.5vgpu no help. After hitting a wall with the gpu I did the Vmem used a 100k vr turned it all the way down giving me 2.2v which is rated max. I couldn't get the card to pass at 880/1045 thinking the block could have been too tight. Currently prepping the card for 0-7c and I've taken off the 100k vr for the mem. Any thoughts to why 900 passes once in awhile or is there anything I could try to get a higher OC?
Also I'm using 6.3v 1000uf caps I might have some 2.5v 826 uf on a dead board.
All the votlage to the gpu is done from the Vid switch mod, trying to fine tweak the Vgpu 100k vr hits OCP pretty easy.

http://img220.imageshack.us/img220/8...c04239x.th.jpg
http://img207.imageshack.us/img207/7243/dsc04237.th.jpg
http://img141.imageshack.us/img141/8...c04236j.th.jpg

the 8800/9800 series scales well with 0C temps...32c won't cut it for 950mhz+

nice mods ..

Ahh I see hope I can get it cold enough...
Hope the ribbon switch looks nice took me about a half an hour solder just right, could have ripped it apart but where's the fun in that lol

how hard is it to solder something on a vga pcb board?

It's not really to hard just need a steady hand and learning to tin makes the job much easier. My problem was not tearing apart the wires so I had to be careful to not pull off wire 1 when soldering wire 3 ect...
Also using a 40 watt gun doesn't help lol I've burnt up some pads along the way.
Like overclocking I've found there's tweaks and helpful tips to make it enjoyable.

There's only one way to find out. Get-er-done homie.