PUNX can you take pics of your 460s?
 

we need to figure out the vmod for the compo :thumbsup:

are they all the same pcb ? whats the mem size also ?

1gb I believe they are all reference this early in the game

got them off of TPU
 

http://www.techpowerup.com/reviews/Z...ages/front.jpg




http://www.techpowerup.com/reviews/Z...mages/back.jpg

I thought nV released these to have non-reference pcb's right off the bat. There are already pretty hefty stock-clocked versions available. Bet those are cherry cores?

Quick google shows refernce boards.


Also shows no voltage control on anything but ASUS 460s.... oooooo

Hope EVGA comes out with one, as I want to give the 460 a turn n burn....

which comp is this?

I imagine the QuakeCon 2010?

do you know what cards you will be using??? can you get me a copy of the stock bios?

I can mod it for more voltage.... check out my hwbot sub, taht was soft modded bios

we will be using 1gb 460s
hell I will slap an evga bios on there if we have to!

I have a bios for EVGA 1gb 460 taht unlocks software voltage control to like 1213 mv

thats the one i used for my #1 spot sli 460s on hwbot. and thats on air.


seems like cold doesnt do alot for these cards though.... your talking 100Mhz tops, maybe a little more unless something changed

Well we are gonna have to figure out some kind of edge. Splave said they don't mind bios flashes, so lets at least get that. We can see what kind of voltage smart doctor offers then flash to evga if necessary.

I might have a unlocked maximum voltage Asus SmartDoctor for you guys, but I doubt it's going to be of any help on anything colder than single stage ( phase change ) since those cards suffer from the Cold Slow bug and I haven't seen any mods/BIOS for those.

Thx Bill, Rom was just asking me about this today :thumbsup:

BZ I <3 you :D :thumbsup:

does the reference 460 use the chil controller? my eyes are weak

wassup BZ

Asus StupidDoctor

Sorry for the... very delayed upload.

any word of cold slow fix on these?

Unfortunately the answer is no :-(

Whats the word from rickster! I thought he benched this thing for the BOT competition under cold? :ohcrap:

Here is the modded bios for the GTX 460 Hawk if it is of any help. It has voltages unlocked.

You dah man Rick :)

just cuz I have not done it myself.

Can you crank speeds close afterburner reopen it and crank it more?

Heard it somewhere.. I dont 3D ...
specifically on the 460 hawk too...but for non ABX users

AFAIK the only way to crack the frequency limits ( sliders go only up to 100% ) is by re-programming the card's BIOS with higher default freqs.

Thanks BZ... I know you have a lot of experience in this hobby. Are you saying you tried this and it did not work? Or just that it does not on principle?

Would like to know, I have not tried this as a rule on vid cards but never had a 460 Hawk either to try it on. Which is why I think I said I read it...


Would it be uber helpful if it was true? Doubtful on this team ;) :)

It's bulletproof.
Raising the clocks with Afterburner ( on a stock BIOS card ), closing it and re-opening it won't allow you to go any higher than you could go before.

Another reason to go for eVGA eLeet, no clock lims ( unless you think your card can do 2500MHz GPU Core clock that is :D ) and functional voltage control for most cards ( don't know if it works for the GTX 460, only tried it with the 480 ).

If it doesn't, I'd simply raise the voltage with Afterburner or Asus StupidDoctor and then overclock the card with eLeet.

rgr that thanks :)

Are you using the stock eLeet or is there a special unlocked version?

Here's the version I'm using

You change the second ( up to down ) "3D Performance".
Notice that after you apply a clock change, regardless of letting the app run or quitting it, if you want to change the clocks again you have to select the same entry on the drop-down menu, ( 4th selection if I recall correctly ) which shall be "Unknown" instead of 3D Performance now.

This one works like a charm for sure, don't know if the latest stable version on eVGA's website works perfectly, but it should.

Have you guys tried Afterburner 1.6extreme with modded .bat file...???
You gan go as high clocks as you like for mem and core plus it gives you plenty of voltage to play with...
But i don't know if it works with 460 cards af far as voltage is concerned but please try out...

http://www.benchzone.com/Downloads/M....60_Beta_6.rar

Bill if it's not ok with you give me a call to edit it...:)

Thanks a ton crusty! :thumbsup:

I don't think we've got that one Toni, thx ;)

Anthony I'll kill you for linking my files :taunt:
I'll kick your sorry bottoms :thumbdown:

haha, just kidding bro, it's fine ;)

Infidel! lol

The only version of Afterburner I could get to work correctly was 2.00 Beta 7. As you know for the contest I had to have Afterburner open...with this one I could clock up to 1044/1218 before the card took a leave of absense.