e762 post code 62 at cold boot
 

Very strange, with the A0 locked and loaded I get F3 F6 F3 62 and hangs on 62. Thought it was CBB but at same settings its moving around 20+c. Sometimes I can boot -118 sometimes it takes -89 to boot. Very weird. Also after a BSOD or freeze the reset button is unresponsive then it will shut off and on reboot it will post F3 then cut power, F3 then cut power and will keep doing this till I clear cmos.

BTW with the A0 it defaults cpu pll to 2.05v :blink:

This chip is very illogical, and completely random but nasty as fauk :thumbsup:

I ran out of ln2 in my pitcher and had to head to work so I was at -85c and for fun it passed pifast at 5.9ghz 1.75 volts rofl.

Maybe try one of the older beta BIOS made for the A0's? Kal has a good one he could send you.

would be great

The newer BIOS defaults to 2.05 for some reason when the jumper is moved. My 759 does it too.


http://kingpincooling.com/forum/show...76&postcount=1

oh cool so thats normal

Yup, my 760 shows the same.... using bios 56.

still worried about 62, its annoying as hell.

PM Kal for that BIOS he uses. He loved it.

What jumper on the 759? the CSC Strap by the dimms?

The jumper beside the NB and behind the memory dimms. X-cool I think is what it is. Has anyone played with the strap jumper?

nope never tryed

Never had a the 62 postcode before.

But I've seen the F3/power off cycle many times. Sometimes just shutting down the PSU for a sec without clearing CMOS will break the cycle.

Shammy responded to you Splig. :thumbsup:

guess I will have to check my slots and mount, great having shammy around :)

same here

but, my 762 defaults to 2.02 cpu pll as well ??

Have to check Shammy's Lair lol