| DICE & LN2 Cooling If You Have A Pot... |
 |
|
02-12-2010
|
 |
OCA Gladiator
|
|
Join Date: Jun 2009
Posts: 1,183
Rep Power: 17
|
|
Got GD70 + 965 C3, does it have much boints in it???
So yesterday got the GD70 + 965 C3 for some AMD testing, but seriously this is my first AMD after around like 5 Years? or maybe more......and have to return it back within a week or two, so no time to learn as well
Any help or tip with ocing on AMD??? Gonna put it under LN2 next week, buck looking forward for your inputs, any specific AMD tweak that I should be looking for???
Hoping to crack atleast 6.2Ghz, oh and I dont have a temp. probe yet, though it should be here by next week but I guess with AMD its not much of a concern???
Also for 3d Test, I have seen some of the AMD setups doing more damage than even i7, so what are the specific benches where I can run AMD setup??? Dont wanna waste my time running benches which I have already cracked with i7 on 5.1Ghz.....
__________________
EVGA Classified (MSI Pro-E, MSI Eclipse, DFI DK45 T2RS Plus, Foxconn Mars), Core i7 980 (Core i5 680, Core i7 950 Intel E8600, Intel QX9650, Intel Core2 Duo E8400), Thermalright Venomous X(CoolerMaster AquaGate mini R80), GSkill Trident 1600Mhz CL6 (GSkill 6400 2 x 1 GB @ 1260Mhz) , MSI GTX 580 (EVGA GTX 295, Asus 4870 x2, EVGA 9800GX2, Visiontek 3870 x2, XFX 8800GT), DELL E248WFP Monitor, Stacker 830 Nvidia Ed., CoolerMaster Real Power Pro 850W, Altec Lansing 641 400 RMS Watts with Auzentech X-Plosion, 1TB + 500 GB + 500GB HDDs
|
02-12-2010
|
 |
Senior Overclockaholic
|
|
Join Date: Jun 2009
Posts: 1,162
Rep Power: 17
|
|
Quote:
Originally Posted by thebanik
So yesterday got the GD70 + 965 C3 for some AMD testing, but seriously this is my first AMD after around like 5 Years? or maybe more......and have to return it back within a week or two, so no time to learn as well
Any help or tip with ocing on AMD??? Gonna put it under LN2 next week, buck looking forward for your inputs, any specific AMD tweak that I should be looking for???
Hoping to crack atleast 6.2Ghz, oh and I dont have a temp. probe yet, though it should be here by next week but I guess with AMD its not much of a concern???
Also for 3d Test, I have seen some of the AMD setups doing more damage than even i7, so what are the specific benches where I can run AMD setup??? Dont wanna waste my time running benches which I have already cracked with i7 on 5.1Ghz.....
|
GD70 is not a Giga board ?
I have only used Giga boards. Dial your RAM in nice and tight before you start, remember MEMTEST is your friend 
But just pour LN2 until its nice and cold, 6.2ghz should not he that hard to get to I would think.
I did this on Dom 1600 RAM so if you have better you should be past that np
http://www.hwbot.org/community/submi...be_6146.74_mhz
Last edited by Buckeye; 02-12-2010 at 07:06 PM.
|
02-12-2010
|
|
OCA Gladiator
|
|
Join Date: Jun 2009
Posts: 1,183
Rep Power: 17
|
|
Quote:
Originally Posted by Buckeye
GD70 is not a Giga board ?
I have only used Giga boards. Dial your RAM in nice and tight before you start, remember MEMTEST is your friend
But just pour LN2 until its nice and cold, 6.2ghz should not he that hard to get to I would think.
I did this on Dom 1600 RAM so if you have better you should be past that np
http://www.hwbot.org/community/submi...be_6146.74_mhz |
Okies, thanks, Mine is a 1600Mhz Trident as well which have done around 2200Mhz on i7....so hopefully ram shouldnt be a limiting factor????.......
__________________
EVGA Classified (MSI Pro-E, MSI Eclipse, DFI DK45 T2RS Plus, Foxconn Mars), Core i7 980 (Core i5 680, Core i7 950 Intel E8600, Intel QX9650, Intel Core2 Duo E8400), Thermalright Venomous X(CoolerMaster AquaGate mini R80), GSkill Trident 1600Mhz CL6 (GSkill 6400 2 x 1 GB @ 1260Mhz) , MSI GTX 580 (EVGA GTX 295, Asus 4870 x2, EVGA 9800GX2, Visiontek 3870 x2, XFX 8800GT), DELL E248WFP Monitor, Stacker 830 Nvidia Ed., CoolerMaster Real Power Pro 850W, Altec Lansing 641 400 RMS Watts with Auzentech X-Plosion, 1TB + 500 GB + 500GB HDDs
|
02-13-2010
|
|
Senior Overclockaholic
|
|
Join Date: Jun 2009
Posts: 1,162
Rep Power: 17
|
|
Quote:
Originally Posted by thebanik
Okies, thanks, Mine is a 1600Mhz Trident as well which have done around 2200Mhz on i7....so hopefully ram shouldnt be a limiting factor????.......
|
Well you will be real lucky if not impossible to get that speed on a AMD board, but prove me wrong !!
Bump that NB volts up and have some fun
That was my biggest mistake for a long time, until I became fearless and said screw it, lets she what shes got 
|
02-20-2010
|
 |
Superenthusiast
|
|
Join Date: Feb 2009
Location: Krypton, Hawaii
Posts: 11,028
Rep Power: 10
|
|
Whats the word Banik?
__________________
What kind of community do you intend to re-build?
tell me your sins and I'll sharpen my knife...(Take me to church)
|
02-20-2010
|
|
OCA Gladiator
|
|
Join Date: Jun 2009
Posts: 1,183
Rep Power: 17
|
|
Have been able to do only 4.3Ghz on air, though not sure whether I am ready to drop LN2 on this setup but doing it anyways today in a few hours, Bill has sent some nice Bios screenies as well, hopefully will be able to atleast learn a bit about AMD ocing today......
__________________
EVGA Classified (MSI Pro-E, MSI Eclipse, DFI DK45 T2RS Plus, Foxconn Mars), Core i7 980 (Core i5 680, Core i7 950 Intel E8600, Intel QX9650, Intel Core2 Duo E8400), Thermalright Venomous X(CoolerMaster AquaGate mini R80), GSkill Trident 1600Mhz CL6 (GSkill 6400 2 x 1 GB @ 1260Mhz) , MSI GTX 580 (EVGA GTX 295, Asus 4870 x2, EVGA 9800GX2, Visiontek 3870 x2, XFX 8800GT), DELL E248WFP Monitor, Stacker 830 Nvidia Ed., CoolerMaster Real Power Pro 850W, Altec Lansing 641 400 RMS Watts with Auzentech X-Plosion, 1TB + 500 GB + 500GB HDDs
|
02-20-2010
|
|
Superenthusiast
|
|
Join Date: Feb 2009
Location: Krypton, Hawaii
Posts: 11,028
Rep Power: 10
|
|
Good luck brudder 
__________________
What kind of community do you intend to re-build?
tell me your sins and I'll sharpen my knife...(Take me to church)
|
02-20-2010
|
 |
OCA Gladiator
|
|
Join Date: Jun 2009
Location: South Jersey, USA
Posts: 5,645
Rep Power: 22
|
|
4.3-4.4 is easy on air with low volts (less than 1.5)
1800+ ram is tough.. tune for tight timings,, ,and recognize what the NB needs to run that early... cuz it will mean a lot later..
HT voltage.. you would not think needs being upped if you keep htlink speed down.. (cuz it improves 2D performance) but it helps with bus speeds. crazy but true.
keep htlink speeds down for 2D and at around 1300-1600 for GPU processing in the OCed 4850 CF range. (its what I tested) if bus clocking.. higher ht link speeds can help you get higher speeds (remember its a cohesive unit) but its going to drop efficiency...CPUZ yes high HTLink.. .spi/wprime/pifast? low htlink... unless you are benching them at the CPUz speeds (which most do not)
__________________
"Don't You understand? This is Greek to me! Except I spek Greek, this is like Aramaic to me, and not the Western Dialect I can read a little." - Dr. Walter Bishop
Special relativity is not "Eat Two Big Macs."
|
02-22-2010
|
|
OCA Gladiator
|
|
Join Date: Jun 2009
Posts: 1,183
Rep Power: 17
|
|
Quote:
Originally Posted by Neuromancer
4.3-4.4 is easy on air with low volts (less than 1.5)
1800+ ram is tough.. tune for tight timings,, ,and recognize what the NB needs to run that early... cuz it will mean a lot later..
HT voltage.. you would not think needs being upped if you keep htlink speed down.. (cuz it improves 2D performance) but it helps with bus speeds. crazy but true.
keep htlink speeds down for 2D and at around 1300-1600 for GPU processing in the OCed 4850 CF range. (its what I tested) if bus clocking.. higher ht link speeds can help you get higher speeds (remember its a cohesive unit) but its going to drop efficiency...CPUZ yes high HTLink.. .spi/wprime/pifast? low htlink... unless you are benching them at the CPUz speeds (which most do not)
|
wow thanks man, would keep the tips in mind, would not have thought about upping HT volts if you wouldnt have said it....
Did my first LN2 session, my temp. mounting system broke under LN2 just after getting this result in, so hopefully would be able to run a full battery of test next time......
__________________
EVGA Classified (MSI Pro-E, MSI Eclipse, DFI DK45 T2RS Plus, Foxconn Mars), Core i7 980 (Core i5 680, Core i7 950 Intel E8600, Intel QX9650, Intel Core2 Duo E8400), Thermalright Venomous X(CoolerMaster AquaGate mini R80), GSkill Trident 1600Mhz CL6 (GSkill 6400 2 x 1 GB @ 1260Mhz) , MSI GTX 580 (EVGA GTX 295, Asus 4870 x2, EVGA 9800GX2, Visiontek 3870 x2, XFX 8800GT), DELL E248WFP Monitor, Stacker 830 Nvidia Ed., CoolerMaster Real Power Pro 850W, Altec Lansing 641 400 RMS Watts with Auzentech X-Plosion, 1TB + 500 GB + 500GB HDDs
Last edited by thebanik; 02-22-2010 at 07:56 AM.
|
02-22-2010
|
|
OCA Gladiator
|
|
Join Date: Jun 2009
Location: South Jersey, USA
Posts: 5,645
Rep Power: 22
|
|
Suhweet!! Nice going Banik Oh man.. think I might dump the triple channel memory I was going to buy and just grab me a c3 965
__________________
"Don't You understand? This is Greek to me! Except I spek Greek, this is like Aramaic to me, and not the Western Dialect I can read a little." - Dr. Walter Bishop
Special relativity is not "Eat Two Big Macs."
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -10. The time now is 09:23 AM.
Copyright ©2009-2014, Overclockaholics
|
acebook
Linear Mode
