Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   ATI (http://www.overclockaholics.com/forums/forumdisplay.php?f=42)
-   -   HIS 5970 Action (http://www.overclockaholics.com/forums/showthread.php?t=1499)

Kal-EL 12-14-2009 06:58 AM

I forget, lemme cool the room down again and fire up the bench rig to check. gimme a few minutes, everything is on air atm.

Kal-EL 12-14-2009 07:07 AM

Had to drop cpu speed cuz the sun's up and the room isn't cold enough yet.
sp3

Neuromancer 12-14-2009 07:59 AM

HAHAHHAHA
congrats on the WR kal!

Kal-EL 12-14-2009 08:08 AM

Well, they blocked the run and deleted it as well.

Neuromancer 12-14-2009 08:12 AM

Thats F'ed up.

Kal-EL 12-14-2009 08:18 AM

LOL, nub had a world record everyone (even if it was for 15 minutes :D )

Kal-EL 12-14-2009 09:16 AM

K, Still trying to figure out whats going on here.
ran it stock in win 7 32 and then overclocked it to the same clocks as xp 32 sp3
here is what I get:
http://www.overclockaholics.com/Kal/5970/5970%20023.jpg
OC
http://www.overclockaholics.com/Kal/5970/5970%20024.jpg

lakeside2189 12-14-2009 10:14 AM

Is the 150,200+ score in win7?????? That is still a great score....15,000 better than i could do with 2 5870's.....

What is a bug and can you sell it????:ohcrap:

Kal-EL 12-14-2009 10:27 AM

I dunno if its really a bug, this 3D06 run is also much faster than what's posted at the bot currently. No? Am I imagining it?

http://www.overclockaholics.com/Kal/5970/5970%20025.JPG

lakeside2189 12-14-2009 10:35 AM

Looks like a real sweet spot to me.....You say they deleted your post at the Bot???

How about the 150,200 + ... Did you post that....I see that is on the Bot...Usually around 6.2 on dice but it's your sweet spot.....

Shit, you go from where is it to I have it...

lakeside2189 12-14-2009 10:40 AM

The 3D06 is a good run...Fast but in the range..You have a sweet spot...Good card...I would post the 150,000 too...

Kal-EL 12-14-2009 10:51 AM

Quote:

Originally Posted by lakeside2189 (Post 19407)
The 3D06 is a good run...Fast but in the range..You have a sweet spot...Good card...I would post the 150,000 too...

I gotta see what them Europeens have to say about the 03 bug first or they'll just keep blocking.

Kal-EL 12-14-2009 10:53 AM

Heres a solid 05 run that owns others with higher gpu clocks too, I havent' bothered to reboot during all these runs either so I reckon they'd be higher with a proper reboot:
http://www.overclockaholics.com/Kal/5970/5970%20026.JPG

lakeside2189 12-14-2009 10:57 AM

This is where I have problems with the Bot..They won't score you on the 06 run because you once had a higher score with a totally different card...or cards

That is a great score with the 1 5970 at 5.75..

Lets have our own OCA Bots.....I like your 03 bug and would like to see it posted...The 150,000 is worth 50 points....

Nice 05 run....I could be wrong about them not scoring you if you had a higher score but they wouldn't score me unless I beat 2 4870x2's..Not really sure anymore how things work...

Kal-EL 12-14-2009 11:06 AM

AQ3 325437 seems a bit high for the clocks as well, no?
http://www.overclockaholics.com/Kal/5970/5970%20027.JPG

lakeside2189 12-14-2009 11:11 AM

NO, that is just a good run..I did 333,000 at 4.6 with 1 5870..That is a keeper...Unless you have a better score before with 1 card..

either way it is in the range!!!!!!!!! Just a good run...

It looks like the 03 is the only bug

Kal-EL 12-14-2009 11:26 AM

Upped CLocks:
http://www.overclockaholics.com/Kal/5970/5970%20028.JPG

Neuromancer 12-14-2009 11:40 AM

Cant verify on 5970 of course but I know on my other cards... you can run much higher clocks in AM3/01 than 06/Vantage.

You saving up for a rainy day kal ? ;)

Kal-EL 12-14-2009 11:44 AM

Quote:

Originally Posted by Neuromancer (Post 19417)
Cant verify on 5970 of course but I know on my other cards... you can run much higher clocks in AM3/01 than 06/Vantage.

You saving up for a rainy day kal ? ;)

Yah, I'm not sure what volts to give it Jewknow?

Gunslinger 12-14-2009 12:11 PM

Try posting your scores at the bot using only the validation link. :D

There were '03 "bug high" 4870X2 cards out there, and those scores were not blocked...

Neuromancer 12-14-2009 03:09 PM

Dependso n your Temps, how are your VDDCs holding up? Looks liek 1.2-1.25 is pretty normal although these guys are saying 1.34v for near 1000 MHz

As long as VDDC temps are good (along with the obvious core temps) I dont think I would go much past 1.3 on stock cooling.

(I almost kept a straight face the whole time I typed that :) ) I was pushing 1.45 on the 4890 with the stock cooler, would push it higher, but I think that is the max that the card can actually push. Saw no benefit running 1.46+ :)

RomDominance 12-14-2009 04:09 PM

5 Attachment(s)
Here is a little group of my results with the 5970 Kal. Most of the time I was at or around 1280 to 1315mv for these clocks. Hope this gives you a reference point or two.
GL mate :alien:
Attachment 1022

Attachment 1023

Attachment 1024

Attachment 1025

Attachment 1026

Kal-EL 12-14-2009 04:31 PM

Quote:

Originally Posted by Neuromancer (Post 19425)
Dependso n your Temps, how are your VDDCs holding up? Looks liek 1.2-1.25 is pretty normal although [url=http://www.bjorn3d.com/read.php?cID=1741&pageID=8070]these guys are saying 1.34v for near 1000 MHz

As long as VDDC temps are good (along with the obvious core temps) I dont think I would go much past 1.3 on stock cooling.

(I almost kept a straight face the whole time I typed that :) ) I was pushing 1.45 on the 4890 with the stock cooler, would push it higher, but I think that is the max that the card can actually push. Saw no benefit running 1.46+ :)

ROFL :taunt:

Quote:

Originally Posted by RomDominance (Post 19432)
Here is a little group of my results with the 5970 Kal. Most of the time I was at or around 1280 to 1315mv for these clocks. Hope this gives you a reference point or two.
GL mate :alien:
Attachment 1022

Attachment 1023

Attachment 1024

Attachment 1025

Attachment 1026

Thx for the point RD, I haven't gone past 1075mv.

karmakazi 12-15-2009 03:20 AM

Sorry to respond so late, but they will block all those 03 bug high scores because of GT3 I think (its about double a non bugged run).

Mike is right though, just sumbit a valid and it might get left alone

Kal-EL 12-15-2009 03:57 AM

Superman never lies........................ :cool3:

RomDominance 12-15-2009 09:08 AM

Is that a bird or a plane? No, its super nonsubmissionofbogusruns man! WOOT!
I always knew you were a super kewl dude!:good:

lakeside2189 12-17-2009 02:13 PM

Time is not on my side now but thought i would try 1 card at a time to see if any issues were there...Using the 9.12 drivers and win 7 64. The HIS card is strange. The AB doesn't work the fan. You have to do that in CCC...Also can't seem to clock the card over 837/1143...
As a single card it is much faster than the 4870x2 top...Gained about 15 points but will lose them come 1/2010....

With 96 churches in the Diocese in Florida I am extremely busy but will find time to make a few runs....

http://i420.photobucket.com/albums/p...1275735970.png

lakeside2189 12-17-2009 03:00 PM

Vantage won't even make it through the first test without atleast 1250 GPU voltage @815/1130....This is run in win 7 64 with 9.12 drivers
http://i420.photobucket.com/albums/p.../257035970.png

karmakazi 12-17-2009 03:09 PM

win7 32bit for vantage... trust me ;)

lakeside2189 12-18-2009 01:31 PM

This HIS is a piece of chit...I can't believe the one I paid for is a brick...It's not just the drivers...The fan only does about 50% on full and it atifacts at stock speeds....Not only that but I am having all kinds of problems I know are not driver related..I used it in Vista and win 7 32 and 64 and it goes appe shit!!!!!!!!!!!!!

I don't want another one....:scared::scared::scared::scared:

I am going to write newegg and tell them to refund or change brands....Soups had a bad one now me......

Also the fan sounds like a bad harddrive crunching.......I read somewhere if the fan is noisey push it in...I tryed that..Can you imagine paying almost 700 in coin and having to PUSH THE FAN IN!!!!!!!!!!!!!:thumbdown:

Back to work..Next up the XFX....

I know I am sounding like a lil Bitch but i hate bad stuff....If you don't have it right stay with it until it is.....For 700 I don't want to rebuild the fan...

sorry....just needed to ventpullhair

Kal-EL 12-18-2009 01:49 PM

Vent noted.

Lakeside Hwbot boints gained today also noted :D

lakeside2189 12-18-2009 02:08 PM

I can't believe you brought the points up...:blush::blush::):laughing:

I will take the points even if it does artifact and crunch along....

also, Soups, I can't get past that error in 06....after the firefly run.....

Should have some time this weekend to try the other card...Will have to atleast have the egg send another.. Hopefully one that the fan is not grinding.....

Kal-EL 12-18-2009 02:37 PM

How are you running it right now?
CCC? Afterburner? Riva?
Specifically from boot into os till benchmark run.

lakeside2189 12-18-2009 03:19 PM

I ran the 9.12 drivers..CCC and AB for benching....The card was OK but buggy the first day....I did a few benches....
I am on call so not much constant time until after Christmas....

The second day is when the fan started crunching...Also artifacting at stock speeds.. On the second day i couldn't start the PC in win 7....Some driver issues but also some hardware stuff to....I should have time to switch out the cards on Sat....

There is no way my little benching should have hurt it....I could never get it to run over like 825/1130....

I really should just have waited until after Christmas because of the constant on call stuff but you know how it is...I usually work normal hours except for Christmas and Easter....

The fan was never right..It comes up slow but stops at 58% even on 100% and raises heck.....AB won't work the fan..You can only get it to come up to 58% with CCC

3D06 will not run...The error I mentioned..That could be driver related..Not sure....

I will RMA it and run the other as soon as i can get it in....I need sometime to spend with it..Not 1 hour here 1 there.......

Kal-EL 12-18-2009 04:02 PM

RMA is prolly a good idea. Hard to blame all things on drivers.

lakeside2189 12-28-2009 01:57 PM

I see that the egg has these again and have gone up in price...I still have heard nothing from them on return but it doesn't look like refund will be happening....

But one never knows....

http://www.newegg.com/Product/Produc...82E16814161311

Kal-EL 12-28-2009 02:19 PM

Those s.o.b.s need to ship me a new one so I don't get hosed on the shipping.

lakeside2189 12-28-2009 02:29 PM

They have been for sale for atleast 30 min...

Kal-EL 12-28-2009 02:46 PM

Man I hate being put thru the wringer just to get a fair shake at things. They are shipping a new one to me with free shipping.

lakeside2189 12-28-2009 03:01 PM

Good man!!!!!!!!!!!!!!!! I wish i would hear something....I guess i will have to call.....

Can you believe they have went up again??????


All times are GMT -10. The time now is 04:38 AM.


Copyright ©2009 Overclockaholics.com