[Kal-EL]

O.k. wenches, send me ur best of breed bench os's and label them accordingly so I know which is which. I'll then host them on the site server for Hwbot Members and Premium Subscribers to download as they wish.

[HITandRUN]

Originally Posted by Kal-EL

O.k. wenches, send me ur best of breed bench os's and label them accordingly so I know which is which. I'll then host them on the site server for Hwbot Members and Premium Subscribers to download as they wish.

That's a great idea! This way everybody can brainstorm a copy and see what else needs to be cut out!

[Chuchnit]

I'll get them in the mail buddy

[Buckeye]

If I used a D-Link Wireless adapter and used the driver for those then I didn't use the 3 Com drivers ?

[Kal-EL]

Using pll ICS952018AF right now but can't seem to get over 150x15 @1.95vCore on the Williamette 1.5ghz P4.

Its still early tho.

wrong pll, use ICS952607EF

[Buckeye]

Originally Posted by Kal-EL

Using pll ICS952018AF right now but can't seem to get over 150x15 @1.95vCore on the Williamette 1.5ghz P4.

Its still early tho.

wrong pll, use ICS952607EF

Use the ASUS OC Utility thats on the disk. You can change vcore and FSB with that. I did not use SetFSB at all.

The PCMark05 screen is from a different chip but you can see the OC utility there.

[Buckeye]

Just another tip that I found while benching those chips.

As you can see they came from Wired Stuff, or most did anyway. I have no idea where they came from, or how long they sat idle. That place is a recycling place to they came from just about anywhere.

When I would start to bench a new chip jammimg the OC and vcore up right off the bat was not a good idea. What I did was start them out at stock at run Prime for a few hours, then slowly start upping the OC. I would get the best results doing it that way.

On my Chilly1 Phase they hardly touched the temps on it as they have little heat output. I do not know what the cold bug on those chips is.

[HITandRUN]

Originally Posted by Buckeye

Just another tip that I found while benching those chips.

As you can see they came from Wired Stuff, or most did anyway. I have no idea where they came from, or how long they sat idle. That place is a recycling place to they came from just about anywhere.

When I would start to bench a new chip jammimg the OC and vcore up right off the bat was not a good idea. What I did was start them out at stock at run Prime for a few hours, then slowly start upping the OC. I would get the best results doing it that way.

On my Chilly1 Phase they hardly touched the temps on it as they have little heat output. I do not know what the cold bug on those chips is.

The slow Vcore thing is very interesting.

[tanka12345]

So awesome using the 478! I love the look of the 7800GS. Wish I had a good AGP card for my old rig cool2

[Kal-EL]

Asked in other thread, did u really need to sub-zero the nb on this s478?