Quote:
Originally Posted by kikicoco1334
i don't really know what to look for tbh
i have only done SLI mod on intel boards that's all
btw i did the jumper but it's not letting me going up any higher than 3.2v tops
unless i am missing something
|
After you move the jumpers, in the bios , in the voltages, there's a function that says something like "enable if over 3.2v". You have to enable that also. Then you should be able to select Vdimm up to 4.0v.
If you have trouble, I'll post pics of my board and bios to help you get through it.
You should also know that BH-5 will only work in the Yellow slots, and if you're only using 1 stick it has to go in the Yellow slot farthest away from the CPU, or it won't boot.
As for modded bios', the 623 bios is pretty freakin' good, second only to my own modded bios. Use the correct variation for the type of ram you'll be running.