Quote:
Originally Posted by Splave
CB is the same dual and try. I was running 1.85pll will try lower but ran out of ln2.
6057mhz passed at -130 1.72v  didnt save the time though and ran out of ln2 more tomorrow |
1,85 PLL is way too much for any chip, try lowering your PLL to 1,45 and start from there. PLL and VTT is pretty much the main reasons causing cb to processors. If you had a -130 coldbug by using 1,85, then at 1,45-1,50 you will have no cb at all.
If you are lacking stability, try raising you PCI frequency to 110MHz or even higher.