Quote:
Originally Posted by HITandRUN
Same on this end just Samsung mem. We'll see.
BTW: Is this the mod you will be using?
 |
No I have the 584 with infineon chips. Worse mem clocks but longer lasting RAM...thats for the original 7900GT's.
It's similar but OCP is said to be different (although they don't work apparently on the newer cards) the left OCP chip in that image is actually add a 100K in parallel (or pencil mod it to 47K) for switching frequency stability beyond 1.2volts.
http://www.xtremesystems.org/forums/...61&postcount=2 This post explains it.
vMem is the same i think but even with mod not expecting more than 900MHz due to the ICs.
Quote:
Originally Posted by FACE411
I would just slap it over top of it and check it w/ the dmm.... The worst that can happen is it will not work.  |
Thanks will do that...
Curious though these mods are showing 10K 50K 100K variable resistors being added and what I measured on both 7600s and the 7900 the resistance ranges from .44 kOhm to .67kohm without power applied... (would not think it needs power applied for resistance maybe it does though).