Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=38)
-   -   I7 920 C Batch??? (http://www.overclockaholics.com/forums/showthread.php?t=1537)

Gutterz 12-21-2009 10:38 AM

I7 920 C Batch???
 
I stopped in microcenter today to see if they had any 920s that were packaged before October. While going threw them I found a C batch. Packaged on 9/17/09
Batch 3917C043. So I picked it up cause Ive never seen a C batch.

I havent opened it up yet, I started Googleing an came across 1 post on XS an 1 post on hard forum saying they have one. But noone has posted how the chip clocks or seen any screenies. Has anyone here had one of these chips?

DrNip 12-21-2009 10:43 AM

Whoa you might have just snagged a killer chip or from a killer batch as post 3 here shows in his sig to have one at 4.4ghz @ 1.328v load. Not too bad.

http://www.overclock.net/intel-cpus/...i7-920-d0.html

Only one way to find out. Pop the top and overclock it!

DrNip 12-21-2009 10:52 AM

Here is a thread started by the person and his c batch.

http://www.overclock.net/intel-cpus/...-i7-920-a.html

Gutterz 12-21-2009 10:52 AM

Thanks Nip

DrNip 12-21-2009 10:53 AM

Ain't much in that thread along the lines of screenshots or anything but at least we know they do exists besides yours.

Gutterz 12-21-2009 10:58 AM

Rite. I thought I seen that on hardforum. But it was the thread you just posted lol.

Alrite Im about to throw this thing in. The best 920 Ive ever had had a stock Vcore of 1.112 all chips after were 1.24-1.28 stock voltage. Ill post back in a bit see were this chip is at

DrNip 12-21-2009 11:13 AM

Just depends on what mobo you are using too. My DFI defaulted mine around there but my Classified puts me around 1.25v. Of course then again I could just be smoking crack and imagined this but pretty sure of this. Wish I still had my DFi to test this theory.

Buckeye 12-21-2009 11:15 AM

Never mind LOL :)

DrNip 12-21-2009 11:27 AM

Haha here is what it was when defaults were set. Maybe I was smoking crack. I love it!

http://i269.photobucket.com/albums/j...rell/Stock.jpg

Gutterz 12-21-2009 11:35 AM

Im on the 759 Classified. All the 920's Ive used had all differant First boot stock Vcore.
After I clock them an run them for a bit, the stock setting is even higher when I go back to default lol like 1.32 an chit.

This chip starts at 1.20 vcore still lowest Ive seen out of my last 5 chips of October an up.

So Im going to Prime this for a few hrs set at 1.00 vcore after vdrop .964 for the heck of it. I wonder If I do that an clear Cmos if the default will be lower???
Time to eat im starvin.

http://i39.photobucket.com/albums/e1...f/GEDC1214.jpg


All times are GMT -10. The time now is 04:06 PM.


Copyright ©2009 Overclockaholics.com