[Team.AU] Corsair Dominators 2000GT C7 retail kit + EVGA Classified = magic
 

Hey fellas

I seem to be in this perpetual "testing" mode but i tell you what, I love it. Getting the end results is nice and all but getting to it is even more fun.
Always great to talk(&pick his brains) to my mate youngpro during these sessions :up: who is about to unleash a storm from downunder so watch out for that.
Good to always catch up with the usual suspects during benching you know who you are :p::D

So in my preparation i've battling with the following components in intial stages :)

Test Configuration:

• EVGA CLASSIFIED E760 (S610 bios)
• Intel Core i7
• 6GB 2000GT Corsair Dominators CAS7 DDR3 > Week 22, 2009
• Asus 4870X2 Graphics Cards
• 1000W HX1000 Corsair PSU
• 1hp C-BuZz Single Stage (kayl evap)
• 160GB IDE Hard Drive
• Windows XP Pro 32bit SP3

http://img525.imageshack.us/img525/8985/86789895.gif

http://img160.imageshack.us/img160/3438/classi2.gif

http://img401.imageshack.us/img401/7025/logoexi.gif
excuse my non-fancy photochop skillz :p:




The purpose of all this testing i guess it to be able to at least get a rough idea what sort of settings i will have a chance to try on LN2 before i start going cold.
I like to pretest on SS to not waste LN2 i guess and i get to concentrate on what i'm doing a lot better than having to pour LN2 all the time.
Wasting money also makes no sense heheh :p:

My first concern was 2:10 RAM ratio. This ratio sucks on my Gigabyte X58-UD5.
I just couldn't get any decent clocks out of RAM past 1GHz with this ratio.
Why this ratio? Well i'm working with 25xmulti so i've got a couple of options here, to go to 2:8 CAS6 which is fine or 2:10 CAS7 which is better as i can max out the RAM as well at top clocks.
There is always the 23x multi as well which i will explore but i'll be battling BCLK here so why not start with easier setup first heheh

I'm hoping to be able to stabilise 32M SuperPi at 5.5GHz so I'll need to be able to run 220MHz bus stable right

OK so lets start there

220MHz bus stable with CAS7 2:10 RAM ratio running at 1100MHz 7-8-7-21-1T

Always start with the good old 32M SuperPi :D

http://img32.imageshack.us/img32/110...t32msuperp.png

What about 3DMARK01 >> some of the tests in 01 can be pretty taxing on system itself
can it handle , cars, lobbies, dragos >> YES IT CAN
(starting to sound like Obama :D)

http://img43.imageshack.us/img43/853...t3dmark01f.png

what about 3DMARK06
no dramas :D sorry i'm just laughing at myself now :rofl:

http://img338.imageshack.us/img338/4...t3dmark06f.png

If i needed say 5GHz + NB speed
can it handle that
hell yeah :D
http://img515.imageshack.us/img515/5...mhzram32ms.png



Let's bump it up (for insurance puporses only) hehehe
224.4MHz bus stable with CAS7 2:10 RAM ratio running at 1122MHz 7-8-7-21-1T

hmmm 224.4 * 25 = 5610mhz grrrrrrrrrr fingers crossed hehehe

32M SuperPi = Done

http://img338.imageshack.us/img338/7...t32msuperp.png


AM3 can sometimes be a biatch with RAM going too hard
not here :)

http://img32.imageshack.us/img32/117...787211tam3.png

3DMARK06 ... looks good :D

http://img149.imageshack.us/img149/7...t3dmark06g.png

will it do 1132MHz 7-8-7-21-1T.........hell yeah but now i'm just getting greedy . i dont want to push more cause i'd be devastated if these modules died

http://img338.imageshack.us/img338/6...t8msuperpi.png




This is all nice and dandy at -50C. Now i have to repeat this at -130C with 25x multi heheheh :D

Anyways i've still got plenty more testing ("fun") to do so i'll pop in if any updates occur




If you'd like to try my settings i've got the bios template attached
Let me know if it works for ya or if you have any suggestions i'm all ears :)

Mother Board Template( EVGA X58 Classified E-760 )

many thanks to EVGA for the board and a quick RAM replacement for my dead kit of Eplida based Corsair Dominators

Very nice mate! I'll have a look at my Classified next week so this will for sure help! I have done some testing on air so its time for LN2! :thumbsup: Thanks for posting this!

Good luck with the oc there Dino....are the GT's you have now still Elpida based?
If so, mine will happily run a tRFC of 59 or lower at those clocks, might help a bit to get your refresh rate up.:thumbsup:

Very nice dinoBro. Amazing ddr3 improvements these days. :good:

thanks fellas

hi mate

yeah usually at lower clocks you can get them running down to 56 maybe even 54 but from what i've been told by some TRFC might need a bump. i guess this will vary from set to set

what would the refresh rate do and which RR do you suggest

i havent really touched RR since wolfdale and even that wasnt really making a heck of a lot of difference but i am definitely interested :)

i am actually hitting a strong bus wall at around 228 with these settings
my bclk can go to 235/240 but this is what i am experiencing with these particualr settings no matter if i boot at 204 or 220
refuses to boot at 225

Very nice write-up dinos. Funny too :p If you can pull off 220*25 you will own :D Now is that cpu the 960 coming out, a 965 that cpuz is reporting wrong, or ES 965 that it has all wrong?

Your an animal dino!

wow dinos....your kit is really good, hope it won't die soon.
Now go for ddr3 WR :D lol

Sweet job Dinos !

I miss my Classified after moving off to AMD stuff, the BIOS is so much nicer on Classy.

BTW Bill, any preview on where you've gotten so far? 6ghz?

5.7ghz on Cascade so far

Not bad. How are the evap temps with a PHII load?

246.4MHz bus is ok
i can bench 1M but 8M wont go past first loop

http://valid.canardpc.com/show_oc.php?id=607138


i dont really need to push more here even if i wanted to use 23x

hehehe

very nice dinos!
What about max bclk frequency?Just for validation!:D
What is the max bclk for 3d?:D

Nice Dinos :D Is that a 960 or 965 EE? I'm confused on all these cpuz shots I'm seeing like this. You aren't the only one either. Plus what is you 3d benchable goal for this cpu?

Sweet. Why isn't it showing up as ES?

I kinda suspected the 960....couldn't understand why you were keeping the multi so low....dawg!

You'll prolly see better results at lower bclk and higher multi....TURBO OFF....of course.

In regards with the ram, I haven't screwed with the rr and my trfc stays at 59 with the 920....I do like to run it at cas 6 when below 1750 though and that makes a nice little difference when it comes to 2d in most cases.

just tightened things up a bit to see how efficient the performance is

looks good :)

http://img216.imageshack.us/img216/3...hz1017hz77.png

Nice one Dinos! On air?

RAM is on air
but CPU on SS of course
there is no way a CPU can run that high on AIR lol

Wasnt there an article about a 5ghz chip on air over at the bot a month or so ago?

ah so dino is here too :D

did some frequency testing tonight on LN2....time will improve when i tweak it properly :)

looks pretty good

was forced to run 2:8 ratio though :(
gotta figure out volts etc

not too shabby though :D

http://img407.imageshack.us/img407/5766/6m29saa.jpg

lol wtf
who let you in :D hahaha

Nice!!! Almost a WR. You got it in ya to snag it though.

After hipro5,AndreYang, Brian y., pro, dinos is in the battle too:D
Congrats mate :)

Understatement? :D Sick sick score. Imagine running 2:10 if ram is up to it :eek:

Pfft, just wait..............

j/k, very nice dinosbuddy :D

Should have my 760 Hydor Cooled up and running tomorrow with the SS for the CPU and water for the chipset & moffsets. Bookmarked your settings and I'll give em a try and let you know. In process of watering my 758 but that'll probably be a wokr or two off due to work schedule :( my DomGTs crapped out and are at Corsair awaiting arrival of the new improved version... in the meantime I'm going to try out the OCZ 2133 PC3-17000 blades and see what they'll do. Couldn't stand it at 1866 Cas 9 even as a temporary solution

haha been here for a while ... who will be first to sub 6min 20s 32M pi ? :)

Damnit dinos, I've thought about that run all day. WR or not, that is a stupid fast run. :D

its really poor efficiency but thats all i have for now

next time it'll be 2.0vdimm town good bye elpidas loi :rofl

play with voltages other than vdimm as vdimm might not help for elpida hypers

oh i dont know if you've been benching high NB but when you go hard on NB you actually have to use more vdimm for the same speeds

Yeah i know more vdimm is needed, only benched on air/water to 4700-4760mhz uncore for benching on DFI UT X58.

ah k
yeah i am tightening ram on purpose so that i dont leave any "air gaps" and instead of loosening i'd prefer to increase vdimm hehe

do you have any other suggestions that worked for you. You certainly have more experience in this part then me :D :thumbsup:

very frustrating board
again i'm hitting the FF code
was really hoping to show you fellas some clocks i figured out how to run on sunday :D......

i recorded this right at the start of the session hehe after i started figuring out CPU/RAM clocks.....

http://img269.imageshack.us/img269/7...78msuperpi.jpg

lets hope it works tomorrow :Dizzy:

woo hoo!! I take it you have the tec on the GT's? What vdimm?

no not yet

still 1.76

they will do tigher and higher no problems
those were not even my max 32M clocks ;) :D

Did I tell you I hate you yet? :D j/k