Overclockaholics Forums - P4 cpus's soon to be on the rubbish truck

Page 1 of 2

Show 40 post(s) from this thread on one page

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)

- Extreme Overclocking (http://www.overclockaholics.com/forums/forumdisplay.php?f=82)

- - P4 cpus's soon to be on the rubbish truck (http://www.overclockaholics.com/forums/showthread.php?t=844)

Kal-EL

07-16-2009 03:09 PM

P4 cpus's soon to be on the rubbish truck

Finally got around to the P4 project. So far soo good, just getting things situated and the operating system installed. First time on this platform for the noob4life so it should be fun.

Here are some teaser shots, hope to be dicing out by this weekend for some bwnage.

http://www.overclockaholics.com/Kal/...s/100_2649.JPG

http://www.overclockaholics.com/Kal/...s/100_2650.JPG

http://www.overclockaholics.com/Kal/...s/100_2651.JPG

http://www.overclockaholics.com/Kal/...s/100_2652.JPG

http://www.overclockaholics.com/Kal/...s/100_2653.JPG

<<HANNIBAL>>

07-16-2009 09:10 PM

lol nice
I also got some P4 setups so some day I will also open this kind of thread

Chuchnit

07-16-2009 09:30 PM

LOL, maximum old school pwnage!! Good luck brudder.

bluto

07-16-2009 11:13 PM

Always awesome to see old school benching. That's a sexy lookin pot you got there Supes, nice and tall .

Kal-EL

07-17-2009 12:04 AM

Its the old detroit a/c pot I had from a while back, it has the mounts for this socket so its still being put to good use :D

crustytheclown

07-17-2009 12:20 AM

Gool luck bro...Damn that's a tall pot!!!:D

Buckeye

07-17-2009 04:27 AM

HAHA Looks nice Kal !

Do you have a phase by any chance ?
Can't wait till you run a SuperPi 32M or wPrime 1024 :)

DrNip

07-17-2009 05:41 AM

Oh really...

Buckeye

07-17-2009 06:03 AM

Yes those two tests do take awhile on these chips :)
Thats why I asked if he had a phase.

I can see many medals being lost allready, of mine that is HAHA

Kal-EL

07-17-2009 07:24 AM

Nope, don't got a phase but I hear I'm gonna get one in a few months and it looks to be the mother of all Phazkerz.

I'm picking up a huge box of Dice today from my "Sponsor", lol, should count as phase, just gotta keep scooping or jack up the clocks to ludicrous speed.

Buckeye

07-17-2009 07:34 AM

Quote:

Originally Posted by Kal-EL (Post 10072)

just gotta keep scooping or jack up the clocks to ludicrous speed.

It is the Amazing P4 socket 478 benching setup cool2

HITandRUN

07-17-2009 04:56 PM

Yeah I love the P4 stuff! I have some benching coming up this weekend as a matter of fact. Which board are you using for this fun? I found the EP45T-UD3P a solid performer when benching the 775 P4's. Here is also a link to my LN2 benching thread at my home forum in case someone cares to check it out. :D

Kal-EL

07-17-2009 05:01 PM

Usin the Asus P4P800 Deluxe w/Dice. I'll care to check it out :D

Kal-EL

07-17-2009 06:11 PM

Can't get these stupid 3com drivers installed. Buckey Smoke Signal Activated!:flaminmad:

Buckeye

07-17-2009 07:00 PM

Just use the device manager. Select what has a "!" and say update drivers and point it to the CD.

There are some on the the CD that you will not need.

MaadDaawg

07-17-2009 07:08 PM

Hey Brudder, dat b a nice looking rack you got that board & pot sitting on top of :) Do you love it, or, do you love it ?? LOL

Looking forward to seeing what you get outta the P4, I got a couple laying around I might try on dice once I get through with the E8600 and the q2c ...

Kal-EL

07-17-2009 09:27 PM

Hey Daawg, stop checkin out my rig's rack, she's shy, LOL.

Buckeye, I pointed it to the cd but she's not having nutting to do with it. Grrrr, gotta go to work, will attempt slippery driver insertion tomorrow.

Buckeye

07-18-2009 04:24 AM

Can't remember... 3 Comm drivers are for sound or network ?

It's been awhile that I had that all up and running, trying to remember what those were for.

DrNip

07-18-2009 08:14 AM

Network.

Kal-EL

07-18-2009 08:19 AM

Yah, ethernet drivers not being found by the device install wizard. Anybody know what folder they need to be in, in the system files?

Chuchnit

07-18-2009 08:19 AM

Quote:

Originally Posted by DrNip (Post 10161)

Network.

Don't need those then..... GET TO WORK SUPES!!!!

DrNip

07-18-2009 08:20 AM

One word.

WIRELESS

Kal-EL

07-18-2009 08:22 AM

Quote:

Originally Posted by Chuchnit (Post 10164)

Don't need those then..... GET TO WORK SUPES!!!!

Oh FFS, I wanna update the damn os and shit nutterz, I'm gonna be going thru like 20 different pentium cpus' in this process, it'll take for ages to keep moving shiznit around.

Chuchnit

07-18-2009 08:44 AM

Quote:

Originally Posted by Kal-EL (Post 10167)

Oh FFS, I wanna update the damn os and shit nutterz, I'm gonna be going thru like 20 different pentium cpus' in this process, it'll take for ages to keep moving shiznit around.

That is what nlite is for. Integrate service packs and crap all in one swoop. Then cut it down within an inch of its life. Then take the whopping 10 minutes it'll take to reinstall each time. cool2

Honestly though, I'm lazy too and just started benching w/o internet. I can thank crio and his uber 01 scores for making me less lazy and actually nliting my OS. :clapping:

Kal-EL

07-18-2009 08:47 AM

Quote:

Originally Posted by Chuchnit (Post 10177)

Wheres my copy at? Better say "In the mail Supes" fight7

Chuchnit

07-18-2009 08:51 AM

Quote:

Originally Posted by Kal-EL (Post 10179)

Wheres my copy at? Better say "In the mail Supes" fight7

Ya just like your check too :rofl:rofl

You want a copy for real? I still need to find more things to cut out. Right now I'm at 190mb on my copy w/o internet. I wanna have it around 100mb flat in the end. I just gotta figure out what benches like what tweaks so I can have one for each bench ready to install.

Kal-EL

07-18-2009 08:52 AM

SO we're talking what? x-mas then? ohcrap

DrNip

07-18-2009 08:53 AM

PM me your address supes and I will have it out to you 1st thing Monday morning.

Kal-EL

07-18-2009 08:54 AM

Quote:

Originally Posted by DrNip (Post 10189)

PM me your address supes and I will have it out to you 1st thing Monday morning.

Das what I'm talkin bout, a lil appreciation for the man in tights, lemme add some Drnip Rep points :good:

Chuchnit

07-18-2009 08:58 AM

Quote:

Originally Posted by Kal-EL (Post 10192)

Das what I'm talkin bout, a lil appreciation for the man in tights, lemme add some Drnip Rep points :good:

I'll second the rep points. I already sent you one stripped version though. From doing some reading though. Different benches like different tweaks/services. I can send you a copy of what I used for 01 if you'd like??? I really wanna make one for super pi. to_keep_order

Kal-EL

07-18-2009 09:04 AM

O.k. wenches, send me ur best of breed bench os's and label them accordingly so I know which is which. I'll then host them on the site server for Hwbot Members and Premium Subscribers to download as they wish.

Chuchnit

07-18-2009 09:05 AM

I'll get them in the mail buddy ;)

Buckeye

07-18-2009 09:25 AM

If I used a D-Link Wireless adapter and used the driver for those then I didn't use the 3 Com drivers ?

HITandRUN

07-18-2009 09:50 AM

Quote:

Originally Posted by Kal-EL (Post 10196)

That's a great idea! This way everybody can brainstorm a copy and see what else needs to be cut out! :thumbsup:

Kal-EL

07-18-2009 02:57 PM

Using pll ICS952018AF right now but can't seem to get over 150x15 @1.95vCore on the Williamette 1.5ghz P4.

Its still early tho. :thumbsup:

wrong pll, use ICS952607EF

tanka12345

07-18-2009 04:03 PM

So awesome using the 478! I love the look of the 7800GS. Wish I had a good AGP card for my old rig cool2

Kal-EL

07-18-2009 04:05 PM

Asked in other thread, did u really need to sub-zero the nb on this s478?

Kal-EL

07-18-2009 04:29 PM

Guess that was a drive by spamathon................

Anywayz, heres where its at right now, gonna freeze the nb tomorrow after throwin everything in the drier.

http://valid.canardpc.com/show_oc.php?id=606383
http://valid.canardpc.com/cache/screenshot/606383.png

punx223

07-18-2009 04:35 PM

I got a damn good lightened OS if you need NOOB

Buckeye

07-18-2009 06:56 PM

3 Attachment(s)

Quote:

Originally Posted by Kal-EL (Post 10216)

Using pll ICS952018AF right now but can't seem to get over 150x15 @1.95vCore on the Williamette 1.5ghz P4.

Its still early tho. :thumbsup:

wrong pll, use ICS952607EF

Use the ASUS OC Utility thats on the disk. You can change vcore and FSB with that. I did not use SetFSB at all.

The PCMark05 screen is from a different chip but you can see the OC utility there.

All times are GMT -10. The time now is 02:22 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page