Amd 965be+790xt-ud4p+ss
 

Hi guys,
haven´t any AMD CPU for 5 years ago. Now I bought one and started to test.
Here are my first results with little cold (-40 +/-4c).

Components used:
AMD Phenom II X4 965BE C3
Gigabyte 790XT-UD4P
2x2GB Kingston HyperX KHX1600C8D3T1K2/4GX

Have tried the CPU-Z validation and SPI 1M test for first

CPU-Z - 5176,79MHz
http://valid.canardpc.com/show_oc.php?id=919998


SPI 1M - 13,797s(CPU-5037MHz, Mem-876MHz Cas8-9-8-24-40-2T)
http://img684.imageshack.us/img684/4345/137w.th.jpg

The results are not final, I see a little improvement - time to play :)

Tommorow I will test some 3D stable frequencies too. So stay tunned :blush:

Looking very good bro, can't wait to see what numbers you can pump out on 3d benches :toast:

5ghz+ Club :thumbsup:

Nice clocks there on SS Phase :thumbsup:

Thanks :)

some results wprime 32M, 3D mark 06 and 05

for 3D tests I used an MSI N260GTX Lightning VGA for now at default frequencies

wprime 32M - 4752MHz (7,828s)

http://img197.imageshack.us/img197/304/50202921.th.jpg

3D Mark 06 - 20633Marks(CPU skore 7166 points) (CPU-4725MHz)

http://img23.imageshack.us/img23/8693/061gn.th.jpg

3D Mark 05 - 28046Marks (CPU-4752MHz)

http://img63.imageshack.us/img63/6035/83572978.th.jpg

The frequency of CPU while 3D Mark 05 could be a little improved because of better CPU temps while the mark is running. For 3D Mark 06 and Wprime 32M it looks like its the max for the CPU at these temps vs. voltage.

Now working on 3D Mark 03 and SPi 32M

Really good runs bro. Are you going to be running 3DMark with some better GPU (s)?

Thanks,

for now only my best vga at home is this Lightning(will to OC a little), now i´m low on budget so better VGAs maybe in a mounth or so. :blush:

What are you looking to get?

a small update

OCed the VGA to 792core/1584shader/1050memory and a little CPU frequency improvement

3D Mark 03 - 63535Marks (CPU-4837MHz)

http://img204.imageshack.us/img204/426/031kuw.th.jpg

3D Mark 05 - 30276Marks (CPU-4837MHz)

http://img109.imageshack.us/img109/911/051og.th.jpg

the OCed vga with the same frequency of CPU maked 2K points more in 3D Mark 06, but haven´t the screenshot because it was corrupted - only the upper half of screenshot is seen

im thinking about a 2core VGA like 295GTX, 4870X2 or something like this

Nice improvements. :). You should try a 5970 if the funds allow.

Nice overclocks 0ro! :thumbsup:

Nice tweaking, phase cooling?

Thanks bro :) .

Thank you :), Yep its a single stage phase cooling

found the 3D Mark 06 screeny with CPU-4730 and VGA-792/1584/1050

22 489
http://img171.imageshack.us/img171/2752/062fy.th.jpg

tested SPI 32M on 1,6V and rerun SPi 1M with 1,6V on CPU

SPI 32M - 14m 32s 765ms (CPU - 4876.3MHz, NB - 2968MHz)

http://img34.imageshack.us/img34/4492/32mpi1.th.jpg

SPI 1M - 13s 735ms (CPU - 5075.8MHz, NB - 3024MHz)

http://img85.imageshack.us/img85/8343/83582190.th.jpg

now I am gona to play with the Intel platform a little under SS :D

improoved Wprime 32M and 1024M results

WPrime 32M - 7.578s (CPU - 4872MHz 1,696V, NB - 3248MHz, RAM - 812MHz CAS 8)

http://img651.imageshack.us/img651/3641/w10o.th.jpg

WPrime 1024M - 243.468s (CPU - 4823.8MHz 1,696V, NB - 3015MHz, RAM - 670MHz CAS8)

http://img59.imageshack.us/img59/9600/47889779.th.jpg

always on single stage :)

Nice show man

4 minute 1024 wprime time on AMD is very good :)