Overclockaholics Forums - Are You PiFast Enough Contest

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)

- OCA Contest Discussions (http://www.overclockaholics.com/forums/forumdisplay.php?f=93)

- - Are You PiFast Enough Contest (http://www.overclockaholics.com/forums/showthread.php?t=2920)

double that sagging shit ballz !!!

incredibleeeeeee

i miss my classy

Quote:

Originally Posted by Splave (Post 47119)

holy shitballz what kinda vdimm?

Lots !!

1.92 bios, 1.93 on the DMM.

Im sitting at 21.05 atm :) nice work goat. Will try for more than next day or 2

My scores were bouncing around from 21.03 to 21.06

I had a 21.01 at one point, but crashed saving the SS.

Went to i4 and read up eva's Dominator review thread and applied some of his subtimings.

I've gone through 3 different installs of Chucky's XP. Started with a fresh one today and applied all the tweaks I could find.

Well you took the wind out of my sails. Sick run man. Looks like I'll be beating my head going after that score.

started testing the limits of my ram :thumbsup: Noticed my uncore was getting too high so just wanted to see if it would run. 1.75vdimm so we have wiggle room

Broke 21s :)
Tweaks to try that cut some time.
-Hexus PIFastR
-Right click properties run maximized
-Lowest trfc possible -shaved .05s from 68-60

Quote:

Originally Posted by Hondacity (Post 46438)

the pot...installs take minutes on ssd's

Really? My installs seem to take forever on SSDs, but they are both MLC drives.

Benchzowner XP on SSD takes like 3 minutes for realz

Quote:

Originally Posted by Splave (Post 47186)

Benchzowner XP on SSD takes like 3 minutes for realz

Indeed :D

You got sub 21s ? awesome :D
Will you post it ?

That's what I have for now :)

http://i31.tinypic.com/30bi8fd.jpg

Quote:

Originally Posted by Splave (Post 47149)

Hey Splave, I noticed a couple issues in your screenshot.
CPU-Z is showing 6 GB or ram, but tweaker is only showing 2.
Also the RTL is showing 0, this indicates the cpu isn't recognizing all the ram. I had the same thing on my P6T. For me it was usually too little v-dimm.
Causes I know of are:
-Not enough v-dimm for the speed or timings
-Poor pin contact in the socket
-Bad IMC (God forbid)
-Moisture in the Dimm slots (I found this out today, it's really humid here)

The other thing is the refresh interval. I think this number should be lower. I believe it is determined by memory strap selection in the bios.
I'm not sure exactly what it's called. As soon as my board dries out, I'm gonna do some testing to find out how it is affected.

This is likely enough info for you to trounce my score quite handily.

I had a 20.98 run completed, only to notice my uncore was sitting at 4209. Bitch. :ohcrap: