Overclockaholics Forums
Page 8 of 23 « First 4567 8 910111218 Last »
Show 40 post(s) from this thread on one page

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)
-   -   ASUS Rampage Extreme III testing thread (http://www.overclockaholics.com/forums/showthread.php?t=2447)

GFDuke 05-15-2010 02:24 AM
I guess i didnt fuk it up. Checked the bios version and its the 0534. So all is well. I'm not as fed up today and things are going better.

Splave 05-15-2010 02:47 AM
duke, sorry I didnt get back to ya last night. My gf is done with her clinical internship and we where ummm partying. Will call ya this afternoon if thats good?

GFDuke 05-15-2010 02:49 AM
Sure man. I've got a 50th birhday party for my brother so i'll be gone at 5 till??? I'm installing Vista 32 right now.

Splave 05-15-2010 03:02 AM
actually maybe I will call you tomorrow, just got notice my board is here and ready to pick up at fedex. I will fiddle with it tonight so I can be more of a help, kinda relearn it a bit if thats cool :)

GFDuke 05-15-2010 03:07 AM
Yea man thats cool. I have a few more OS's i have to do anyway.

Jor-El 05-15-2010 05:54 AM
Asus Rampage III Extreme Bios Template
 
HITandRun could you ad to the first post:


Code:
Target CPU Frequency        4410MHz
Target DRAM Frequency        1683MHz

LN2 Mode:            Disabled***
QPI Loadline Calibration:    Enabled***

Sync Mode            [Enabled]
AI Overclock Tuner        [Manual]
OC From CPU level Up        [Auto]
CPU Ratio Setting        [21.0]
CPU Turbo Power Limit        [Disabled]

>CPU Configuration----------------------------
CPU Ratio Setting        [21.0]
C1E Support            [Enabled]
Hardware Prefetcher        [Enabled]
Adjacent Cache Line Prefetcher    [Enabled]
Intel(R) Virtualiyation Tech    [Enabled]
CPU TM Function            [Disabled]
Execute Disable Bit        [Enabled]
Intel(R) HT Technology        [Enabled]
Active Processor Cores        [All]
A20M                [Disabled]
Intel(R) SpeedStep(TM) Tech    [Enabled]
Intel(R) C-STATE Tech        [Enabled]
C State package limit setting    [Auto]
----------------------------------------------

BCLK Frequency            [210]
PCIE Frequency            [100]
DRAM Frequency            [1683]
UCLK Frequency            [3789]
QPI Link Data Rate        [7579]

Memory Configuration Protect    [Disabled]

>DRAM Timing Control--------------------------
CAS# Latency              6    [6]
RAS# to CAS# Delay          7    [7]
RAS# PRE Time              6    [6]
RAS# ACT Time            18    [18]
RAS# to RAS# Delay          4    [4]
REF Cycle Time            72    [72]
WRITE Recovery Time        12    [10]
READ to PRE Time          6    [6]
FOUR ACT WIN Time        24    [Auto]
Back-To-BackCAS# Delay          0    [Auto]

Timing Mode            1N    [1N]
Round Trip Latency on CHA    60    [60]
Round Trip Latency on CHB    62    [62]
Round Trip Latency on CHC    64    [64]

WRITE To READ Delay(DD)          8    [Auto]
WRITE To READ Delay(DR)          8    [Auto]
WRITE To READ Delay(SR)        18    [Auto]
READ To WRITE Delay(DD)          7    [Auto]
READ To WRITE Delay(DR)          7    [Auto]
READ To WRITE Delay(SR)          7    [Auto]
READ To READ Delay(DD)          7    [Auto]
READ To READ Delay(DR)          6    [Auto]
READ To READ Delay(SR)          4    [Auto]
WRITE To WRITE Delay(DD)      8    [Auto]
WRITE To WRITE Delay(DR)      8    [Auto]
WRITE To WRITE Delay(SR)    18    [Auto]
----------------------------------------------

CPU Differential Amplitude    [Auto]
CPU Clock Skew            [Auto]
IOH Clock Skew            [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode            [T-Balanced]
PWR Volt. Control        [Auto]
Load-Line Calibration        [Full]
CPU Voltege OCP            [Enabled]
CPU PWM Frequency        [1000kHz]

Extreme OV            [Disabled]
Extreme OC            [Auto]

CPU Voltage        1.415    [1.41250]
CPU PLL Voltage    1.812    [Auto]
QPI/DRAM Core Voltage    1.310    [1.31250]
DRAM Bus Voltage    1.654    [Auto]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA    [Auto]
DRAM CTRL REF Voltage on CHA    [Auto]
DRAM DATA REF Voltage on CHB    [Auto]
DRAM CTRL REF Voltage on CHB    [Auto]
DRAM DATA REF Voltage on CHC    [Auto]
DRAM CTRL REF Voltage on CHC    [Auto]
----------------------------------------------

IOH Voltage        1.244    [Auto]
IOH PCIE Voltage    1.508    [Auto]

ICH Voltage        1.111    [Auto]
ICH PCIE Voltage        [Auto]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum        [Disabled]
DRAM Spread Spectrum        [Disabled]

***on-board jumper dependant
* courtesy of donmarkoni @ i4memory.com

HITandRUN 05-15-2010 01:15 PM
Quote:
Originally Posted by Jor-El (Post 41097)
HITandRun could you ad to the first post:

Done sir! Firts post modified with the BIOS settings! :thumbsup:

Jor-El 05-15-2010 01:16 PM
Quote:
Originally Posted by HITandRUN (Post 41130)
Done sir! Firts post modified with the BIOS settings! :thumbsup:
Thank you my friend, now we can share BIOS settings! :thumbsup:

Splave 05-15-2010 05:16 PM
I Really like this board :)

http://valid.canardpc.com/show_oc.php?id=1189116
Water (not pushing past 1.45 on water)

Code:
Target CPU Frequency        4883MHz
Target DRAM Frequency        1576MHz

LN2 Mode:            Disabled***
QPI Loadline Calibration:    Enabled***

Sync Mode            [Enabled]
AI Overclock Tuner        [Manual]
OC From CPU level Up        [Auto]
CPU Ratio Setting        [31.0]
CPU Turbo Power Limit        [Disabled]

>CPU Configuration----------------------------
CPU Ratio Setting        [31.0]
C1E Support            [Disabled]
Hardware Prefetcher        [Enabled]
Adjacent Cache Line Prefetcher    [Enabled]
Intel(R) Virtualiyation Tech    [Disabled]
CPU TM Function            [Disabled]
Execute Disable Bit        [Disabled]
Intel(R) HT Technology        [Disabled]
Active Processor Cores        [All]
A20M                [Disabled]
Intel(R) SpeedStep(TM) Tech    [Disabled]
Intel(R) C-STATE Tech        [Disabled]
C State package limit setting    [Auto]
----------------------------------------------

BCLK Frequency            [158]
PCIE Frequency            [100]
DRAM Frequency            [1576]
UCLK Frequency            [3258]
QPI Link Data Rate        [4.8mt/s]

Memory Configuration Protect    [enabled]

>DRAM Timing Control--------------------------
CAS# Latency              6    [8]
RAS# to CAS# Delay          7    [8]
RAS# PRE Time              6    [8]
RAS# ACT Time            18    [24]
RAS# to RAS# Delay          4    [auto]
REF Cycle Time            72    [88]
WRITE Recovery Time        12    [auto]
READ to PRE Time          6    [auto]
FOUR ACT WIN Time        24    [Auto]
Back-To-BackCAS# Delay          0    [Auto]

Timing Mode            1N    [1N]
Round Trip Latency on CHA    60    [auto]
Round Trip Latency on CHB    62    [auto]
Round Trip Latency on CHC    64    [auto]

WRITE To READ Delay(DD)          8    [Auto]
WRITE To READ Delay(DR)          8    [Auto]
WRITE To READ Delay(SR)        18    [Auto]
READ To WRITE Delay(DD)          7    [Auto]
READ To WRITE Delay(DR)          7    [Auto]
READ To WRITE Delay(SR)          7    [Auto]
READ To READ Delay(DD)          7    [Auto]
READ To READ Delay(DR)          6    [Auto]
READ To READ Delay(SR)          4    [Auto]
WRITE To WRITE Delay(DD)      8    [Auto]
WRITE To WRITE Delay(DR)      8    [Auto]
WRITE To WRITE Delay(SR)    18    [Auto]
----------------------------------------------

CPU Differential Amplitude    [1000]
CPU Clock Skew            [Auto]
IOH Clock Skew            [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode            [T-Balanced]
PWR Volt. Control        [7v]
Load-Line Calibration        [50%]
CPU Voltege OCP            [Disabled]
CPU PWM Frequency        [800kHz]

Extreme OV            [Disabled]
Extreme OC            [Auto]

CPU Voltage        1.415    [1.442]
CPU PLL Voltage    1.812    [1.808]
QPI/DRAM Core Voltage    1.310    [1.400]
DRAM Bus Voltage    1.654    [1.683]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA    [Auto]
DRAM CTRL REF Voltage on CHA    [Auto]
DRAM DATA REF Voltage on CHB    [Auto]
DRAM CTRL REF Voltage on CHB    [Auto]
DRAM DATA REF Voltage on CHC    [Auto]
DRAM CTRL REF Voltage on CHC    [Auto]
----------------------------------------------

IOH Voltage        1.244    [1.202]
IOH PCIE Voltage    1.508    [auto]

ICH Voltage        1.111    [1.202]
ICH PCIE Voltage        [Auto]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum        [Disabled]
DRAM Spread Spectrum        [Disabled]

***on-board jumper dependant
Full LLC cause a bit of overvolt for me, 50% seems good. PWR volt control over 8v not necessary on water. Will try some higher bclk stuff and report back.

HITandRUN 05-15-2010 05:32 PM
Quote:
Originally Posted by Splave (Post 41152)
I Really like this board :)

http://valid.canardpc.com/show_oc.php?id=1189116
Water (not pushing past 1.45 on water)

Full LLC cause a bit of overvolt for me, 50% seems good. PWR volt control over 8v not necessary on water. Will try some higher bclk stuff and report back.
Nice Al! I'll be getting to it next week so all this stuff in this thread will be very helpful. :thumbsup: Got to RMA that dying Classy! :keeporder:


All times are GMT -10. The time now is 07:37 PM.
Page 8 of 23 « First 4567 8 910111218 Last »
Show 40 post(s) from this thread on one page


Copyright ©2009 Overclockaholics.com