Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)
-   -   ASUS Rampage Extreme III testing thread (http://www.overclockaholics.com/forums/showthread.php?t=2447)

Jor-El 05-05-2010 12:31 PM

Quote:

Originally Posted by Splave (Post 39459)
should boot same speed though regardless of core number if anything 2 cores should be easier. sounds like an issue.

The same EXACT thing happened to me with my Rampage Extreme and the E8600. All cores active great, 1 core active thousands of memtest errors just because I disabled a core...

Patch 05-05-2010 05:06 PM

I was unstable disabling cores on the 762. I haven't tried on the RIIIE yet.

I played with skews some on 762 and it never seemed to make much difference. Just the 100-300 range. Got no scaling so stopped trying. Haven't tried on R3E yet, but Bloodrage did much better with 200-300 on both CPU and IOH skew when high baseclocking with i7 920..

Hondacity 05-05-2010 06:44 PM

Quote:

Originally Posted by Jor-El (Post 39456)
In the REXiii same settings running 3d fine with 6 cores would give me BSOD on Windows load screen just because I used enable 2 cores only. Would like others with the board to check into that.


on the core i5 -670.....

at first i only used 2 cores....because using 1 core..would bsod....

i patiently tried lower blcks and lower voltages...and then cranking everything up inside windows....using evbot ofcourse :D

2nd -i5-670 6.8ghz single core.....validated

can do super pi @ 6.7ghz but very low efficiency as compared to my golden i5-670...

Patch 05-05-2010 08:40 PM

Was somebody asking for more pron in this thread?

http://img39.imageshack.us/img39/5338/frozenr3e.th.jpg

Jor-El 05-07-2010 04:20 PM

Nice one patch I have yet to Ln2 this board!

GFDuke 05-11-2010 12:30 AM

1 Attachment(s)
Did someone say pron? What are your thoughts on the NB fan that comes with it. Al could you pm me your phne#? I will most likely have questions that you could answer.

Jor-El 05-11-2010 05:20 AM

First Ln2 test last night: -100cbb 980x... You will need a torch for this mobo because when it's in cbb mode the volts won't warm up the chip like the Classified (p55).

That Asus Cold Boot Bug button that is next to the 8pin pwr connectors is useless, anyone tried it? It just restarts and gives you same cold boot 'cpu init hang'...

Splave 05-11-2010 05:25 AM

jor I used that button only when the reset button was unresponsive, IE instead of powering down completely

Patch 05-11-2010 05:27 AM

My experience has been the opposite, Jor.

My P55 Classy couldn't keep a chip colder than -120ish (tried 3 chips and re-did the CB mod X3).

R3E so far has gone down to -150 to -160 range on the same chip that my 762 bugged at -115. That "CBB" button isn't a life saver, but it has helped me. If I hit it fast enough it will sometimes boot in situations where I'd normally have to torch it.

Hondacity 05-11-2010 02:08 PM

latest bios from SF3D

http://sf3d.pp.fi/RampageIII-Extreme-ASUS-0534.rar


All times are GMT -10. The time now is 07:37 PM.


Copyright ©2009 Overclockaholics.com