What VCCIO and VCCSA are you running?

This RAM I have is not very OC friendly LOL Or its SB platform :S

I have my SA at 1.15 and IO at 1.275 to get 2133-2200+ stable. But I am also running up to 104 BCLK

winFLP
No Waza

You need to try the TaiServer OS.

He needs to use wazza...

I shaved 20 seconds off my time just by switching OS as well as ran it with looser timings in the TaiServer. Will be using it again when I get my 2600k up and running.

Attachment 4374 Attachment 4375

hey OCM you have display drivers installed? If not you should :)

thats actually a pretty nice run for no wazza and your slow ass ram speed. :D No offense, seems to be a gigabyte issue atm. have you tryed f7d?

add some nice subtimings, wazza and you should hit 6:19 6:20 or so

Looks pretty good to me too.

Link?
I couldn't get waza done before crash. @ 7-7-7-21 was only stable for less than 10 min. Tried over and over again to get a waza run in to no avail. After screwing around for hours and being to stubborn not to change my timings I called it a night.
Using old set of Nvidia drivers.
Thanks and none taken. I'm still on F6c. I'll try the latest bios today
Thanks. Still workin it ;)

Quicky temp test with A/C set to 64c (Air coming out is 7c :)). Vcore 1.54v set in bios.

Nice temps OCM, your tearing that thing up

great work bro

air temps?

7c coming out of the a/c

Its 26c/80f outside today, nice and sunny :D

-7F here :D

benching in garage ftw!

Nice freaking setup. Has got to be the cleanest room every too!

I cleaned it up before I took the picture but thanks ;)

Latest spi32m run, shaved another 3 seconds.

Nice going there OCM, Can you post your settings?, got a Gigabyte setup, dont wanna waste days trying the settings. Already got to 4.8Ghz within the first 10 minutes of booting the setup. Had to leave for office after that. Ocing is like childs play on the SB. So do I need the settings?? Guess will like to savor the labour, :P

TaiServer, TaiServer!

What board and chip did you get?
Tai Server has been downloaded and burnt to a disk. I'll install today or tomorrow and have another go at it. :good:

The binning begins. 2600k sold, another on the way from the egg. Hoping for the best.

i hope our chips do 5.9ghz

lol

6+ghz :taunt:

I'd be more than happy with 5.7 Gigawatts, lmao.

Good luck in the lottery OCM .............. :keeporder:

2600k #2
Batch L041C106
# 0815

http://i464.photobucket.com/albums/r...HEMI/2600k.png

Well, thats about all I've been able to do with this chip so far.

Still working it though. Having issues booting at x54.

Its a different chip or the same one as before OCM??? How did you boot above 100bclk if its with the same chip??? Sadly I exchanged my chip which was able to boot at x53 multi and the present one cannot boot at x53 even at 99.5 bclk, lol

Its a different chip, got it today. Updated post.

Aah okies, then I will say, congrats on having a bit better luck than before, :D. Hopefully we all get a 5.7G chip soon, :laughing:

Yes :)

Nice, 53 is an improvment ........ :thumbsup:

Great one OCM. Give it more vcore then try 54, lol!

c stepping is rare :D nice that it is an improvement now RMA the other one ;)

C stepping here for sell.

http://www.xtremesystems.org/forums/...d.php?t=265970

Its his 2nd chip that he is selling, I am sure its not upto his standard hence, it certainly wont be OCA standard in that case I am assuming.

Never EVER buy a used clocking chip unless it is a team mate :)

Shrink wrap = saran wrap and a heat gun :P

Ask him: http://www.overclockaholics.com/forums/member.php?u=573

Fed #2 upto 1.65 vcore and tested x54, x55,x56, and x57. Looks like she's capped at x53. This chip does need less vcore to run stable than #1 chip. With 1.52v she is rock solid @ 5.3GHz, the last chip needed 1.55v for 5.2GHz.

Sold #1 to afford #2. Kinda risky but it worked out. Gonna 3D bench this one for a little while before going for #3.

So what happens when you try 54 multi? What I mean is how far along the boot process does it get? To the bios screen, windows log on or does it not even post?

It reverts to 3.4ghz. Same thing my last chip did @ x53 without lowring bclk.

Finally got a desk :D