Overclockaholics Forums
Page 5 of 23 1234 5 678915 Last »
Show 40 post(s) from this thread on one page

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)
-   -   ASUS Rampage Extreme III testing thread (http://www.overclockaholics.com/forums/showthread.php?t=2447)

Hondacity 05-02-2010 07:41 AM
weird usually the rctweakit launches fine with me... reinstall?

Jor-El 05-02-2010 07:43 AM
Run as Admin did the trick!


This is awesome I need to buy a netbook just for these little gadgets!

FACE 05-03-2010 04:37 AM
Quote:
Originally Posted by Splave (Post 38533)
- CPU Differential Amplitude

Jack it all the way up

"Increasing the CPU differential amplitude increases the noise immunity of the processor's reference clocks and indirectly increases the overclockability of the processor. Thus, if you face problems overclocking the processor, try increasing the CPU differential amplitude."
So is this the same as the "CPU Clock Skew" on the classy?

Chuchnit 05-03-2010 04:42 AM
Quote:
Originally Posted by FACE411 (Post 38743)
So is this the same as the "CPU Clock Skew" on the classy?
Nope, clock skew is just what it says. You add a delay with the skew. I haven't tried it on the classy, but it worked wonders clocking the Rampage Extreme. Goddamnit I miss that board.

Jor-El 05-03-2010 05:27 AM
Skews made a big difference when I benched E8600+RE.

On the REiii I left all in Auto but we need to fine tune these settings for the 980GT.

Jor-El 05-05-2010 10:50 AM
Anyone else noticed that disabling the 980x cores on BIOS (Active cores: 2) makes the system unstable?

Saw other results on the Classi and this function works fine there.

Splave 05-05-2010 10:56 AM
when I disabled cores I got different cold bug temps, IE there was a cold bug when I disabled cores.

shouldnt be more unstable though

Jor-El 05-05-2010 11:04 AM
Quote:
Originally Posted by Splave (Post 39450)
when I disabled cores I got different cold bug temps, IE there was a cold bug when I disabled cores.

shouldnt be more unstable though
In the REXiii same settings running 3d fine with 6 cores would give me BSOD on Windows load screen just because I used enable 2 cores only. Would like others with the board to check into that.

Hondacity 05-05-2010 11:13 AM
during load...on xp..it requires stability...what is your vcore? drop bclk?

Splave 05-05-2010 11:17 AM
should boot same speed though regardless of core number if anything 2 cores should be easier. sounds like an issue.


All times are GMT -10. The time now is 01:46 PM.
Page 5 of 23 1234 5 678915 Last »
Show 40 post(s) from this thread on one page


Copyright ©2009 Overclockaholics.com