It has to be right cuz if I have a higher oc at 1.8 it reboots right away @ 5.5

So something isn't right :P

hope it is not you chip.......... :ohcrap:

damn DOM!
I've had 100+ on my 3570k once

I wouldn't trust Real Temp or any other software when benching LN2. What are your temp probe readings? How cold were you?

yeah i wouldnt but i just used it cuz it wouldnt take any load past 1.65v at a higher oc

and i was full pot

as you can see in the pics the contact was good and i used 2 tubes of paste older one and new one that i just opened

and still crapola

So is my cpu fucked ? Rma time ? :(

^your going to have to kill it to rma it :P that sucks man..

Took 2nd WR for 4-card vantage, cpu is tapped out so cant catch andre
http://hwbot.org/submission/2326770_...70_80413_marks

Took 1st 3-card vantage :)
http://hwbot.org/submission/2326768_...70_78256_marks

Sick results bro,

3 and 4 cards .......... :) Sounds like you were busy keeping after the pots

word :thumbsup:

as soon as I we settle on a house, going to have a north east weekend and bring the ln2 truck over. bring your own gpu's and welcome to use whatever I have on the cpu/mobo end :)

alread got the okay from the boss, maybe we can get some sponsored gear if enough of you guys are interested

I'm there and will bring a truck load of GPU's and some steaks

Still in the Buffalo area ?

yes sir! :)

grtz on the WC Al!


:shock:

Nice runs Allen

I haven't got back one good cpu from rma :(

And I cant bin.... FML :P

ivy is a frustrating cunt isnt she.....im sick of her for sure

you should dump Ivy and go back to Sandy or Sandy's extra fat twin sister :D

been looking at P4C800-E Deluxe lately, soo expensive! sweet jesus!

here's the first time out for this chip , see how low I can go 4c/8t

Whats a good voltage for 5Ghz that would be an indication of the quality of this chip?

running one now at 1.265 v still holding on at 12 loops ........ :laughing:

just passed at 1.265 v going for less

just passed at 1.256

that is as low as it will go 1.25 = fail :shock:

run vantage or 3d11 :P


but im not sure if it needs to be tested on air/water to know if its any good

but mine would run IBT at 1.25v 5GHz

wow not bad!
I just sold my P5Q Deluxe, Q8200, GA-Z77-UD5H, not trying to pick up a UP7 or MVE now.
Not sure which one I'd rather have :( hate decision making!

hopefully i can get this job i just applied, even if i just work like 30hrs a week i'd be pulling in enough cash to pay for most of my toys and living expenses.

haven't kept most of y'all posted, but i've been living on people's couches since end of July lol.
only gets to go home on the weekends x.x

oh! forgot to tell y'all mom came home with one of this about 2 weeks ago XD
http://www.sigmaaldrich.com/catalog/...g=en&region=US

SWEET.................

may wamt to take a look at the AsRock OC or the Gene

i've been looking at the OCF as well, seems like everyone is enjoying it's memory clock very much.

this is going to be my 100% bench setup, since i am getting out of school next Wed the 21st not going back till the 25th i better act quick or i'd be clocking x58 on LN2 again XD

rip it up Tu .......... :thumbsup:

here is the Vantage and 11

needed 1.272 for Vantage to pass and 1.296 for 11 to pass
\
maybe not so good ............ :ohcrap:

this BOIS blows, won't let me go over 1.5 v , even know I have it over ridden in the BIOS ??? anyone know a good one for the Gene

have you tried for more then 5GHz ?

i would still juice it anyways :D

even my bad ones did 6GHz

BIOS won't let me go over 1.5 v even know I have it overriden :blink:

know a decent BIOS for this board ?

Check on Kingpin Cooling forums for bios versions. I;m pretty sure Shammy has them up over there.

thanks for the tip, I will check it out :thumbsup:

im on 1204

that seems to be the general consensus ay KPC as well

it is a long thread , board seems to have a lot of issues ........ :laughing:

if this BIOS does not help it is going out to the range , the AK will make a hell of a mess out of it ......... :ohcrap:

rip it up everyone!

felt like a damn loser still searching for the "best" bios for the X58A-OC :shitfan:

X58 is a lot of fun

Yes sir! can't wait till thanksgiving break :)

enable over voltage in bios bro

that chip is sick witch wtf is the batch? guys get all giggly when 32m can pass at 1.27v and your passing vantage cpu test! that is a golden chip bro. now stop using it for vantage and 11 haha :thumbsup:

Wow way cool, I will get you the batch when I get home tonight

Passed 32M at 1.256 but did not get a scren shot and when I tried to reproduce it took 1.261

I have overvolt enabled in the BIOS, that is what is effed up, I also have all the monitoring stuff to ignore but still get CPU fan boot error, just plugged a POS fan into ti to solve that , but working on 5.5 setting last night could not get it to boot as overvolt error pops up on boot up ......... I think this BIOS if effed, Ran out of time last night but going grab 1204 tonight and see if enable overvolt works on that one

You know of any that are better than 1204 .... any Shammy magic BIOS's afoot :laughing:

what board is it bro?

gene

go get some ln2 already :P

ivy needs the juice :D

working on it bro, but got to be ready at $ 2.25 a liter I can't afford to burn it up dicking around.

to put it into prespective, it would cost you $ 112.50 to fill your 50 liter :ohcrap: