|
WOW
Vantage and 3d06 scores almost the same :O Freaking sweet. Are those benches all on stock GPUs???? INSANE!!!! |
Very nice dude.
|
Thx guys, lets see if I can get 23 boints tonight to nudge out those hardware junkies at classicplatforms for a lil bit. :D
|
:clapping: GOOD LUCK!!!!!
|
GL mate!!!
|
I have been sitting back waiting for this. Very nice set up Kal. Can't wait to see what frozen GPU's will do.
|
Thx Jeff, I'm pushin bro! 35160 in Vantage :D
But dammit, I'm gettin to HATE cold bugs! :thumbdown: |
Anybody have cbb(s) move around in temp? +/- 20c?
|
http://www.overclockaholics.com/Kal/..._x64_ELEET.JPG
http://www.overclockaholics.com/Kal/...AST/16_31s.JPG Due to piss ant cold bugs and cold boot bugs at random temps, the game has been called temporarily, else the entire bancheto gets hip tossed out the office window. All the waiting for temps to drop to boot left unecessary condensation on the playing field. The funniest observation I've made thusfar is using Ln2 at DICE temps has provided the best clocks to date on this setup. Yet, soon as I punch into the -100c land, things get squirly, voltages fluctuate all over the place and its generally a shitty go of it. My plans right now are to pick up some DICE for the CPU, insulate the cards and dump shitloads of LN2 into them and see where that lands me on the ladder. I did pick up some boints for the team and will continue working on my game. NOOB4LIFE :D |
soups your cold bugs may move around some as your clock changes.
get used to a controlled pour to maintain a somewhat steady temp and you will be golden :morpheus: |
classified has weird cbb issues around -40 to -60/70. Going lower than -70 should resolve them though. You have the jumper set for cold clocks, and mode 2 set inbios right? (assuming 762 has those options like 759/760).
It may also be an IMC coldbug on your cpu. try raising VTT voltages and see if that helps. :thumbsup: |
The E762 is absent of the cooling mode in the bios and only has the x-jumper. On this particular board, especially last night, I've seen cb(s) and cbb(s) at exactly -42c and -73c, but not consistently. It will consistently bug at -110c on this board vs -120c on the E759.
The only variable change between motherboards is I'm running a heftier vtt on the E762 vs E759. The wierd thing is that arnt these cold bugs supposed to be cpu dependant rather than motherboard? |
If it wont boot at a certain temp that is the board yes. Classi will have "boot holes" throughout the negative temp ranges. For instance mine will cbb from -20 to -62 lower than that is fine until you get to -91 and lower it cbb's. So I have the window of -62 to -92 I have to boot into, after that in windows Ive taken it as low as -140
|
Yep, its wierd man, cuz it's bugged in windows at these sporatic temps, followed by a boot bug. It's just been too damned squirly and quite frankly it pissed me off. Haven't quit yet tho, just needed a breather before I went grape ape on the board.
I'm in my happy place now :D (bout to strap some 5870's to the board) |
LOL grape ape. You are old :)
|
Meh, McGilla Gorrilla is old, lol. :laughing:
|
Quote:
|
I found the same thing with my 975 damn thing cold boots below -40 if I change a setting that requires a cold start. Small changes and it is not affected. I know it is a big temp range but between -60 and -90 is ok outside that and outcome is not predictable on my 975. I generally try and maintain -90 during a 3d run. I have never tried pouring multiple pots just the cpu. I know during a vantage or 06 run I am using a thermos plus with controlled pours to maintain temps. The sucky part is a pour at the end of one of the tests while temps are hovering at the cold bug range can blow the run to shit break out the heat gun or torch. Pouring LN2 during 3d runs is an art form as far as I am concerned. A heat gun or small torch will help bring the temps into range without much defrosting or moisture. I keep a high wattage heatgun plugged in and can generally get back into booting temp range in 20 to 30 seconds at the most. If I find I am really unstable I will let the temps come down to -30 before trying to change settings and rebooting.
Now once the urge to hip throw the board subsides kick that thing in all four of it's GPU nuts and break 36K |
Quote:
|
When I say I'm busy, I MEAN IT!
Leave me along, I'm really busy atm :taunt:
Tryin to get all this insulation crap done :Dizzy: in a timely fashion. http://www.overclockaholics.com/Kal/...LN2/Erased.JPG |
looking good Kal!! I want to see some bot damage now!! :thumbsup:
|
Workin on it, but its gonna take alot of ln2 to master Bloomfield, a cascade would make it a breeze.
Had alot of fun chasing Chispy's score with the gpu's on air tonight. Came away with a meager 26627 3d06 single card gtx285. http://hwbot.org/result.do?resultId=911972 Video Fun:\ Edit: hehe, well I'm tapped out of LN2 :D |
tighten that ram up buddy!! some points to be gained there :thumbsup:
|
Wish I could get either my 965 or 975 3d stable at those clock I know the 4870x2's have more in em. Keep pushin them clocks it's lookin good.
|
Nice O5
1 Attachment(s)
Nice 05's finally comin in. AFter 3 hours of frustration :)
Attachment 1266 |
Nice. I see your chasing the #1 spot. You tried running Vista 32 to see what ya get?
|
No, my vista partition corrupted :P
|
Way to go brudder. You are in second spot in that category right behind K|ngp|n himself.
:dance::kneelsuckers: |
I blew thru a shit-ton of LN2 for about 3 hours, something was mis-firing today. Same clocks as yesterday were just a tinsy bit slow, wierd instability, bla bla bla bullshit.
Insticts tell me I've been pushing the board to frequently, it needs a week off, which is good cuz I'm out of LN2 and will have to get more before next weekend ;) Also, maybe someone can comment, you guys remember the low voltages I was running at early on? 1.500 for 5.2ghz runs. Those seem to be gone with the wind, its a voltge whore now :D or maybe I'm the Voltage whore? whatever, it was fun and if the 5870 or 5970 was on teh bench, woa nelly, spankage in the boints. But, thats next weekend (or Wednesday, I could stop by the DICE dude's place for a binge run on multi-card ) |
You are blowing it off on bot kal, go man go, so many benchmarks still left........
|
Quote:
|
1 Attachment(s)
|
Killed it man. Nice clocks.
|
not a bad session after all, I think I'll be ready for some 3d05 action at 5.4ghz in a couple hours.
|
Not bad man, nice clocking :)
|
4.4 dam nice.
|
Very nice! :good:
|
I just missed Gomerlerz time, ughhh 4.05
|
I need a new board :blink: Maybe I should say a real board... 220blck limit sucks...
|
Quote:
|
| All times are GMT -10. The time now is 02:20 AM. |
Copyright ©2009 Overclockaholics.com