I forgot to go buy ceramique.....all I have is shin-etsu and plain silicone compound. I used the shin-etsu like you said.

I don't like the torch already. How do you keep from burning shit? The retainer for the pot is plastic. My heatgun gets up to 1200 degrees and it's more controllable I think.

plastic? which pot do you have?

only recourse is heat gun then..

F1ee:blink:

Ugh, just be aware of where you point the torch?

Ok well I'm about to go fill the 2 thermoses....brb.....then I'm going to start the computer up again and start pouring, carefully keeping track of the temperature it CB and the temp it takes to CBB.....right? Then I have to maintain the temp as close to the CB as possible.

Does a lot of voltage always help or sometimes makes it worse?

Hold the temp and overclock like you normally would in increments.

The delivery guy said he thought that thing pumped like a keg or beerball......I think it's just a valve with a hose, so I'm going to have to remove the top and pour. That should be fun. ;)

Now I got a little bit of a cloud out of the nozzle, but still zero pressure and no liquid. You think it will build pressure by morning sitting in the house where it's at least 60F.

I'd like to play tonight, but pouring into a thermos even with a funnel will be quite a challenge by myself. I could probably rig up a filling station somehow.

Huh? you have an extraction device and are waiting for pressure build up?

Yeah, the tank has zero pressure probably because there is no air inside so I've been told. Plus it was sitting outside in the garage where the temp is ~20F for a few hours.

No idea, I'm a pouring bloak w/out extraction experience. Not sure if the device is removable or not. HOWEVER! I do know that if you attempt to pour it out thru a small hole, it will expand and shoot like a jet all over the place as it comes out the hole :)

The hole is 4-5" in diameter. The tank has carrying handles.....I would need a good funnel is all......I think. I could try siphoning it....NOT.

Sure sure, if you're gonna pour out the big hole, you're green for launch :D
No need for a funnel, just pour straight into the green stanley.

You promise I won't spill? ;) I think I may give it a shot.

First time out you never spill because you're so nervous that you are extra extra carefull. Trip #4 adn #5 your pouring ln2 all over the floor like a pro ;)

What happened to me with a funnel was the LN2 swirled around and just flew off the top of it. If you're gonna pour and not wait for the pressure to build. I'd just pour straight into the stanly also.

They brought an empty Dewar to his house and filled it there. The guy filled it to the top for him, which was nice , but thres no room for xpansion of the gas so theres no room to build pressure. Either that or its frozen at the neck. But probably not. Put the heat gun or the torch on it, it will build pressure. Either that or wait until the morning. If you manage to pour some off and then put the fillr back on, by the morning it will have pressure i bet.

Pouring it is not an easy task................

Pouring from a 30L is def not easy. When i pour from my 35 i put it up on a chair. And i spill alot of it. lool

i do the same:thumbsup:

i use the 25$ chair from staples...with wheels and it spins around easy.

i shoulda took pics of how i do it.hehehe

Brilliant Honda! Check it out.:ohcrap: Easy as could be now.

Well that chip was a waste. Couldn't OC it 1mhz further with LN2 and the pot at -70.....I'm changing chips. I'm angry.

maybe maxing out something? ram? nb?

Naww...chip just won't go any higher than 3246...but i decided to run some benches and it's doing much better than it ever did. :) So I'm happy again. I'll keep you updated.

WPrime is running at a much higher frequency....I'm loving that. I can get some decent points out of this cpu. I'm just going to keep benching till it's gone. I'm only running it ~-50C.

niceeee have fun bro

:D Can I say WHOOOOOOHOOOOOOOO!!!!!!!and YEEEEEEHAAAAAAAAAAAAAA!!!!!

oh lord...another addiction ...lol

YEEEEEAAAAAHHHHH!!!!! #2 Wprime32 :taunt:

EDIT: now I need to eat something, and switch to the brand new Opty152 for the rest.

please go number1 :D

is it doable?

It's like a 5 second jump and like another 400MHz to get #1.......I'm moving on for now.

yep fight the wars you can abuse :D

:thumbsup: :clapping:

Another guy bitten.

yeppers ;)

Ok on to chip #3. The FX-55 Clawhammer. Thanks again Jerry.

Merry X-mas we have a new FrostFreeeeek :D

..................still going, got about a gallon or 2 left. LN2 lasts longer I guess if you aren't going for super low temps. I'm only running -40 to -50 average. Lowest I saw was when I had a probe inside the pot and that was like -113 I think. I got the base down to ~-70 or so. I should drop a probe in the bottom of the tank and see what it says. Should be ~-190 right?

yep

I got a few points out of teh FX55..........and on to the Opty170, but just for max OC because it only runs single channel memory, and I may even get to do the FX-53 too.

.............still have agallon or more left, I'm going to bed I can't even see straight. hopefully it lasts 6 hours or so.

Good night, and I really appreciate all the advice and coaching. :thumbsup: It was a good time for sure and I think I got at least 15 points. Maybe grab a couple in the morning:keeporder:.

over and out.

Roger! :) Good Show :D

939 pornshow! lol