At the same bclk?

I did it before on a gig ud5p67 at 100x56

On this asus gene-z I had to use 103.7x54 to finally to get 5.6 took hrs

But now I need more vcore but its on the ss was around -50's the whole time was tempted to use 1.8v+ to get x57-59 to boot but didn't :P

Havin a couple issues. ROG connect wont register bclock or the multi when i change it from the repote pc. It registers voltage increase I can see the vcore go up in cpu z but no bclock or multy.

Then when iI set vcore in bios it dont stick, once Im in windows an open cpuz 1.18 vcore when it should be 1.40. Guess I missed a disable an enable some where

Yea. Everyone will tell you. Don't waste your time with ROG on these. Do everything in the bios. My ROG dosn't work right either.

Dom...1.8 will kill your chip bro. Don't do it.

Everything started work by itself lol Then had a short spell of no usb's, then that went away.
i did have better results than this but didnt save anything
http://i39.photobucket.com/albums/e1...2-11/sp32a.png

Use Tiny XP. 2 cores/2 threads, no hyperthreading for pi 32 bro. You'll get a better overclock too. ;)

x2 555 BE and 145 semperon are here. Load OS and going to try 145 first

Thanks Duke Ill remember that. For the most part i was just tinkering around learning the platform. I was running 5.5Ghz on the same voltage an ran all the 2d tests with no problems then she got temperamental an I said goodnight to her. I should be getting some Ln2 in the next few days.

Splave gonna rape the AMD 2d woot woot

Are they un-lockers?