well this is all i could get :flaminmad:
http://valid.canardpc.com/show_oc.php?id=1492085

i fought the mb for like 2-3hrs and found out it was the vr pins where toughing :wtfsign:

MB had no cb or cbb even in dual channel

booted at 260fab @-180c ihs temp max vcore was 1.944 or it would reboot

we tried 2 352s.....max fsb on both is 299mhz....so you're prolly maxing something out

Nice 7!

Try lowering voltage before going higher. My 7.9 chip would take 2+v, but clocked worse with anything over 1.84-1.85v.