Overclockaholics Forums - Gigabyte GA-P67A-UD5 + i7 2600K

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)

- Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)

- - Gigabyte GA-P67A-UD5 + i7 2600K (http://www.overclockaholics.com/forums/showthread.php?t=3912)

Quote:

Originally Posted by OC Maximus (Post 68537)

hehe

Unfortunately not stable enough to run spi32m.

Tried vdimm 1.66v-1.8v. Fan on the Rams. Actually haven't been able to run 2133+ in spi32m at all.

What VCCIO and VCCSA are you running?

This RAM I have is not very OC friendly LOL Or its SB platform :S

I have my SA at 1.15 and IO at 1.275 to get 2133-2200+ stable. But I am also running up to 104 BCLK

You need to try the TaiServer OS.

He needs to use wazza...

I shaved 20 seconds off my time just by switching OS as well as ran it with looser timings in the TaiServer. Will be using it again when I get my 2600k up and running.

Attachment 4374 Attachment 4375

hey OCM you have display drivers installed? If not you should :)

thats actually a pretty nice run for no wazza and your slow ass ram speed. :D No offense, seems to be a gigabyte issue atm. have you tryed f7d?

add some nice subtimings, wazza and you should hit 6:19 6:20 or so

Looks pretty good to me too.

Quote:

Originally Posted by DrNip (Post 68627)

You need to try the TaiServer OS.

Link?

Quote:

Originally Posted by rickss69 (Post 68628)

He needs to use wazza...

I couldn't get waza done before crash. @ 7-7-7-21 was only stable for less than 10 min. Tried over and over again to get a waza run in to no avail. After screwing around for hours and being to stubborn not to change my timings I called it a night.

Quote:

Originally Posted by Splave (Post 68636)

hey OCM you have display drivers installed? If not you should :)

Using old set of Nvidia drivers.

Quote:

Originally Posted by Splave (Post 68637)

thats actually a pretty nice run for no wazza and your slow ass ram speed. :D No offense, seems to be a gigabyte issue atm. have you tryed f7d?
add some nice subtimings, wazza and you should hit 6:19 6:20 or so

Thanks and none taken. I'm still on F6c. I'll try the latest bios today

Quote:

Originally Posted by DrNip (Post 68638)

Looks pretty good to me too.

Thanks. Still workin it ;)

Quicky temp test with A/C set to 64c (Air coming out is 7c :)). Vcore 1.54v set in bios.