6.5 is an un-doable multi, would be interesting to see if it works :)

My understanding (unless some one can show me a screen shot with 6.5 on an E8400/E8600) the cpu doesn't have it.
7.5, 8.5, 9.5 (if the cpu goes that high) are the only half ones it has.

Sucks to, as my RE will 3D 650fsb and screen 680+

Yep i tried 7.5, 8.5, 9.5 but never 6.5 because i didnt needed to... Ill try it on E7300 and E8600...

I have never been able to get the 6.5 multi to work on my e7300 and biostar
Will probs try to do 600 x 7 methinks. :D
Expect some results over the next day or two.

Damn... i guess ill have to switch to LN2 and do the plan B: 700 x 6 :D:D:D

Getting the big guns out for max pwnage. cool2

This bad boy is all prepped up and ready for LN2. Just prepping the 280 is next. Gonna shoot for a 1000Mhz core over clock... HAHA if I am lucky ohcrap

Get ready you slackers out there and start posting some Killer Scores :scared:

Disclaimer: No GPU's were harmed in this over clocking <yet that is>
This GPU will be frozen solid very soon :shock:

Planning to use the subzero 280 with Nehalem or C2D?

Best choice might be the less obvious one ;)

Same setup that I used for my other score... QX9650, OCZ Flex, EVGA 790i <i hate this board LOL>
Still gonna get creamed tho, newer cards beat me up :(
But not going down without a fight !

good luck BUCK EYE!

Dude that is gonna own!!!!

is that card vmodded up buckeye?

It can use the EVGA vmod tool so no need for a hardware mod.

Im excited for you buck :D

1000 should be easy

Come on mate, you must be able to hit 1400 N


If not ohcrap

well i have new score up there!

no lol, on air 1400 is JUST JUST out of reach, but i think i could muster 1395 with pci-freq even higher.

but yea, il make 1400 dont worry's!

in meantime, upload you backup!

I wouldn't be so sure Buckeye, a subzero 280 did take first in single card on XS and IIRC it was only running ~950 MHz.

Killer runs Vivi :thumbsup: G92 lives on

Good to hear.



And to the powers that be.

Is the dead line midnight 12 July CST ?
Just trying to work out what time zone you use.

think itl' be midnight 11 july and as it hits 12 its over

Good Job Chuchnit !

About time you guys stopped sand bagging it LOL :)

just kidding :)

hahaha

I busted my balls for over 6 hours today for that one. I honestly think with nothing more than a couple other tweaks I could start knocking on 89k, but why when I have a better setup in a box? I had atleast 4 runs 200-400 points higher before running nature. Then came nature. I kept crashing. I was so damn frustrated. Finally I really relaxed the vga clocks for nature, but this run wasn't as good in the other subtest. Oh well, I still made my goal of 88k on i7.

Oh yeah, that's all I got right now, honest.

nice man
good score

highest i could get without going subzero last time round was 88,8K with ATI HD 4890 single :thumbsup:

http://img2.imageshack.us/img2/796/8...th3d01calc.jpg

btw man you are killing it

if you can get nature up to 1199 you are looking at 90230 score dude :thumbsup:

I am so bad at this but I'll look on the bright side, my GPU seems to overclock decently for no mods and stock cooling.:rofl

Setting maxmem to 600 added about 800 points.

http://i306.photobucket.com/albums/n...1/th_81020.jpg

Getting the screenshot all right takes a lot of practice as I'm beginning to find out. I had the date set wrong and forgot to save a project file to upload.

also I guess your frequency is more than 4200 Mhz, remember the rules say not even .001 Mhz above 4200...

as far as i know 6.5 is not possible according to intel specifications, so with no mabo you can have 6.5 :thumbdown:

Thanks alot Dinos!! It means alot getting a compliment from you! Nature shouldn't be an issue with s775, or I hope not. Nature kept kicking my ass though. That run had really low LL, DL and just average CH, LH. I had a 66435 before running nature going and Nature crashed :argh:

Nice work Chuckos but don't stop there bro, push it till it hurts or the wife prints out the e-divorce papers :D

Ready to bring the RAIN

http://img190.imageshack.us/img190/8428/84231486.jpg

http://img196.imageshack.us/img196/9493/57403753.jpg

http://img188.imageshack.us/img188/2422/31469459.jpg

http://img188.imageshack.us/img188/7916/47554126.jpg

http://img196.imageshack.us/img196/575/19802459.jpg

:rofl Well I'm about 3/4 the way there. Plus I gotta foster the fever and go to Joe's how to show him how to bench tomorrow.


@ Vivi - Hurry and strap them bitches on and bench.

Damn so im sucked right now as the rams i ordered are the new revision of Kingston hyper X and they dont have the micron chips :(

keep faster, after you bench i will decide single or multi gpu category :good:

Nice work Vivi. Rogue210 came over today to engage in some noob getto gpu insulation :D
I'll post the pics when I get off in 7 hours cool2

Kal, most important,

INsulate your PCI-E slot area VERY well. it's almost always the cause of dead gpu's

viv bro that looks like the shit mate

Jazzed up with vasoline/condensation repellant! :D

thx >_<

really excited.

Gogo Kal-el :D

Sweet !!

Gonna have some nice LN2 action :good::thumbsup:

damn john... craziness!!! nice work guys.... keep pushing

Wow I been busy and haven't logged on since yesterday and I see people startin to bring out the big guns. NICE!

As promised Chuchnit here is my shot of my GPU's. Too bad they are pointless due to my never ending RMA's.