Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclockaholics Competitive Benchmark Team (http://www.overclockaholics.com/forums/forumdisplay.php?f=100)
-   -   May (insert funny pun here) bench thread (http://www.overclockaholics.com/forums/showthread.php?t=5177)

Splave 06-01-2012 05:26 AM

Quote:

Originally Posted by DOM (Post 92559)
:ohcrap:

So mines about to meet that fate then also :laughing:

lol dont worry my dead one is the guinea pig for applying silicone to seal it back up ;) yours will look like it was never taken off so you can atleast get your money back out of it. :thumbsup:

Splave 06-01-2012 09:55 AM

finally hit 500k
http://i.imgur.com/nns82.jpg

but imc on chip will not boot over 2400 which is pretty lame
max 1m is 6.56ghz

thebanik 06-01-2012 09:55 AM

Quote:

Originally Posted by Splave (Post 92557)
well both 6.5ghz chips are dead so that sucks....lol do yourself a favor and leaving ihs on, cpu-z was able to max the same but 1m pi lost 200mhz.....aka there is no gain for retimming ihs....repeat there is no gain for retimming ihs.....reapeat there is no gain for retimming ihs....FUCK SHIT BITCH ASSHOLE

alright that feels better :) ordering 2 more

That sucks, there goes my chance of getting a decent chip, :(

Splave 06-01-2012 09:58 AM

Im not stopping till 6.8ghz so there will be more

DOM 06-01-2012 10:52 AM

1.97v nice :)

I'm still waiting lol

GFDuke 06-01-2012 12:36 PM

6360, 4c4t - 1.80v. no cb, no cbb. More vcore didn't help. That was fun though. First no cb chip i've ever had ffs. Still not the winner. :( I'll give 2c2t a try later or in the am.

DOM 06-01-2012 02:47 PM

which mb ? G65 ?

still waiting..... pos UPS, hope they get there before i get to tipsy :laughing:

DOM 06-01-2012 03:41 PM

both are 3215B298

DOM 06-01-2012 09:42 PM

first cpu was crap :( idk if i even wanna try the 2nd one

thebanik 06-01-2012 10:58 PM

Quote:

Originally Posted by DOM (Post 92577)
first cpu was crap :( idk if i even wanna try the 2nd one

Same luck here too, got a 3570K, 1.44V for 4.8Ghz......Wont do 5Ghz even at 1.525V, any point in putting it on LN2??

BenchZowner 06-01-2012 11:15 PM

Yes.
Air means shit.
It can suck balls on air, even under 4.4GHz, and kick ass on LN2.

You don't want to sell/kill a chip without knowing that it ain't good on LN2.

GFDuke 06-01-2012 11:56 PM

Quote:

Originally Posted by BenchZowner (Post 92579)
Yes.
Air means shit.
It can suck balls on air, even under 4.4GHz, and kick ass on LN2.

You don't want to sell/kill a chip without knowing that it ain't good on LN2.

^^^He's Right^^^

Yea Dom I'm on the GD65. Only thing i don't like is Control Center will only give me up to 1.8vcore. Other than that i like it.

Well it looks bad. I went from a no cb no cbb to a -150 cb and 130cbb overnight. How the fuq does that happen. And, i'm seeing alot of FF's and A3's stopping me from booting. Runs fine at 50x up to 55x that all shes got. I think I'm gonna send it back to the Egg for a replacement. I hope i get one. Really sucks... i have 200 liters of juce here.

DOM 06-02-2012 08:51 AM

okay idk what had happend but it started acting like crap mem wouldnt oc and couldnt get in W7 even at stock lol

on the stock cooler right now at 4GHz 2730mem :Dizzy:

i did notice some pins lil out of place in the center middle area towards the dimm slots but not sure if it was like that before i started on ln2 cuz i did drop it when taking it out after i was done to let it dry out :blush:

but ill try out the other and see how it oc and go back to this one

Splave 06-02-2012 03:49 PM

Quote:

Originally Posted by GFDuke (Post 92580)
^^^He's Right^^^

Yea Dom I'm on the GD65. Only thing i don't like is Control Center will only give me up to 1.8vcore. Other than that i like it.

Well it looks bad. I went from a no cb no cbb to a -150 cb and 130cbb overnight. How the fuq does that happen. And, i'm seeing alot of FF's and A3's stopping me from booting. Runs fine at 50x up to 55x that all shes got. I think I'm gonna send it back to the Egg for a replacement. I hope i get one. Really sucks... i have 200 liters of juce here.

x55 is an msi board issue not a cpu issue.

DOM 06-02-2012 06:25 PM

3 Attachment(s)
i guess the bot crashed alrady how lame lol

well 2nd one wasnt much better but i did get some 7970 & CF runs :D

ran 3870CF 01 with the last drops :laughing:


http://www.overclockaholics.com/foru...1&d=1338699303

http://www.overclockaholics.com/foru...1&d=1338698733

http://www.overclockaholics.com/foru...1&d=1338698849

Kal-EL 06-02-2012 08:56 PM

Noice, does the toothbrush increase airflow?

DOM 06-02-2012 09:22 PM

Quote:

Originally Posted by Kal-EL (Post 92596)
Noice, does the toothbrush increase airflow?

:laughing: its to keep the water in :D

GFDuke 06-02-2012 11:51 PM

Quote:

Originally Posted by Splave (Post 92592)
x55 is an msi board issue not a cpu issue.

Found out my CB issue was bclk. No cb @ 105bclk and up. Thanks Dom.

GFDuke 06-03-2012 09:05 AM

Turns out my reference card was better than my lightning.

DOM 06-03-2012 09:08 AM

hey duke where was your cpu made in ?

im guessing the costa rica are no good it seems :P

Splave 06-03-2012 10:35 AM

aristidis 6.8ghz is costa rica :) so there are some that are good

DOM 06-03-2012 10:39 AM

Quote:

Originally Posted by Splave (Post 92608)
aristidis 6.8ghz is costa rica :) so there are some that are good

i have a better chance winning the lotto then :laughing:

GFDuke 06-03-2012 11:46 AM

Malay

I just realized that my lightning stock clocks are 925/1375. WTF is up with that? It was advertised as 1070/1400. Bitches ripped me off?

EDIT: ok nm The standard bios has the high clocks and the ln2 bios has the low clocks. Is that the way all cards are?

Splave 06-03-2012 05:28 PM

lmao dukie

3 more ivy comming, and just put in an offer on a house so I figure binning needs to be sped up a bit lmao

OC Maximus 06-03-2012 08:06 PM

Hope all goes well on the house offer bud :thumbsup:

thebanik 06-03-2012 09:20 PM

Quote:

Originally Posted by GFDuke (Post 92605)
Turns out my reference card was better than my lightning.

was??? Did you sell it off???

GFDuke 06-03-2012 11:19 PM

Quote:

Originally Posted by thebanik (Post 92632)
was??? Did you sell it off???

Not yet. It's in my gamer but i have it fs on flea bay for 450.00.

Splave 06-04-2012 02:47 AM

Quote:

Originally Posted by OC Maximus (Post 92631)
Hope all goes well on the house offer bud :thumbsup:

thanks bro :) they accepted and its just pending home inspection and bank confirmation :thumbsup:

Witchdoctor 06-04-2012 04:46 AM

Congrats Al............ :thumbsup:

Splave 06-05-2012 09:21 AM

http://i.imgur.com/g9NWC.jpg

hope one of these is the one, im tapped out for a month or 2

DOM 06-05-2012 09:56 AM

there all the same batch XD

costa rica ?

Splave 06-05-2012 10:08 AM

Yep 13b's :D just realized this once I opened them all up.....

http://i.imgur.com/aoIxm.jpg

they are all pretty beat up, idk if this is a big deal or not....seems strange

GFDuke 06-05-2012 10:24 AM

Did you get them from the Egg?

Splave 06-05-2012 10:27 AM

no supe rbiiz, there are no notches or scatches on the side hold downs so that is promising

GFDuke 06-05-2012 10:33 AM

They look like they've been used. Whats the wafer #'s.

It could just be marks from the stamp. If all 3 are 7ghz i'll buy one. Loool

DOM 06-05-2012 10:46 AM

i would bench them with out the socket braket and send them back if they suck :laughing:

Splave 06-05-2012 10:55 AM

lol within 5 minutes of my email super biiz called and said they would look into it for me and check the warehouse, pretty good customer service!

GFDuke 06-05-2012 11:05 AM

Yea thats cool. I've bought a few chips from them in the past. Only thing i don't like about them is they use mandatory signature shipping. It's a bitch to try and be home when UPS shows up.

BenchZowner 06-05-2012 01:25 PM

Don't worry about these marks Splavezor, they're present on many boxed chips, not used ones ;)

Splave 06-05-2012 01:28 PM

Guess I was just concerned that the other 10 did not ;) any ideas why some are thrown across the floor at intel before packaging? they will be the first to deny me rma because of scuffage lol


All times are GMT -10. The time now is 02:55 PM.


Copyright ©2009 Overclockaholics.com