[Dentlord]

Finally broke the 600 barrier, booting at 610 so far, and check out that shmexy ram speed, some old Pi Blacks I had lying around hehe

[crustytheclown]

Good to hear that,
do me a favor and try DRAM static read control and DRAM dynamic write control ENABLED at the bios.

[Chuchnit]

Originally Posted by GeorgeStorm

Slightly off topic, how much does the PL affect benches (2D)
Just wondering cos when I've taken my board high (550+) the PL has been on auto methinks, so no idea how high/low :/

IIRC, its kinda like RTL's on X58. Not huge, but it does give that last touch of efficiency. Of course I'm sure way loose just sucks.

Originally Posted by Dentlord

Finally broke the 600 barrier, booting at 610 so far, and check out that shmexy ram speed, some old Pi Blacks I had lying around hehe

Nice man. Quit fooking around and get that dewar filled

[Dentlord]

Originally Posted by crustytheclown

Good to hear that,
do me a favor and try DRAM static read control and DRAM dynamic write control ENABLED at the bios.

They are enabled, I had to change that early on and it helped a ton

If I set them to disabled or auto it wont post.


It seems that 625 is about my limit without some cold on the NB. That is fine though, just want to be able to get some HW boints out of this chip for teh team

Now its on to the f1 and ln2 weeEEeeEee

[Kal-EL]

Good luck Joey

[Dentlord]

Ok does the REX play nice with quads? If I have a shot of hitting 5ghz with the q6600 ill give it a go today...
What kind of bus speeds can I expect with a quad core?

[DrNip]

Dunno. You looked at HWBot for this?

[Dentlord]

Net is down at the hotel, posting on my phone so searching the bot will be a pain, I'm gonna give it a shot here in a minute. It won't take too much ln2 to find out.

[GeorgeStorm]

Highest legit with the Rampage methinks:
http://hwbot.org/community/submissio...hz_4939.92_mhz
As this one is wrong, 13x multi?
http://hwbot.org/community/submissio...hz_5005.13_mhz

But overall seems P35 seems to be the best, although that may be due to the time at which the cpu came out.

[DOM]

Originally Posted by GeorgeStorm

Highest legit with the Rampage methinks:
http://hwbot.org/community/submissio...hz_4939.92_mhz
As this one is wrong, 13x multi?
http://hwbot.org/community/submissio...hz_5005.13_mhz

But overall seems P35 seems to be the best, although that may be due to the time at which the cpu came out.

you beat me to it

and the 13 multi cuz its a ES