[kikicoco1334]

dude that setup is sweet bro!

[ny_driver]

Sounds like a great plan to me. I'm very interested to hear how it works out. I want to see how far you can get that 965BE. Mine runs like a champ @ 4.5GHz/1.5v if kept very cold.

[OC Maximus]

Originally Posted by Kal-EL

Its nice and thick, might be good for socket insulation with the F1, if cut out just right.

Get me some measurement and I'll cut you out a piece if you want. I still have a little left.

Originally Posted by kikicoco1334

dude that setup is sweet bro!

Thanks Bro!

Originally Posted by ny_driver

Sounds like a great plan to me. I'm very interested to hear how it works out. I want to see how far you can get that 965BE. Mine runs like a champ @ 4.5GHz/1.5v if kept very cold.

I think my main problem is going to be finding a coolant that can keep up being cooled by Alcohol/DICE. Water/DICE is not an issues. I should be able to run sub-ambient no problem but sub-zero will take some serious thinking.

[kikicoco1334]

Originally Posted by OC Maximus

I think my main problem is going to be finding a coolant that can keep up being cooled by Alcohol/DICE. Water/DICE is not an issues. I should be able to run sub-ambient no problem but sub-zero will take some serious thinking.

dose that thermaltake shit work?
that's what i have used in the past..
idk.. i have never taken it down sub zero with it..

[OC Maximus]

After doing a little reading, looks like Alcohol freeze around -89C.

(3) 16oz bottles of 91% Alcohol mixed in with 1# of Dry Ice made for a very thick Alcohol paste. Temps must have topped out close to -80C. Unfortunately my crappy kitchen thermometer wigged out at -50C.

Hmmm, I need to do more thinking........

[ny_driver]

Straight antifreeze is good to -84 Celsius.

You just need to not be asking your pump to fight through vapor-lock as well as pump viscous fluid. You probably would need to mod out the water-block a little too, but that's easy. If you can make it gravity fed and put the pump near the end of the return line that takes a lot of strain off the pump......Mine anyways.

[OC Maximus]

If methanol wasn't so corrosive to o-rings and highly flammable I would give it a try . Not sure about its ability to pick up heat though. It freeze at -97C. I have quite a bit of experience with methanol injection in high compression engines but I wouldn't really want to run it in a computer in my house.

[OC Maximus]

Originally Posted by ny_driver

Straight antifreeze is good to -84 Celsius.

You just need to not be asking your pump to fight through vapor-lock as well as pump viscous fluid. You probably would need to mod out the water-block a little too, but that's easy. If you can make it gravity fed and put the pump near the end of the return line that takes a lot of strain off the pump......Mine anyways.

I still don't think that DDC pump will handle straigt anti-freeze for too long. Mine was pumping but got really hot and flow slowed way way down. And this is with no waterblocks in the loop.

[kikicoco1334]

hmmm didn't know that!
learned a lot here

[Patch]

I've seen acetone used in chillers, but it eats through stuff pretty quick.

.......not to mention the flammable issues......