[kikicoco1334]

vcore 1.400
vtt +300mw
cpu pll 1.98
qpi pll 1.4
ioh vcore 1.175
ioh/ich 1.600
nf200 1.300

what should i set the vtt pwm and cpu pwm?

[Chuchnit]

I alway use 1240/490 or somewher close to that. It is the next to highest freq. Just remember that your pwm will run way hotter with higher freq.

[kikicoco1334]

vcore 1.4175
vtt +150mw
cpu pll 1.98
qpi pll AUTO
ioh vcore AUTO
ioh/ich AUTO
nf200 AUTO

here is what i am running now to be stable at 4200mhz (200x21) with HT and Turbo

Originally Posted by Chuchnit

I alway use 1240/490 or somewher close to that. It is the next to highest freq. Just remember that your pwm will run way hotter with higher freq.

thanks man i monna try that when i get home =)

[Neuromancer]

Raise QPI PLL to near the same as VTT if not the same. Raise IOH to 1.3 raise IOH/ICH to improve 3D performacne (thats PCIE voltage 1.65 wont kill it, I usually do 1.6-1.625) NF200 I have no idea. CPU PLL you can leave at 1.9 at the highest IME, you can run lower too, although I think dropping it is one of the reasons for more cpu degradation. But thats just a theory, I do not have the ability or resources to test it.

Should be able to drop the vcore a little bit I do not usually use HTT on so its hard to say just the couple of benches that benefit from it, still seems a little high for 4.2GHz..

[kikicoco1334]

yeah.. i am so done with this 3dbenching bs!
so many factors it's not even funny!
taking a quick break from it and gonna go back to my sweet sweet 775 Z-PUC =)
and my 920 chip REALLY sux! it's not gonna run the bench with out 1.41250V! WTF!
here is my final scores
3DMark06

3DMark05

3DMark01

[Neuromancer]

Disable HTT for everything but Vantage, 06, PC05 and Wprime.

01 really needs high CPU score. Was asking about link fast modes the other day and Allen said it should help in 01 (because you can clock higher)

Also make sure to click the guides link on the left there is a link to Vivi's 3D01 school in there. Gives you approximate LOD settings for each bench and the right run order. I suck at 3D too TBH. I started off with a score in that area and managed to raise it over 20K points by following the guide But I was running a 4890.

[Patch]

Make sure you downoad GPUZ.

It's required in the screen shot in competitions or if you're planning on submitting to the bot.

[DrNip]

Screenshots are only required for non-Futuremark benches as you have an Orb link instead. I think that is BS as Futuremark always picks up your CPU wrong, not to mention you can't see peoples RAM timings and what not. :( I submit a screenshot with all benches though.

[kikicoco1334]

Originally Posted by Neuromancer

Disable HTT for everything but Vantage, 06, PC05 and Wprime.

01 really needs high CPU score. Was asking about link fast modes the other day and Allen said it should help in 01 (because you can clock higher)

Also make sure to click the guides link on the left there is a link to Vivi's 3D01 school in there. Gives you approximate LOD settings for each bench and the right run order. I suck at 3D too TBH. I started off with a score in that area and managed to raise it over 20K points by following the guide But I was running a 4890.

thanks alot dude!


gonna try that after class today =)












just got gpuz =)

[kikicoco1334]

back of the computer


wish it has 2 sets of the on and off hook ups


first page of bios


memory feature page 1


memory feature page 2


voltage control page 1


voltage control page 2


cpu feature


pc health