[kikicoco1334]

kk.. now i just dug out my Swiftech pump MCP655, Swiftech reservoir MCRES-Micro, Swiftech MCR320 AND MCR120 radiator... as i was looking around i found there was this little white thing in the corner of the box i picked it up, and turned out if was one of my old peltier i have used in the past , so i hooked it all up and all..
btw how hard dose the MCP655 sock?
cuz before i hooked all up in a closed up system it doesn't even sock at all...
i thought i was broken i was freaking out but as soon as i hooked it up in a closed setup everything starting to work...... WTF? or is it just me?


and now here is what i got...
http://img836.imageshack.us/gal.php?g=p1000217z.jpg

[Hondacity]

that pump is high flow...mid pressure....you need to bleed the loop first.

just becareful with the 12v.

[kikicoco1334]

Originally Posted by Hondacity

that pump is high flow...mid pressure....you need to bleed the loop first.

just becareful with the 12v.

yup!
now i just gotta install all that in the rig then done =)


btw it hits sub zero with out the chip installed

[rickss69]

Here's a project for you kiki...looks like a lot of fun to be had here... http://www.overclockers.com/nuclear-...water-cooling/

[Neuromancer]

Whats the rating on your pelt?

[kikicoco1334]

Originally Posted by rickss69

Here's a project for you kiki...looks like a lot of fun to be had here... http://www.overclockers.com/nuclear-...water-cooling/

that's still a little bit too much for me
i was gonna use my old car rad for it but my dad accidentally put it in the trash
what an ass! lol

Originally Posted by Neuromancer

Whats the rating on your pelt?

i think it's a 68W pelt.. or 60 something




so...
when i was playing around and just left it on and just walked off =)
and then when i came around washing my hand i dropped a few drops of water on the pad accidentally, so i was gonna wipe it off...
and the water was not going away when i was wiping it...

THE DAMN THING GOT ICED!

[MaadDaawg]

Water kills

Always insulate the board around the socket and make sure your connections are tight.... or else

Insulate around the pelt too as condensation will form otherwise. Don't think 68 is gonna do you a lot of good once your slamming the petal to the metal, but, let us know

[Splave]

WATER BONG!%!@

[rickss69]

Originally Posted by Splave

WATER BONG!%!@

Yep - I'm going to do it just for the fun of it.

[kikicoco1334]

Originally Posted by MaadDaawg

Water kills

Always insulate the board around the socket and make sure your connections are tight.... or else

Insulate around the pelt too as condensation will form otherwise. Don't think 68 is gonna do you a lot of good once your slamming the petal to the metal, but, let us know

i insulated the board just like i was running it with ln2 or dice
everything was good but not great...
i just had everything hooked up and just had a few test run and all..
it was not wroth the trouble at least not the low wattage petal

i may get like a 180 or 250 just for the hell of it
go big or go home right?

Originally Posted by rickss69

Yep - I'm going to do it just for the fun of it.

same here..





i was really that big of a water fan
that's just me tho
i ran water for a little
it's just one of those things not really for me..

on the other end...
DICE is a hell lot more fun then what i though ..
and LN2 has always been funner then a retard trying to hump a door nob
i can do it all day long and not get sick of it