[MaadDaawg]

Originally Posted by Witchdoctor

tell me this is not your 24/7 ride ...........

what a gamer it would make huh

[thebanik]

Wow!!!!! looks sexy those pics.....cant wait to see the results

[MaadDaawg]

Good news is I kicked it over this morning and everything works

Had to reinstall the video driver to get the quad sli recognized then I turned off everything I could think of (and probably then some). Ran Vantage at all stock speeds (47K+) just to make sure I didn't turn off too much and came through with flying colors.

All shut down now to cool off some while I eat lunch, then I'll start playing with the clocks and the volts and see what I can pull out of this

Anticipation.... rofl

[Witchdoctor]

[MaadDaawg]

Could be very apropo WD

So far it refuses to OC It hangs at 33 or 66 at times, and at other times hangs at 01 or 03. Won't even boot at the gamers preset for christsake. WTF you you want for a $1K CPU ..

Either I have the crappiest processor built or something else ain't right. Going to let everything warm up, pull the phase head and possibly redo the eraser to make sure it's water tight.

Then, try again...

If that fails, I'll have to check out Intel's crappy overclocking chip warranty

Does LOOK pretty though don't it

[Witchdoctor]

pull the cards and see how the CPU clocks ........

just chuck any POS in the slot

that will give you the quick answer,

Could be power bro

possible one of your PS is not up to the job ......

I think that was holding me back benching this weekend in CF ....

[MaadDaawg]

Man.. I got 2 x 1200 watt PCP&C turbo cools on this thing Can't remember the number, but I had it up around 5ghz on air when I first got the board, so maybe you're right

Going to be a bitch pulling 4 wc cards though... maybe I'll just use the switches and isolate the one PSU first... be a lot easier although AB shows all 4 cards up and running

[Witchdoctor]

yea but running them and over clocking them are two different animals, hit Patch with a PM, he did some 4x 580 benching, know he was scooping up AX power supplies as the TPQ Antecs did not have enough pizazz........

hope one is not going out on you, those PCP&C ain't no cheap date ..........

Good luck bro .........

[punx223]

disable with switches all but the main card then see if cpu oc works

could be water entry to socket bro. but quick test first

[MaadDaawg]

Just had one to OCZ and they checked it and said all was fine ?? The other one ??? rofl

Originally Posted by Witchdoctor

yea but running them and over clocking them are two different animals, hit Patch with a PM, he did some 4x 580 benching, know he was scooping up AX power supplies as the TPQ Antecs did not have enough pizazz........

hope one is not going out on you, those PCP&C ain't no cheap date ..........

Good luck bro .........