[Hondacity]

Originally Posted by Kal-EL

Wouldn't have a clue on how to use photo shop, I know how to use smilies tho-

i'm jusss kiddin boss...

[Dentlord]

Just snagged a 5770 from Craigslist for some hw boints

[Splave]

benched some 920 this morning did okay, reallly likes pci-e on the r3 e

[Kal-EL]

I was jacking some Redonkeyless and 980x action tonight but Fermi was "Redonkeyless" and did all sortsa crazy shit so I worked on my cpu clocks but I think I was a lil light on IOH Vcore. Either way, had to shut down, was running too long and frosted all over, thx fermi.

I'm up to 6030mhz 6c6t for 3D03 @ 1.72vCore. What kinda nb volts you folks been giving above 6ghz?

[Splave]

I usually am around 1.45v kal 6ghzs 3d is no small feet especially with chips of late


the 920, I was pushing 248x21 at 125pci-e speed...then tryed 130 hit 255x21 but get ntfs bsod's think my vertex 2's are crapping out. Was just thinking I should run off the marvell controller next time right? thats not affected by the pci-e mhz correct?

[Dentlord]

Originally Posted by Splave

I usually am around 1.45v kal 6ghzs 3d is no small feet especially with chips of late


the 920, I was pushing 248x21 at 125pci-e speed...then tryed 130 hit 255x21 but get ntfs bsod's think my vertex 2's are crapping out. Was just thinking I should run off the marvell controller next time right? thats not affected by the pci-e mhz correct?

Wowsa, I keep IOH around 1.25-1.3v, mebeh I needz to up it!

That is SICK pcie speed, I think you are right about running the other controller ports for HDD when pushing pcie.

[Splave]

helped with pifast atleast

PiFast progression on r3e w/980x
Basic settings
980x x33 multi
ram 2:10 7-8-7-19


Settings that change are mentioned, if not assume its the voltage from previous run.


33x185
1.828 vcore
1.65 CPU pll
1.488 vtt
1.35v ICH
PASS

33x187
PASS

33x188
FAIL BSOD

33x188 - Bumped vcore only
1.878 vcore
PASS

33x190
FAIL ERROR in computation

33x190 - Bumped PLL down
1.601 CPU pll
PASS

33x191
FAIL FREEZE Screen

33x191 - Bumped vcore and vtt
1.892vcore
1.495vtt
FAIL FREEZE Screen still

33x191 - Bumped ICH
1.495 ICH
PASS

33x193
FAIL BSOD

33x193 - Bumped Vcore and ICH
1.925vCore
1.55v ICH
PASS

Conclusion, pump the ICH voltage 1.55-1.6v ICH and lower the CPU PLL, even down to 1.55v CPU PLL.


Blasting ram voltage did nothing for me, just caused errors. Hope this helps someone

[Patch]

Kal, I've tried 1.25 to 1.6 on ioh and it seemed to do best at 1.35 to 1.4 range.

My 920 arrived yesterday so I'll be joining you soon Splave.

But I prepped the REX last night with a NB pot so will be doing that first......trying to decide whether to freeze the RAM too for 01.....

Off to Monterey and Santa Cruz for a few days. Benching upon return.

[RomDominance]

Safe travels Patch.
Ive got the 655 on the formula ready for cpuz this morning.

[Splave]

Hit it nig rofl call ya in a bit