ClassicPc ingenuity ;)

THUMBS UP!

Here's a little more on how I made the pot.
Of course I didn't leave it as you saw it. The entire assembly is lightweight yet strong since the tube is very thick, being it came from a bat. Since I made it I've had the base MIG'ed to the tube to complete the construction and made a mounting plate that sits on top, not bonded to the tube as originally shown.

I've also reconfigured the base itself having trimmed it up a little so it has a better fit onto the board when mounted. Had some clearance issues but trimming it fixed those problems yet it still has enough mass to be effective.
The base itself is 3/4 inch thick solid aluminum so yes, it has plenty of mass to it.

Can't tell from the pics, wuts the plexi hold-down grabbing? Just the outer insulation?

Had ran a bead of JB Weld around it to hold the plexiglass but know plexiglass isn't too good for this use.
After the piece had cracked I made a mounting plate that sits on top of the pot made so I can still stuff DICE in while holding pressure to the pot.

slick moves with the beads.

Testers agree, more photos the better.