PCS P45 goodness

[PhIlLy ChEeSe]

I got board gonna blow stuff up...............This board used to hold the world record(not mine)for memory speed back in the 775 days, lets see if we can find and beat that record. That and a few other records................

the test bed
subject TH45HP :Hi:

Here's a link to the world record we shall be shooting at, one of a few.........Despite current trends-I am AN OVERCLOCK-A-Holic!
http://hwbot.org/submission/972015_lodewijk1978_reference_clock_ga_ep45t_extre me_750.92_mhz
Here are the records of the Test Subject
http://hwbot.org/hardware/motherboard/tp45_hp/

I'll post more latter have to OS install, bring her up to speed, then we will add water to CPU n Chip sets and GPU.
Then rip it apart
Set up at present

BioStar TH45HP(SLI/CR-X)factory cooler fer now
Corsair DOM'S 1066
E6600(brand new been sitting around waiting)
AMD 4980(1 for now)
Intel 520 series SSD
OS:windows XP

[Witchdoctor]

Damm, that is one fugly board .......... :laughing:

Rip it up Philly ............. :thumbsup:

[PhIlLy ChEeSe]

I can't install raid drivers during XP without a floppy ugh!!!

[Kal-EL]

Damm, that is one fugly board .......... :laughing:

Rip it up Philly ............. :thumbsup:

lol, skittles!

Tear it up bro! Taste the Rainbow! :thumbsup:

[GFDuke]

Go with a single drive for benching. You don't need to use RAID.

[PhIlLy ChEeSe]

Go with a single drive for benching. You don't need to use RAID.


OK, I know I used to lose the raid cause of the over clock. Makes sense. Already spend four hours trying lols, fawking hate snags.

@Kal, my old board I got two of them now..:thumbsup:

[PhIlLy ChEeSe]

Finally installed the OS ugh!

[GFDuke]

OK, I know I used to lose the raid cause of the over clock. Makes sense. Already spend four hours trying lols, fawking hate snags.

@Kal, my old board I got two of them now..:thumbsup:

Yea cause onboard RAID blows when it comes to overclocking. I did find though that when I used my RAID card and overclocked I never lost a os. :) But that was when I was into PCmark05. BEFORE they totally screwed the bench up with allowing all kinds of stupid tweaks. Now its a pussy bench test.

[PhIlLy ChEeSe]

Yea cause onboard RAID blows when it comes to overclocking. I did find though that when I used my RAID card and overclocked I never lost a os. :) But that was when I was into PCmark05. BEFORE they totally screwed the bench up with allowing all kinds of stupid tweaks. Now its a pussy bench test.


LOL!
You had an external rad card, correct, that's the one you was selling recently? Where is it? :laughing:
I can change it to ACHI after install right? Do I have to use the Raid drivers then? I can't stand IDE, but it was the only way I could see the rad to install the OS....I want to turn on ACHI then install the drivers like I'm doing a fresh install but then abort after the drivers r in and it SEE'S the drive?

[GFDuke]

No need for RAID drivers if you're not doing RAID. Yes you should be able to turn over to ACHI after you install in IDE mode. I would also use the Intel Rapid Storage Utility.

No I didn't have the RAID card for sale. I had ACARDS for sale.

[PhIlLy ChEeSe]

I cant get CPU-Z to read my CPU properly? It show X11 on the CPU but im running 11.5multi? I need an older version of CPU-Z anyone got one? :thumbsup:

http://i335.photobucket.com/albums/m479/jaggerwild/CPU-Z_zps84027d33.png

Just warming up, I got to get used to these chips again...............................
http://valid.canardpc.com/cache/banner/2898405.png (http://valid.canardpc.com/2898405)

[Witchdoctor]

http://www.oldapps.com/cpuz.php

[PhIlLy ChEeSe]

http://www.oldapps.com/cpuz.php



Thanks man!!!
Lil up date, things r going slow I'm so noobish to this old board.

http://valid.canardpc.com/297hsc

45251.8v water :laughing:

[PhIlLy ChEeSe]

Slowly,nothing special yet but soon!

http://i335.photobucket.com/albums/m479/jaggerwild/03456114185_zps97814155.png

[Witchdoctor]

Nice work, only one guy with better clocks on air

http://hwbot.org/benchmark/superpi_-_1m/rankings?hardwareTypeId=processor_2149#start=0#int erval=20

[PhIlLy ChEeSe]

Nice work, only one guy with better clocks on air

http://hwbot.org/benchmark/superpi_-_1m/rankings?hardwareTypeId=processor_2149#start=0#int erval=20



Hell I'm on water already.......:ohcrap: though I can tell if I had sub zero it would do much more!!! This chip is pretty good, just checking the multi right now see how high it will go for now. I know when it gets cold I'll be starting all over. Well it's Saturday and the D-Ice place is closed have to wait till Monday, more time to prep!

[PhIlLy ChEeSe]

Nice work, only one guy with better clocks on air

http://hwbot.org/benchmark/superpi_-_1m/rankings?hardwareTypeId=processor_2149#start=0#int erval=20


Hey man!
whats the best multi to use with this chip, it will take me weeks if I try on my own..... I was gonna get some D ice but I have to much going on this week. Last day in my Forties, I'll be drunk the rest of the week pretty much. my two sisters coming to town to celebrate. Fawking ASUS is dragging there asses getting me another board UGH!

[Witchdoctor]

Don't know

Never benched that chip. I would assum max multi to keep the fsb in check

Even with dividers memory always seems to be the limiting factor

[PhIlLy ChEeSe]

Don't know

Never benched that chip. I would assum max multi to keep the fsb in check

Even with dividers memory always seems to be the limiting factor


YUP!
So I will have to lower it a little just to be able to up the Ghz, only pair of memory is 1066 had 1100 but they died.

[Witchdoctor]

put some active cooling on them and push the the volts,

[PhIlLy ChEeSe]

put some active cooling on them and push the the volts,


i'm gonna man!
I saw some of splave's set ups, wanna use a bag and some Aluminum foil on mine see where they can go(paid for along time ago) so if they poof its all good. right now I'm trying to get my second board ready just in case she needs to step in for her twin. Dats right I got two of um, the second one was missing a pin, I popped a pin in and a Pentium CPU this afternoon before i started drinking...................:thumbsup:
I got about twenty CPU'S, my first back up is a E5200 witch seem to scale well and a E6550(may be dead not sure), the board it came in was.
Monday it's on!! I'll post some photo's for you all :clapping:

[Witchdoctor]

Rock it Philly ...... :thumbsup:

[PhIlLy ChEeSe]

Rock it Philly ...... :thumbsup:

Got called three times in two days for work..............:morpheus:

I will, this Monday September 16th, Sunday i will spend prepping the board and football and recovering from my sisters! :laughing:

[Witchdoctor]

Your Avy is starting to look like mine ............. :ohcrap:

[PhIlLy ChEeSe]

Your Avy is starting to look like mine ............. :ohcrap:


Scarey huh?
that's the Trilogy doll from the movie, hes got the spear in the wrong hand :blink:

[PhIlLy ChEeSe]

I was searching on the bot, highest over clock on this chip is only worth 2.0 boints? I'll have to check my E5200 out. ?OK I'm gonna go with the Pentium E5200 top OC is 161 bionts

http://hwbot.org/submission/1050086_ivanqu0208_cpu_frequency_pentium_e5200_%28 2.5ghz%29_6125.09_mhz

A Vantage score I might be able to get 9.1 boints
http://hwbot.org/submission/2254121_knopflerbruce_pcmark_vantage_pentium_e5200 _%282.5ghz%29_13045_marks

Top Pentium E6600, I'm sure the two boints is easier to achieve

http://hwbot.org/submission/979656_takezo_cpu_frequency_pentium_e6600_%283.06g hz%29_5703.7_mhz

[Witchdoctor]

yea but it is the TTP that make the difference from a team prespective.

This is why our team did not make out well in the rule chnges as the Bot now rewards larger variety via TPP and these massive teams and smaller teams that have benched a larger variety are very succesful

[PhIlLy ChEeSe]

well my sisters r in town, I'm a drunk for the weekend! :ohcrap: its a junk ass pot but it will do. Question, what do I use on the CPU with the pot? Thermal or? Wat's TTP? Everything is fixed lol! My rive comes back, I'm gonna shovel da bionts!!!

[Witchdoctor]

yea had a Koolance, does the job, just keep fluid level under the poly transition as mine leaked when cold as it gets loose

TTP = Team Power Points

Last week it was your birthday, this week your sister

next week, hey the sun came up ................ :rofl

[OC Maximus]

I benched that board a few years ago. If I remember correctly, I borrowed it from a bird dog....

http://www.witnessforpeace.org/img/original/MA_birddog.jpg

[Kal-EL]

I benched that board a few years ago. If I remember correctly, I borrowed it from a bird dog....

http://www.witnessforpeace.org/img/original/MA_birddog.jpg

Uh, rofl! :laughing: