Summer Build, taking suggestions

[kikicoco1334]

Summer break is coming up, and I've always been really interested in cable sleeving, case mods, and lighting mods.

Since I've picked up one of those ThermalTake Soprano case and how nice it looks on the outside, I really want to make it look pretty inside as well.

I just ordered the cable sleeve and the heatshinks, sleeves are hot red, and the heatshinks are black.

This is what I am hopping to look like :blush:
http://i.imgur.com/wAcpQ.jpg

Setting up the lights on each corner of the case so lights will be shinning down/up to the motherboard.

The only problem I feel like I am having is motherboard.
Since the motherboard is already out of warranty (I think) I was wondering if I can somehow paint it to RED/BLACK like R3E or should I just pick up a R3E and called it the day.
I found a Rampage III Extreme for $140 no accessory or I/O plate :shock:

P6X58D Premium is what I am currently on right now.
http://www.asus.com/media/global/products/wurRaDZ8lo4Ckukj/wamfPwbaOcQAfenS_500.jpg

Not 100% sure how much extra time I'll have since I am going to be in between school and work, this is just my after school, after work project to keep me out of trouble for the most part.





Build log:
130420 - Sleeve, tools, heatshink is ordered
130421 - Sleeve, tools is shipped coming from overseas [NO ETA] Changing ETA to sometime this week. Its already in NEW YORK, NY 10199.
130425 - Instead of studying for finals, sleeved my first cable. Click here to see Post #9 in this thread (http://www.overclockaholics.com/forums/showpost.php?p=97321&postcount=9)
130429 - Sleeved the ThermalTake WATER2.0 Extreme power cable. Click here to see Post #16 (http://www.overclockaholics.com/forums/showpost.php?p=97334&postcount=16)
130430 - First full cable sleeve. Post 17 (http://www.overclockaholics.com/forums/showthread.php?p=97336#post97336)

[Witchdoctor]

R3E FTW ......... :thumbsup:

or trade the cables for blue ones

[OC Maximus]

Looks like your about to have a lot of fun buddy ;)

[ThreeDhero]

Wouldn't paint the P6X58 man i remember reading it can affect the heat transfer.

[kikicoco1334]

R3E FTW ......... :thumbsup:

or trade the cables for blue ones

I'll have to see, since money is a little tightened up not as much spending cash on hand.

But most likely i'll be getting the R3E


Looks like your about to have a lot of fun buddy ;)
Funny you got in here JUST IN TIME!
I remember you did it while back, have always wanted to do it but never got around to.

Got any tips? :D
Missed you man!


Wouldn't paint the P6X58 man i remember reading it can affect the heat transfer.
That, and i'll prob look like crap.

[PhIlLy ChEeSe]

I say paint it, Though you will have to mask off the little soldered connections(all of them), that heat sink you can strip it to bare metal then clear it out. Or you could dust paint it, then clear over it just don't paint the contact side.

[kikicoco1334]

the only thing i am really worried about as far as painting it is the fact that when i get done with it, it may look like crap

[Splave]

^this!

[kikicoco1334]

Nothing is here yet, but since I can't wait anymore, I disassembled some of my old stuff and here is what I came up with.

This is a testing cable, as some of you guys know I really like play with SMD light strips
but by having to solder a 12v + ground wire on the strip EVERY time when i need to test it is getting really freaking annoying, so I ordered two pairs of alligator clips to be soldered on there.

(alligator clips aren't here yet but the sleeving part is pretty much done)

First time sleeving cables, let me know how it looks.
I know the white heatshink is not measured right, but other than that...
give me some feed backs.

Before:
This was one of those Molex to SATA Y-split cables, after cutting off the SATA header it left me Yellow (12v) + Black (G) + Black (G) + Red (5v)
http://i18.photobucket.com/albums/b102/ghostloveff/Projects/Cable%20Sleeving/Power%20Tester/IMG_20130425_031824_zpsed946063.jpg


After:
Found some heatshink tubs in my dad's workshop :D
Red heatshink tubes are 6mm in diameter
White I think its 4~5mm not really sure.
http://i18.photobucket.com/albums/b102/ghostloveff/Projects/Cable%20Sleeving/Power%20Tester/IMG_20130425_031704_zpsfdc381f8.jpg


Close up look:

Line-in Up
http://i18.photobucket.com/albums/b102/ghostloveff/Projects/Cable%20Sleeving/Power%20Tester/IMG_20130425_030644_zpsbd1104e9.jpg

Line-in Down
http://i18.photobucket.com/albums/b102/ghostloveff/Projects/Cable%20Sleeving/Power%20Tester/IMG_20130425_030745_zps1ab38a1e.jpg

Line-out
http://i18.photobucket.com/albums/b102/ghostloveff/Projects/Cable%20Sleeving/Power%20Tester/IMG_20130425_030814_zpsb7b99cc7.jpg

NOW, I REALLY HAVE TO STUDY FOR FINALS NOW

[Splave]

perfectionist :)

[kikicoco1334]

:laughing::laughing::laughing: a little

[PhIlLy ChEeSe]

the only thing i am really worried about as far as painting it is the fact that when i get done with it, it may look like crap


No, just put it in your easy bake oven for 15 minutes boom done! :laughing:LOLZ

[kikicoco1334]

gonna try take it slow right now, I am working on just getting the cables done right now and maybe the board down the road.

been thinking about doing the power cables on the thermaltake all in one water cooler.

[punx223]

hell with sleeving... my wires look like shit... but it works :P :ohcrap:

[kikicoco1334]

dude my wires have always looked like shit, gonna try make it look like a computer for a change.
not talking about PC junkie level but not looking like shit for once would be nice

[kikicoco1334]

Sleeved my ThermalTake WATER2.0 Extreme today, gonna try do the WATER2.0 Pro after I am done with the finals.

Let me know rather you guys like the single sleeve or muti cable sleeve Thanks

End up with 94 with out taking the final exam in my equity investment class xD

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6994&stc=1&d=1367213478

[kikicoco1334]

Very exciting day!
the package arrived, and just got sleeving it.

First full sleeve. looks not as good as I expected but first time doing it, not too bad

Color is gorgeous, don't really have the right heatsink because the retard gave me the 9mm instead of 6mms and calling me not knowing how to measure.


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6995&stc=1&d=1367362371

[kikicoco1334]

Sleeved my old Zalman GV1000 cooler today.
BTw is anyone still actually looking in here?


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6996&stc=1&d=1367549664

[Altered]

BTw is anyone still actually looking in here?

Yup :thumbsup: looks very good to me, but hey what do I know I'm a rookie. :D

[kikicoco1334]

Hey! thanks guy! still learning :3