@ Mr. Scott

[Witchdoctor]

Our good friend Scott showed some interest in a tech station in another thread, so I thought I would throw one together quick for him so he could sport and OCA original over at his home base.................. :thumbsup:

Yea their the bastards that just blew by us ........... Just kidding Scott .......... :laughing:

Great job by all over at Classic Platforms :clapping:

it will be MATX, EATX and ATX compatible with a PCIe retention 120.2 rad ready with 15mm spacing & a removable motherboard tray to make mounting hardware a snap and also converts in to a hard table for sub ambient benching , Elastmeteric insulation not included as I have run out and need to order some in, sorry Scott :ohcrap:

Any way had a few extra minutes today so I thought I would get a little done on it. This is still pretty rough looking at this point.

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6634&stc=1&d=1358027570


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6635&stc=1&d=1358027570

[Mr.Scott]

I feel like a kid at christmas. :D

Pretty soon every kid in America will want a 'Witch' original. :thumbsup:

[kikicoco1334]

hahaha nice build dude!

[MaadDaawg]

3/4 in plywood, don't drop that sucker on you toe Scotty :laughing:

[Mr.Scott]

Not worried about dropping it, just about picking it up. :laughing:

[Kal-EL]

*Thread closed* (conflict of interest) :morpheus:

















:taunt: Witchy should really have his own brand of techstation already with his crazy Witchdoctor logo :)

[Bones]

:taunt: Witchy should really have his own brand of techstation already with his crazy Witchdoctor logo :)

Complete with a voodoo doll of the processor brand you don't like - Or maybe even of Massman and of course a few pins to stick 'em with for good measure.
:happy1:

[ThreeDhero]

Nice bench, clean cut.

[Witchdoctor]

Complete with a voodoo doll of the processor brand you don't like - Or maybe even of Massman and of course a few pins to stick 'em with for good measure.
:happy1:

Black Magic sold seperatly ...............

[Bones]

Oh yeah - Mr. Scott's gonna love that..... :headspin:

[DOM]

Where mine :P

How heavy is it ?

[Witchdoctor]

I am not sure how much it weighs..... ?


You just use a hard table don't you ?

[DOM]

Plastic fold out table.... :blush: :laughing:

[Witchdoctor]

That's Awful :laughing:

[Splave]

looking so fresh and so clean clean clean

[MaadDaawg]

*
:taunt: Witchy should really have his own brand of techstation already with his crazy Witchdoctor logo :)

I've been telling him that for years! The voodoo doll could be the brand logo :thumbsup:

[Witchdoctor]

LOL .........

There not that great, as Scott will soon find out, I don't have any real tools everything is done free handed :ohcrap:

I suck at painting .... :shock:

[Mr.Scott]

LOL .........

There not that great, as Scott will soon find out, I don't have any real tools everything is done free handed :ohcrap:

I suck at painting .... :shock:

I wasn't looking for a Picasso. :laughing:
It's just a bench table.......far better than the one I'm using now.
I really appreciate it Brian. :)

[Witchdoctor]

No sweat bro, I enjoy working with my hands, should be shipping on Friday or Saturday, if this effin polyurathane ever effin dries .......... :Dizzy:

Looks like a hell of a mess right now, but it will come together ............. :thumbsup:

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6642&stc=1&d=1358294879

[Zila1]

Wow, that's gonna be real nice. :thumbsup:

[Witchdoctor]

Got home from work and the poly is dry finally, 2 days for that shit to dry in the garage I will post some pics once I get it together :)

Edit for pics:

I appoligize for the crap ass camera in advance.

Should be shipping out on Friday Scott ....... :thumbsup:

Not so good at painting as you can see

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6644&stc=1&d=1358376667


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6645&stc=1&d=1358376667


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6646&stc=1&d=1358376667

[Mr.Scott]

I freakin love it. Almost looks like military stenciling. Awesome. :thumbsup:

[ThreeDhero]

Black and yellow, watch out Wiz Khalifa

Looking good WD

[Witchdoctor]

Glad you like it Scott, got a little over spray on the stecil .... :ohcrap:

Wasn't sure how many hard drives bays so I put 2x SSD and 2x magnetic

Thanks 3D .......... :thumbsup:


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6647&stc=1&d=1358380545


http://www.overclockaholics.com/forums/attachment.php?attachmentid=6648&stc=1&d=1358380545

[macsbeach98]

Scotty will be over the moon with this it looks fantastic
Top Job

[Mr.Scott]

Perfect. :thumbsup:

I see all my homies coming here to check it out.
Welcome to OCA Pete. Read some threads here, all these guys are aces.

[Zila1]

Oh man, an ultra-d will look sharp sitting in that bench. :cool3:

[Witchdoctor]

Viper 120's, OCF and a 680 lightning wouldn't look to bad either ......... :taunt:

[MaadDaawg]

Nice work as always WD :thumbsup:

[Witchdoctor]

Thanks daawg,

Zila, Noob question here

what is an Ultra D ???

Googled it and all I come up with are vitamin supliments :laughing:

[Kal-EL]

Very handsome work there witchy :thumbsup:
No, FO REALZ, really nice :)


:Hi: macs

[Splave]

Thanks daawg,

Zila, Noob question here

what is an Ultra D ???

Googled it and all I come up with are vitamin supliments :laughing:

epic DFI board :thumbsup:

[Witchdoctor]

:good:

[Mr.Scott]

Viper 120's, OCF and a 680 lightning wouldn't look to bad either ......... :taunt:

:laughing: Yeah, well...................I got a lot of stuff, but none of those 3 items. Do have a few DFI boards though. I'll have to post a few pics of some of my hardware sometime. I pretty much filled an entire walk in closet floor to ceiling.

[Witchdoctor]

:laughing:

Yea DFI was using a lot of yellow if memory serves me, What ever happen to them ? Seems like after x58 they were gone, shame they had some real killer boards, Rev was sporting a 775 DFI back in the day that he thought highly of

[Zila1]

Thanks daawg,

Zila, Noob question here

what is an Ultra D ???

Googled it and all I come up with are vitamin supliments :laughing:

:laughing: Vitamins..............this was an Ultra-D. They were/are awesome boards.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813136152

[Witchdoctor]

I remeber that board, wow that brings back some athy 64 lovin, I used to sport one of these back then

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131568

I think that is one I actually sent to Scott :) had the A8N SLI Deluxe as well

Was diggin the 939's back then

[GFDuke]

i Still have a A8N SLI Premium. lol

[Witchdoctor]

yea that was a nice clocking board, All be it I only used water back then, still have mine too only it is DOA ...... :shock:


It was great when Intel actually had competion, the 939 with the on dye IMC gave Intel a left hook for a new look ............ :laughing:

[Splave]

939 was way more fun than fm2 XD

[Mr.Scott]

939 was way more fun than fm2 XD
Agreed...except for CBB and CB. Can get to be a PITA.

[Mr.Scott]

It's here...............and it's even more awesome in person. :D

Especially like the 'hidden' OCA stencil on the bottom.

Mocking up my personal modifications for chiller and water cooling setups. Pics as soon as I have time. Winter's here again and I'll be getting busy again.

Thanks for everything Brian. You're a star. :good:

[Witchdoctor]

:laughing: had it on backwards though

No sweat Scott hope you enjoy it .............. :thumbsup:

[Splave]

frozen pics :D

[Neuromancer]

I remeber that board, wow that brings back some athy 64 lovin, I used to sport one of these back then

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131568

I think that is one I actually sent to Scott :) had the A8N SLI Deluxe as well

Was diggin the 939's back then

I never ran the ultraD

But I did have both the Abit A8N Deluxe and the ASUS AN8 Deluxe (one was a BIOS Mod board I forget which) :)


My Favorite was a barebones K8T800 Pro chipset board, that thing was so snappy and slick. Ran some quirky TCCD 2-2-2-5 at 500-525MHz. Would not run 2.5 or 3 cas AT ALL. (Apparently was fairly common). I wish I could find some result pics from that time. all I can find is me talking about it more recently though lol.

[Bones]

Here's what a good Ultra D can do with a good chip - Did this just yesterday as of this post. :cool2:

http://hwbot.org/submission/2349542_bones_wprime___1024m_athlon_64_4000_san_di ego_1517sec_562ms

If I could get it running cooler, it would run higher of course - You can only do so much on water.
Don't know if this chip has a CB yet.... But I will find out one day.

[Neuromancer]

Nice work with a San diego. I had that same chip a LONG time ago.

Did you know that San Diego means "A Whale's Vagina"?

[Witchdoctor]

:blink:


Nice run Bones ...... :thumbsup:

[Bones]

Thanks guys.
Hard to believe you can still get global points from a chip that was made over 5 years ago, yet there it is.
If I can get it colder I'll push it even farther.

Yes Mr. Scott, that was the freak chip getting it's freak on. ;)

[MaadDaawg]

Nice work with a San diego. I had that same chip a LONG time ago.

Did you know that San Diego means "A Whale's Vagina"?

I thiought it meant Saint Diego ???

[Splave]

Thanks guys.
Hard to believe you can still get global points from a chip that was made over 5 years ago, yet there it is.
If I can get it colder I'll push it even farther.

Yes Mr. Scott, that was the freak chip getting it's freak on. ;)

that is awesome :thumbsup:

[Neuromancer]

I thiought it meant Saint Diego ???

You must have been listening to that smelly pirate hooker Veronica Corningstone