July or tell the truth?

[Splave]

Found some good shit at home depot, liquid electric tape. Endorsed by rsanio and raja :thumbsup: its 5 bucks a bottle and covers a complete board front and back twice plus a bit extra.
http://www.amazon.com/Star-brite-Liquid-Electrical-Tape/dp/B0000AXNOD

peels right off when your done, no vaseline mess

http://i.imgur.com/WM5yX.jpg

[punx223]

I think soups used to do the same thing awhile back.... does it bubble under extended bench sessions? or does it hold up pretty well?


also around smaller components do bits stick there or not really?

[GFDuke]

I have the same fears. Is it like the Dragon Skin or harder? It looks hard.

[DOM]

Won't the vrms burn up

[punx223]

Won't the vrms burn up

under cold I would say no... I have run VRM on many board without cooling at all when working on DEV classified board.

but when overclocking you are at subzero temp which will cool the covered VRM components just by the close relation to the frozen CPU/container.

Definitely do not run under stress with standard cooling for extended periods.

[Splave]

they dont even get hot on air cooling ;)

its thicker stuff, I do two layers. its not like jelly like dragon skin. Its more adhesive and it feels more like a very tightly stretch ballon skin. you have to be careful to cover all the areas but with bright red it makes it a tad easier ;)

A couple layers of towel will go between this and the to stop any pooling but other than that, its ready to rock.

[GFDuke]

I wonder if this is the same. I might try it fro the hell of it. Spraying it on would be sweet.
http://www.amazon.com/Plastic-Dip-Intl-16003-6-Electrical/dp/B0010OF8ZM/ref=pd_bxgy_hi_text_c

[Kal-EL]

Yeah, I started the liquid electric tape craze way back, it'll peel off in chunks only if you cake it on, slight risk on pulling weak resistors off the board with it. I've used red, black, white with minimal difference in consistency cept that the white seemed more watery.

I also have a cannister of the plastic dip which was gonna be used to coat my gpu pots and the F1, never got around to doing that.

All in all great goop. I did have a tinsy bit of trouble picking out the tiny pieces that didnt peel off.

[Witchdoctor]

I am still on eraser ............ :ohcrap:

[DOM]

I am still on eraser ............ :ohcrap:

I think that's what I'm sticking with I didn't have much luck with vaseline and never going to use it again :P

[MaadDaawg]

I think that's what I'm sticking with I didn't have much luck with vaseline and never going to use it again :P

:rofl:

told ya

:laughing:

[kikicoco1334]

Happy the 4th kids.



I think that's what I'm sticking with I didn't have much luck with vaseline and never going to use it again :P

not gonna say it but we are all thinking about it...

[Neuromancer]

Happy post 4th. Still in recovery from my massive sunburn LOL

Finally got electric back at home, so should be heading there Sunday. Going to play around with some 4 core bulldozer action so will make a couple of submissions even if they are not frozen results.

[Splave]

found a good one :X lmao

http://i.imgur.com/oAHQ1.jpg

back in top 10 pro leagure ftw :D

[Neuromancer]

I hate you splave. If I got a global score you would just crush it on whimsy. LOL

Seriously though knock it outta the park and give us peons something to strive for :)

[DOM]

nice one :P

i got another coming from rma coming XD

but im done binning and start posting some scores with my best cpu and do some 3D :D

[Splave]

Yeah I have 3 more coming and 1 more Rma but won't be long before new shit is out

[DOM]

Gpu or new cpus ?

[Splave]

cpus

[Splave]

holy low voltage, think I found another gem

http://i47.tinypic.com/nc1uaa.jpg

[Witchdoctor]

damm, thats nuts , 5ghz at 1.25 core ...........

if that thing scales ........................ :scared:

[dumo]

Aesome chip low voltage:thumbsup:

Hows imc Splave?

[Splave]

probably shit with my luck!

[DOM]

i want your shit :rofl

i got a L221A996 cant even boot at x50 :P


are you just booting on air at those speeds ?

[Splave]

yeah lol just booting up which is like same as wprim1024 in xp is seems lmao

PS TU FU tell your mom to accept my friend request damnit!

[DOM]

holy low voltage, think I found another gem

http://i47.tinypic.com/nc1uaa.jpg

So how did this cpu do on ln2 ?

Also get a hair cut I think that's why she doesn't wanna add you :laughing:

[Splave]

preview of matrix :) with a couple of mods

http://i.imgur.com/4bseD.jpg


http://i.imgur.com/pklxO.jpg


But I like to call it the red pill :)

[GFDuke]

Nice. I guess i need to sell my lightnings now. lol

[Splave]

(not yet wait for looc)

[crio]

Testing some 32M today....Cpu is back on the Asus board and rocks....F@ck you again gigabyte....:p


http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/481084_4303133424872_988710274_n.jpg

[Splave]

nice run mate! now just need to get the mem up to speed :D

[crio]

No can do, one of my ripjaws 2133c8 is dead and my other bbse aint that good.

[Splave]

damn, needs some psc!

[crio]

I got PSC but seem no good....Can you post a pic with your PSC and memtweak it to get and idea?Can seem to make em run 2500+ 8-12-8

[Splave]

here is frozen mems
http://i.imgur.com/llNen.jpg



here is pi's on air
http://i.imgur.com/IfdFn.jpg


make sure all the ic's are making good contact

[kikicoco1334]

PS TU FU tell your mom to accept my friend request damnit!

wait where did you send the friend request to? :shock:

Returning of the mini titans =.=
just found my Q6600 and some other old stuff i never knew i had, gonna give it another try sometime before school starts see what's up.
http://i18.photobucket.com/albums/b102/ghostloveff/p0ts2hkp.jpg

[kikicoco1334]

quicky update, just picked up 2 sticks of BL12864AL804.16FD3 and 4 sticks of BL12864AA80416FD3, as far as i can tell, those have one of the highest chance to get D9GMH or D9DQW and have a small chance of getting D9GCT or D9GKX.

from my understanding D9GMH will have higher headroom while the D9DQW can generally run a lower latencies with a higher frequency

Then again, who give a crap about DDR2 now XD, DDR9000 is about to come out!

[crio]

Splave what do you mean they make good contact?

[GFDuke]

Incoming

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131858

[DOM]

Incoming

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131858

Damn $400 fuck that I'm to poor :P

[Kal-EL]

Incoming

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131858
SHmeXy Ride :good:

[kikicoco1334]

Incoming

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131858

very exciting bro!

[GFDuke]

Stay tuned. Gearing up for something special. ;)

[Witchdoctor]

Do you have a monster CPU coming or going the binning rought

[Splave]

he has a nice chip comming :) and I think he plans on using both lightnings he has (just a guess on the last part)

[Splave]

My name is Splave and Im a memory Overclockaholic.....


http://i.imgur.com/qV5yT.jpg


Thats about half of it :X

[DOM]

lol idk if this would be enough for you to store them http://www.ebay.com/itm/400159340732?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[kikicoco1334]

Al, i see a lot of GSkill and Corsair and mushkin reds and blacks and like 6 sticks of kingston... what are you trying to do there?

(or am i the only one on the team only have 1 set of 775 and a little over half set of 1366?)


DOMass, that's for little girls!
this is how real man roll! XD
http://i18.photobucket.com/albums/b102/ghostloveff/P1010467.jpg

[GFDuke]

775 and 1366 ram? I'm confused.

[MaadDaawg]

lol me too :blink:

[DOM]

he must be talking chinese :laughing:

[kikicoco1334]

775 and 1366 ram? I'm confused.
no just bench rigs, all i have is 775 and 1366 atm, but i should have a ivy setup soon not sure yet.
the board is a GA-Z77X-UD5H as far as i can tell it's kinda crap but if i can get it for a stupidly good price i'd do it :P

you got some nice rams there. still got the good'o STT and some Crucial black DDR2 (are they the .16FDxs?)


lol me too :blink:
at least you have something else to play on while bench on the old right....
my main is the E762 + 970 and my bench setup is the Ccommando + that half million 775 of my :shock:


he must be talking chinese :laughing:
if i was talking in Chinese i'd be saying 我日你妈

[Splave]

does that say fuck your mother?

[Bones]

Eh - You showed yours so I'll show mine too. :ohcrap:

This ain't all of it and I have a few pieces I need to track down but this is the majority of it. Look closely and you'll see something you don't see very often anymore (NOT the EDO or whatever it is RAM to the sides :Dizzy: ). Sorry about the pic quality, conditions weren't exactly great but did the best I could here.

[DOM]

if i was talking in Chinese i'd be saying 我日你妈

我操你妈逼 :)



You guys are hoarders.... :thumbsup:

[Splave]

吃我的球

[Splave]

Eh - You showed yours so I'll show mine too. :ohcrap:

This ain't all of it and I have a few pieces I need to track down but this is the majority of it. Look closely and you'll see something you don't see very often anymore (NOT the EDO or whatever it is RAM to the sides :Dizzy: ). Sorry about the pic quality, conditions weren't exactly great but did the best I could here.

Sweet kits!

[kikicoco1334]

吃我的球
it's 吃我弹弹

and the hell with you guys and your damn google trans.....
taking a way all the funz

[kikicoco1334]

我操你妈逼 :)



You guys are hoarders.... :thumbsup:
DOMass i am telling your wife that!
:laughing:



btw all those are DDR2 and DDRs lol i have NO DDR3 anymore.....

so my 1366 isn't even running anymore

[Splave]

http://i.qkme.me/3595km.jpg


3 more chips to test today, fuck me this is getting boring...dont think I will get anymore after this

[kikicoco1334]

I don't date asians... and my family have never said that to me.....
hell, i never even hang out with asians....

we all know you'll end up getting more :rofl
hopping to get my Z77 and 3570 this weekend so i can put my stupid ass to work again.....
it's been too damn long...

[Vivi]

i only have

1 kit of team xtreem 2600 c10
1 kit of 2000 CL7 domz
2 kits of 2133 g.skills 7-11-7 on the way. Bought from gunslinger but im sure half the forum already had a go at them am i right splave??


and on another note, our suppliers only have Malay cpu's in stock :<. 14 L222's and L221's

[Splave]

^ ROFL yup ;)

[kikicoco1334]

i only have

1 kit of team xtreem 2600 c10
1 kit of 2000 CL7 domz
2 kits of 2133 g.skills 7-11-7 on the way. Bought from gunslinger but im sure half the forum already had a go at them am i right splave??


and on another note, our suppliers only have Malay cpu's in stock :<. 14 L222's and L221's

ONLY!

Dick! :D




Just got a new 1155 setup dropped off to me.

Gigabyte Z77 UD5H
i5 3570 (which no one in the team has clocked it yet)

now not sure what kind of RAM i should get....
i have a set of the PGV38G1600ELK which i am selling and 2 sticks of CMZ4GX3M1A1600C9B which he dropped it off cuz he can't get the damn thing to work :eek:

thinking about selling them both and maybe buying like a set of something MUCH better off some of y'all and call it the day..... :laughing:

[thebanik]

ONLY!

Dick! :D




Just got a new 1155 setup dropped off to me.

Gigabyte Z77 UD5H
i5 3570 (which no one in the team has clocked it yet)

now not sure what kind of RAM i should get....
i have a set of the PGV38G1600ELK which i am selling and 2 sticks of CMZ4GX3M1A1600C9B which he dropped it off cuz he can't get the damn thing to work :eek:

thinking about selling them both and maybe buying like a set of something MUCH better off some of y'all and call it the day..... :laughing:

Have tested the 3570K, was pretty worthless TBH, clocked to 5.8Ghz on LN2, I dont even know if anyone else has clocked anything less on 3570K, lol, hence never posted the scores, :D

[kikicoco1334]

Oh wow...
I think i monna just get a Dice score if i can find any around town and then sale the little sucker

but any thoughts on the board?

[kikicoco1334]

http://hwbot.org/hardware/chipset/z77/#start=0#interval=20
also been looking on the bot and not sure if this is a good thing or not but it has like the 3rd highest reference clock in the z77 family..

[Splave]

Have tested the 3570K, was pretty worthless TBH, clocked to 5.8Ghz on LN2, I dont even know if anyone else has clocked anything less on 3570K, lol, hence never posted the scores, :D

Im telling ya those psc sticks I sent are nice ;) 2500 8-12-9-28-88 should be quite easy!

[Splave]

I miss our team :(

[PhIlLy ChEeSe]

I may be digging out from under soon, if so I will have to move. But the job is right up my alley and the pay is right too......:)

[DOM]

I miss our team :(
i know :laughing: i messed with my new L221A996 but was about 6.4 m1 and 6.3 3D 4c :thumbdown:

and i might of killed it :ohcrap:
I may be digging out from under soon, if so I will have to move. But the job is right up my alley and the pay is right too......:) :clapping:

[PhIlLy ChEeSe]

i know :laughing: i messed with my new L221A996 but was about 6.4 m1 and 6.3 3D 4c :thumbdown:

and i might of killed it :ohcrap:
:clapping:
Anybody in the Chicago area?

[DOM]

MD JIMBOB :laughing:

and the cpu lives :P

[GFDuke]

I miss our team :(

Ya think? I'm on the verge of just cashing it all in. It's really not even any fun anymore for me.

[kikicoco1334]

wait...
what's going on now?

people are slowly coming back i am sure

[DOM]

Spalve how's dent and Rom been ?

Anyone heard anything from patch ?

[Splave]

dent and rom are doing dent work together I think they are in Oklahoma right now. Patch texted me a couple months ago asking if I though MOA was worth a shot be he decided it was not.

[kikicoco1334]

dent and rom are doing dent work together I think they are in Oklahoma right now. Patch texted me a couple months ago asking if I though MOA was worth a shot be he decided it was not.

that's really good to hear they are all just slacking on the benching and but working lots :thumbsup:

kinda miss everyone tho, those good'o time with me spamming the dirtiness with MD around forums while everyone is benching and having a good time.

i am sure everyone will be coming back when they got a little more time and funding and life and some other good stuff......
or we can start training the next gen to becoming like us :rofl:

Hell DOMass have 3 already. we are kinda screwed...

[MaadDaawg]

Ya think? I'm on the verge of just cashing it all in. It's really not even any fun anymore for me.

WOW... it's not only me :thumbsup: Those thoughts been going through my head the past few weeks.... where's the comraderie? where's the team spirit?? I've been wondering if there was some secret forum I wasn't privy to cause no one has been posting on this one for awhile :thumbdown:

Where is everone?

[Kal-EL]

I can see in the dark...

[MaadDaawg]

:rofl:

[GFDuke]

I can see in the dark...

Thats cause you're Superman. We are just human.

[DOM]

i would be ocing right now but making the wife a cookout for her bday :P and having some family over and might get fucked up unless we run out of alcohol :laughing:

but got the dewar filled for tomorrow :D

[GFDuke]

Sweet!!!

Happy Birthday Momma!!

[Mr.Scott]

WOW... it's not only me :thumbsup: Those thoughts been going through my head the past few weeks.... where's the comraderie? where's the team spirit?? I've been wondering if there was some secret forum I wasn't privy to cause no one has been posting on this one for awhile :thumbdown:

Where is everone?
Could always merge with my team. lol
We just broke into the top 20.
You want camaraderie and team spirit, that's how we roll. ;)

[Kal-EL]

Could always merge with my team. lol
We just broke into the top 20.
You want camaraderie and team spirit, that's how we roll. ;)
YEAH, I saw that yesterday and thought "Alright, good job CP, way to hang in there against the jacktard odds".

They finished pouring the slab on my extension, gotta save every penny till its done :thumbdown:

[Mr.Scott]

YEAH, I saw that yesterday and thought "Alright, good job CP, way to hang in there against the jacktard odds".


Keep it fun. No pressure to produce results. It's working for our small team.;)
As always, we appreciate all OCA's support.:)

[GFDuke]

lol HWBot is a joke for teams like ours. Personal goals are good to set. When saying i miss our team i mean showing up in the forums. Letting us know you're ok. Still being a part of the team. Benching or not. Ya know what i mean?

[kikicoco1334]

I've been here trolling!
Haven't done much in the last year or so but been here trolling XD

Getting ready to pick up a 22in Asus Screen (VW224U) hope it's a good one, since i been benching off 15in square screens lol PMed him and he was asking 90+shipping from PA to TN, really hopping the shipping isn't too too bad

Edit: or the E2250SWD

I've been out for too long tbh, I was never that good in the first place (recently i found out i have been learning from a shitbird who talks out of his ass this whole time), and left my bench rig hanging for close to a year is making me prob have to relearn everything i "know" about benches...

oh and my dewar has been dry for like almost a year now too! last time i had it filled it was still getting cold last year :thumbdown:

Luckily like i said previously, i picked up a GA-Z77-UD5H and a 3570k on air i got it to x45 with 1.20/1.25v can't remember which was which... :Dizzy: (been learning about history this summer my brain is all jacked up :scared:)



WOW... it's not only me :thumbsup: Those thoughts been going through my head the past few weeks.... where's the comraderie? where's the team spirit?? I've been wondering if there was some secret forum I wasn't privy to cause no one has been posting on this one for awhile :thumbdown:

Where is everone?

It's a secret thing and your invite got lost in the mail :ohcrap:



i would be ocing right now but making the wife a cookout for her bday :P and having some family over and might get fucked up unless we run out of alcohol :laughing:

but got the dewar filled for tomorrow :D

You don't drink DOM! your definition of drinking is pretty much 1 beer and calling the night :D



Could always merge with my team. lol
We just broke into the top 20.
You want camaraderie and team spirit, that's how we roll. ;)

Congrats bro!

[thebanik]

After my pathetic try at MOA which took a lot of my time with family, wife has banned me from using my desktop for 1 month, :P

[kikicoco1334]

After my pathetic try at MOA which took a lot of my time with family, wife has banned me from using my desktop for 1 month, :P
WTF? they can do that? :D

I am gonna ask this one girl out tomorrow night, but now i am rethinking about it :ohcrap:
gonna need some luck on this one :rofl

[DOM]

After my pathetic try at MOA which took a lot of my time with family, wife has banned me from using my desktop for 1 month, :P
:ohcrap:



JUST DID SOME 3D 8800GT'S ONLY GOOD THING I GOT GOLD IN 05 WITH STOCK CARDS :laughing:

[thebanik]

WTF? they can do that? :D

I am gonna ask this one girl out tomorrow night, but now i am rethinking about it :ohcrap:
gonna need some luck on this one :rofl

Get married and you will know, :P

My wife(then gf) is/was a sports/physical education teacher and an International Basketball player for India, I thought wow great, she will understand my computer gaming addiction(hobby). Sadly she didnt, was the captain of the best Indian TF2 team which I had to disband because of her (For her it was as usual a mature guy playing a stupid game, spending all the time in front of the computer) Though I understand her POV as well, so no friction as such. And leaving gaming gave me a bit more time to overclocking actually, :D

[kikicoco1334]

:rofl
marriage is nice but it's not for everyone XD

[Vivi]

^ ROFL yup ;)

in the end they were decent enough for me :)!

memory ln2 -78 2.05v

http://hwbot.org/image/821616.jpg

splave pot
http://hwbot.org/image/821615.jpg

[kikicoco1334]

nice board dude!

[MaadDaawg]

lol HWBot is a joke for teams like ours. Personal goals are good to set. When saying i miss our team i mean showing up in the forums. Letting us know you're ok. Still being a part of the team. Benching or not. Ya know what i mean?

Ditto

[MaadDaawg]

WTF? they can do that? :D

I am gonna ask this one girl out tomorrow night, but now i am rethinking about it :ohcrap:
gonna need some luck on this one :rofl

Kiki, since you have to hand them your balls as part of the wedding ceremony, they can pretty much what they damn well please, and you ain't gonna say shit cuase you want your balls back SOMEDAY :laughing:

Usually they are returned either by the undertaker or the judge of the divorce courts. :rofl:

[Witchdoctor]

lol HWBot is a joke for teams like ours. Personal goals are good to set. When saying i miss our team i mean showing up in the forums. Letting us know you're ok. Still being a part of the team. Benching or not. Ya know what i mean?

yea I have not been around much due to a few things, just bought a house so have been busy working on it as I am not only finacing I have to do all the work too ........ :ohcrap:

The lack of traffic here is another one, still check in from time to time, but TBH it seems like not as many stop into say hi now adays, As Duke said just to say hello and let us know your alive would be cool.

The new rules at the bot really work against a team such as our who's members are mostly cutting edge, allowing only one score from each peice of hardware is tough on us when 10 or 15 of us are benching latest and greatest and typically held several spots on the top ten or twenty harwared groups , That's when we were dominant

It is what it is and it seems like many have said eff the new bot ..... I am not ready to throw in the towel yet but between the new house renovation and and College tuition for my son my benching budget has been reduced significantly, What is even more effed up is now they are talking about disqualifing one of the best Z77 boards out there

Last but not least Ln2 is the minimum requirement and a ton of fun but here I pay $ 2.25 a liter ........... :shock:

All I can say to all you absent members is stop in and say hello, no one cares if it is about benching or just saying hello, pulling a no show is rude IMO. Take the 5 minutes

And what the hell happened to the T-Shirts .......... :Dizzy:

So here I am stopping to to say hello and hope to be back in the game on time for the 780 release. So all you binners out there don't be surprised if you see me in your PM box looking for a half decent second hand chip .............. :)

[kikicoco1334]

Kiki, since you have to hand them your balls as part of the wedding ceremony, they can pretty much what they damn well please, and you ain't gonna say shit cuase you want your balls back SOMEDAY :laughing:

Usually they are returned either by the undertaker or the judge of the divorce courts. :rofl:

we spent like 8hrs together hanging out and doing calculus, she is an artist work with medals, she is not gonna get it! and she was kinda mad about it and i told her she is a pretty girl and she is not supposed to get it (or something sweet like that...). apparently i DID NOT have enough balls to ask her last night...
in the end her stp dad stepped in and started to help me out XD

but yeah i know what you mean jim, my ex what ever... dear god! last asian i am ever dating that's for damn sure! :D

[kikicoco1334]

yea I have not been around much due to a few things, just bought a house so have been busy working on it as I am not only finacing I have to do all the work too ........ :ohcrap:

The lack of traffic here is another one, still check in from time to time, but TBH it seems like not as many stop into say hi now adays, As Duke said just to say hello and let us know your alive would be cool.

The new rules at the bot really work against a team such as our who's members are mostly cutting edge, allowing only one score from each peice of hardware is tough on us when 10 or 15 of us are benching latest and greatest and typically held several spots on the top ten or twenty harwared groups , That's when we were dominant

It is what it is and it seems like many have said eff the new bot ..... I am not ready to throw in the towel yet but between the new house renovation and and College tuition for my son my benching budget has been reduced significantly, What is even more effed up is now they are talking about disqualifing one of the best Z77 boards out there

Last but not least Ln2 is the minimum requirement and a ton of fun but here I pay $ 2.25 a liter ........... :shock:

All I can say to all you absent members is stop in and say hello, no one cares if it is about benching or just saying hello, pulling a no show is rude IMO. Take the 5 minutes

And what the hell happened to the T-Shirts .......... :Dizzy:

So here I am stopping to to say hello and hope to be back in the game on time for the 780 release. So all you binners out there don't be surprised if you see me in your PM box looking for a half decent second hand chip .............. :)

Well WD i am glad you are doing good, and keeping yourself busy. glad you can stop by :Hi:

LN2 can be really $$$ too hehehe

[GFDuke]

Your post is on spot WD. I feel we are not only a benching team here but brothers in a family of great people. Theres no need for abandonment. Even though we are somtimes a thousand miles apart we are still a big part of each others lives. To all of the no shows...we miss you.

As far as the bot is concerned they are becoming the victim of their own demise and will someday not exist because of their petty rules. I would love to see Asus come up with some sort of online benching forum. They would put HWBot to shame i am sure. But the chances of that are slim since like other manufacturers they too are concerned about the bottom line at the end of the day.

[Kal-EL]

What happened to the damned t-shirts???????? :ohcrap:
Rogue! :keeporder:


Hey is this a dating forum, love shack, or overclocking thread?

[Splave]

Your post is on spot WD. I feel we are not only a benching team here but brothers in a family of great people. Theres no need for abandonment. Even though we are somtimes a thousand miles apart we are still a big part of each others lives. To all of the no shows...we miss you.

As far as the bot is concerned they are becoming the victim of their own demise and will someday not exist because of their petty rules. I would love to see Asus come up with some sort of online benching forum. They would put HWBot to shame i am sure. But the chances of that are slim since like other manufacturers they too are concerned about the bottom line at the end of the day.

IMO when at asus they didnt care that much about being #1 on hwbot but Peter was hell bent on making sure he was first on the ORB for each of the three classes.

I wouldnt mind seeing a competitor but it would be hared to be a manufacturer and run one...do you only allow your own stuff? how do you explain that to the corporate heads that you want 10's of thousand of dollars to develop a website where your competitors can post as well.

The key is bench for fun, Ive had more fun benching ivy at 5ghz and freezing mem for 32m then I have in a while benching anything.

[Witchdoctor]

What for pot are you using to freeze your memory

[Splave]

dominance king pin pot :D

[Witchdoctor]

hmmm........ though that just fit Doms ??? or are you freezing doms , thought their would be one more universal or are you just rigging it on what ever set ?

[Splave]

I use these
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=294&products_id=33659&zenid=6e1e81f7222fbdda4826c454802c9986

just need to make sure you have a flat top on the mem heatsinks, the ln2 does the rest :)

[Witchdoctor]

:good:

got it

[crio]

With too litle thermal paste, 2 lts of LN2 and bad contact with the pot i got this...

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6444&stc=1&d=1343772037

I can do 1M there too but fail in the screenshot....Gonna have to refill LN2 and give it a proper try...

[kikicoco1334]

DUDE! that's amazing! for limited LN2 and no thermal XD

[Splave]

With too litle thermal paste, 2 lts of LN2 and bad contact with the pot i got this...

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6444&stc=1&d=1343772037

I can do 1M there too but fail in the screenshot....Gonna have to refill LN2 and give it a proper try...

you need m5e of m5f for slow mode switch, run bench flip slow mode on open cpu-z's then slow mode switch off and capture :thumbsup: nice chip!

[kikicoco1334]

Funny story of the day.
While I was benching a friend came over and wanna do some Dice, well he didn't have a board at the time so i let him used the P5Q Deluxe i had just laying around. He didn't know you had to insulate the damn thing and i minding my own Commando the board was K.I.A that night.

time goes by, and i pretty much forgot i even had that...

ONE year later today, I decided to clean my room and put all the broken parts up in the storage and found the box for this board, and decided to test it out for no reason and it booted it right up XD

not sure about other parts of tennessee, but in nashville - brentwood area it's been 90~110F since June 25th, seems like the heat baked my P5Q Deluxe alive :rofl

[DOM]

Okay any one know why my 580 light can't bench past 1000mhz on ln2 with out getting crappy fps I always didn't know why aq3 always sucked but found out that was why...

[Splave]

all the switches on?

[DOM]

are they supposed to be on or off ?

I'm not even sure where mine are at cuz its been sitting there since the last time I ran it on ln2

I think I moved them but idk which way lol

[Splave]

should all be on

[crio]

Dropping this here for now....

CPU-Z Validator 3.1 (http://valid.canardpc.com/show_oc.php?id=2459733) http://valid.canardpc.com/cache/screenshot/2459733.png

[crio]

DP ..... needed

Untweaked runs, just checking clocks

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6445&stc=1&d=1343921434

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6446&stc=1&d=1343921434

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6447&stc=1&d=1343921434

[Splave]

very nice!

[Witchdoctor]

Sick crio

[thebanik]

Very good chip there crio.......:D

[Splave]

anyone else have old ram to submit to this comp :D

http://hwbot.org/competition/team_cup_2012_sc3/stage/629_ddr3_sdram

strong imc on this chip and frozen psc pi's
http://valid.canardpc.com/show_oc.php?id=2459972

[kikicoco1334]

wow dude! that's crazy!

oh and i am working on the gigabyte low clock thing
(really hope i don't make a fool out of myself in it, since the lowest mem speed i've seen in that is like 2000~2100mhz @ CL9 lol)

[GFDuke]

[QUOTE=Splave;93376]anyone else have old ram to submit to this comp :D

http://hwbot.org/competition/team_cup_2012_sc3/stage/629_ddr3_sdram

What are you looking for? I have some old ddr2. I might even have some ddr here. idk what you're looking for.

[Splave]

I meant for someone else to bench and get in on the action :D I dont have any boards older then ddr3

[Mr.Scott]

anyone else have old ram to submit to this comp :D



I have all of them.;)

[GFDuke]

I have all of them.;)

I sure of that. But you're not on our team. lol

[Mr.Scott]

I sure of that. But you're not on our team. lol
That doesn't mean you can't help a buddy out.;)
Also, none of you guys do old tech. So even if you have the equipment, chances are somebody on my team will get by you.:D

[Patch]

Hi.

Time to post in the love shack/dating forum/oc thread.

Haven't benched this year and prolly won't in the future. It was a blast, especially the away competitions with team mates, but it was getting to the point where I would have had to seriously step up the time commitment to take it further. And I was already spending too much time away from the family.

So now I'm hanging out more with the wife and kids. Got a dog. Getting in shape. And using the $20K/year hardware budget I was blowing on a new hobby with much better resale value - original art. Really looking forward to the painting I commissioned from Julie Bell. :)

Keep ripping it up guys! And if anybody finds themselves near San Francisco and wants Elano's old dual stage Cascade for cheap, let me know.

[kikicoco1334]

omg it's pat, it's good to seeing ya bud

glad you are doing well with life

[Kal-EL]

Hi.

Time to post in the love shack/dating forum/oc thread.

Haven't benched this year and prolly won't in the future. It was a blast, especially the away competitions with team mates, but it was getting to the point where I would have had to seriously step up the time commitment to take it further. And I was already spending too much time away from the family.

So now I'm hanging out more with the wife and kids. Got a dog. Getting in shape. And using the $20K/year hardware budget I was blowing on a new hobby with much better resale value - original art. Really looking forward to the painting I commissioned from Julie Bell. :)

Keep ripping it up guys! And if anybody finds themselves near San Francisco and wants Elano's old dual stage Cascade for cheap, let me know.
Hey hey hey :D
Nice hearing from yah Patch :good: can't argue with that re-allocation of personal time and money but don't be a stranger! Stop by once in a while to see what kikicoco does next in his personal life or see the great sexual predator advice by Maaadaaawg.

I'll be back in the bench scene soon as construction is done on the new extension here. I'm gonna slip into the 2nd/3rd recent generation hardware arena to stave off the 20k a year budget requirements of bleeding edge overclocking and focus on crusty scab overclocking :blush: instead.

I'll slip "Retired Legend" into your user title :taunt:

[kikicoco1334]

Hey hey hey :D
Nice hearing from yah Patch :good: can't argue with that re-allocation of personal time and money but don't be a stranger! Stop by once in a while to see what kikicoco does next in his personal life or see the great sexual predator advice by Maaadaaawg.

I'll be back in the bench scene soon as construction is done on the new extension here. I'm gonna slip into the 2nd/3rd recent generation hardware arena to stave off the 20k a year budget requirements of bleeding edge overclocking and focus on crusty scab overclocking :blush: instead.

I'll slip "Retired Legend" into your user title :taunt:

OMG hahahaha :rofl: omg superman you are the best!

[Bones]

That doesn't mean you can't help a buddy out.;)
Also, none of you guys do old tech. So even if you have the equipment, chances are somebody on my team will get by you.:D

All I can add to that is stay away from Socket 754 - Or you'll get :owned2: :D

Seriously, the older stuff is kinda fun and cheap to get IF you know where to look. Here's a site I've got some of my "Older" chips from.

http://www.starmicroinc.net/

Just be sure to read the descriptions carefully and also watch those prices, some are really good, some are really crazy, stay away from the crazy deals and you'll be OK.

[kikicoco1334]

I have no access to the camera right now, but i'll take a picture of what i got the other day XD
it's a ebay thing and it was like 35 shipped and it contains 81 different 775 chips i've always been a 775 fan (not saying i am any good at it) out of those 81 chips there is a few doa but also found a few chips i may beable to hit a better score than what i already have :D

[GFDuke]

Good to hear from you Patch. Good luck with you new hobby.

[Witchdoctor]

Good to here from you Patch, hope the future takes you where you are going, have fun enjoy life and stop in every now and then.............. :thumbsup:

[OC Maximus]

I miss our team :(

Me too brotha, me too...

[kikicoco1334]

how many more years to go?
it's been so long, i lost track of time

[crio]

Better efficiency

http://www.hwbox.gr/attachments/hwbot-scores/7544d1344696253-hwbot-superpi-1m-ranking-snaphsot0001.jpg

[Kal-EL]

Wow, thats pretty kick ass crio, nice work :)

[crio]

Can and will do better...But i have to find better ram first.

[kikicoco1334]

saw that on facebook bud! nicely done!

[kikicoco1334]

long story short, got sick of dealing with 1600mhz C9 stuff and picked up a pair of the cmt8gx3m2b2133c9 with the fan and everything and according to i4memory it may have some kind of samsung IC in it.
right now @ 45x with the 3570k + 2400mhz 9-13-12-28 @ 1.75v ran 32M for 7min22sec with no tweak and newly installed 7/64 no SP1

now working on reinstalling 7/64 SP1 simp chinese


http://hwbot.org/competition/gbt_classic_challenge/stage/690_superpi-32m_4.5g_low-clock/

[Splave]

nice! they scale up to 1.9v :D keep rocking man :)

[kikicoco1334]

will do boss! cant get windows to load to save my own life lol

and i was thinking if i kill it i killed it what ever XD
RMA is a thing

[kikicoco1334]

been benching for 7hrs, not so sure if it's win or fail.

3570k @ 4500MHz with Thermalright VX
CMT8GX3M2B2133C9 @ 2400MHz @ 9-11-11-21 1T @ 1.80v (kinda went full retarded on that and just so i know i am not short on voltage :P) <- not sure if it's a stupid move or not
Gigabyte Z77-UD5P board

should i lower the speed on the ram to 2200 and make the timming like extremely low?
this thing will not boot at 107x43

http://d1ebmxcfh8bf9c.cloudfront.net/u25174/image_id_828697.jpeg

[DOM]

Ewww you went with a gigbutt :laughing:

Are those samsung ? Seems close to my teamgroup on the xmp @2133

You shouldn't need 1.8 maybe like 1.65-1.7 for 2400

[Splave]

keep those timings and jump to 2600mem 100x45 :thumbsup: they wont go much tighter even at lower frequency

[kikicoco1334]

rg that!
as far as i can tell they are samsung but not sure and can't seem to get those sexy heatsink off

[punx223]

rg that!
as far as i can tell they are samsung but not sure and can't seem to get those sexy heatsink off

I wouldnt try too hard some are sealed on there well and I have borked a few sticks ripping spreaders off lol..

nice running Tu fu

[kikicoco1334]

i'll stop then.
hope i didn't kill one of my stick already XD (think i already did lol)

OCA i've failed you again...
http://d1ebmxcfh8bf9c.cloudfront.net/u25174/image_id_828956.jpeg

[Splave]

failed because you didnt use mem tab? lol

[kikicoco1334]

sigh....

[punx223]

did a lil benching today :)

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6448&stc=1&d=1345174951

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6449&stc=1&d=1345174951

and not bad valid for full 4C8T :)

http://valid.canardpc.com/show_oc.php?id=2478769

[Witchdoctor]

Nice work ............. :thumbsup:

[Splave]

nice man, pifast is not valid though sorry :( error in computation

[DOM]

this is all i have i done :blush:

http://hwbot.org/submission/2307386_domoca_memory_clock_ddr3_sdram_1530.5_mhz

[Splave]

not bad man :)

[punx223]

nice man, pifast is not valid though sorry :( error in computation

shit I didnt even notice ?!?!

fuck fuck fuck

[punx223]

any idea why pifast hates me? lol

[kikicoco1334]

this is all i have i done :blush:

http://hwbot.org/submission/2307386_domoca_memory_clock_ddr3_sdram_1530.5_mhz

piss off DOMass! no one gives a shit about you! :D

[kikicoco1334]

any idea why pifast hates me? lol
happens to the best of us bro!

spi hates me so it's all good!

[DOM]

piss off DOMass! no one gives a shit about you! :D
:this:


any idea why pifast hates me? lol

its not stable enough try turing off HT ;)

[PhIlLy ChEeSe]

shit I didnt even notice ?!?!

fuck fuck fuck

Drive it like u stole it man!

[kikicoco1334]

phil! nice to see you around bud!

[PhIlLy ChEeSe]

phil! nice to see you around bud!
Thanks man! Im here mentally...........:)


Im back in NY the unemployment state:)!

[kikicoco1334]

Thanks man! Im here mentally...........:)


Im back in NY the unemployment state:)!
ouch!
well time will get better soon i hope

[PhIlLy ChEeSe]

ouch!
well time will get better soon i hope
It will, just miss over clocking. Im no world record setter but, I love tinkering with stuff.......
For now Im in troll status :)

[kikicoco1334]

meh, i been trolling for a year now it's about time for me to bring my lazy ass back in the game