May (insert funny pun here) bench thread

[Splave]

I'll start

1.55v +400 passes at -50c not possible to go higher on this card at that temperature. Dreaded red screen of death, get checker board pixels patern as well when trying over 1525.

http://i.imgur.com/nWunf.jpg

http://i.imgur.com/s12GL.jpg

http://3dmark.com/3dm11/3320417


sucks donkey ballz on ln2 -50c reminds me of gtx-580 reference CB :thumbdown:

[DOM]

I'm not having so much luck with the mvg XD getting mouse lag from hell

[Splave]

turns out I didnt do the CB mod lol oops will try again tomorrow

[BenchZowner]

And I was like "wtf is he saying, he can't have such a crappy card" :D

[DOM]

turns out I didnt do the CB mod lol oops will try again tomorrow

That's what happens when you been MIA for so long :laughing:

[DOM]

good news i got it to work after about 3 hrs :blush:

mouse needs to be in the usb3.0 and need to enable EHCI hand off :wtfsign:

[Neuromancer]

That is weird EHCI is usb 2.0 XHCI is usb 3.0

[DOM]

A new bios fixed it 0881 I think it is

Max cpu-z I got was 5.7 on the SS @ -54c evap temp
Ran super pi 1m but wasn't wprime stable it would reboot

[BenchZowner]

Sounds about right.
These chips really love cold.

[DOM]

well ill be picking some up later today :D

[Splave]

sweeeeet!
Is it malay or Costa?

GTX-680 is out of the equation, dont think epower and evbot will make it in time.
http://i.imgur.com/Knt3x.jpg


Reference 7970 pulling 1200mhz 1.2v in 3dmark11 so far on stock cooler. Seems promising. Saving big scores till the end ;)

[DOM]

I didn't even check does it matter ? LOL

I'll check when I get home

[Neuromancer]

Nice P-score. OCed 680= almost as good as two 580 superclocks stock :O (I got 14K Pscore IIRC)

[Splave]

Plenty of MGH-E BBSE and PSC to bin ;)
This is only part of it.

http://i.imgur.com/OJAqK.jpg

random sets of trident 2000 9-9-9
3x2gb Perfect storm 2000 8-8-8
8x2gb RipX 1600 6-8-6

[Splave]

Behold the power of BBSE lmao

4x2gb BBSE 1.71v 8-10-8 2200mhz
http://i.imgur.com/RFFCO.png

4x2gb Dom 1.77v 7-8-7 1866mhz
http://i.imgur.com/Knt3x.jpg


BBSE run = almost the same physics score at 450mhz less. There is a balance of frequency of timings necessary for a good run.Although tRCD does not seem to matter if at all

[MaadDaawg]

Plenty of MGH-E BBSE and PSC to bin ;)
This is only part of it.

http://i.imgur.com/OJAqK.jpg

random sets of trident 2000 9-9-9
3x2gb Perfect storm 2000 8-8-8
8x2gb RipX 1600 6-8-6

Where the hell did you find all those perfect storms :eek: them thar are some nice sticks :D

[Splave]

trades and ebay :) paid $50 for 3x2gb tridents

[DOM]

Okay it has begun :D

would post a pic but don't think I can off my phone :P

[BenchZowner]

Sounds good :D

[DOM]

Hd is died...... pullhair

[Splave]

rofl

[DOM]

It's not funny damit :laughing:

Was getting the pot cooled down to -90c

Powered it up hd was gone and turned off the delta fan picked it up pos wasnt even spinning, restarted click click click stops

I was about to stomp in it but think I can still rma it :P

And my old hd from a dell I used to use for benching was dead but now it works :)

Well time to get to work before I have to leave to work :(

[Splave]

hit 2450mhz 8-12-9-24-88 1.77v 17.3k at 5ghz ;)

[DOM]

6042 1.7v 4c so far

eat it Allen :rofl

Okay update 1.7 6254 :cool3:

[punx223]

6042 1.7v 4c so far

eat it Allen :rofl

Okay update 1.7 6254 :cool3:

did the jumper help?

[BenchZowner]

Hd is died...... pullhair
Had that happen in a live event in the past.
It actually went up in flames, we were inspecting the VGA's & mobos trying to find a burnt PWM or a blown cap and after a full 3 or so minutes we noticed the flaming red HDD :D

I see 6.2GHz+, that's not bad for your first (?) retail chip.
Hope it scales much higher with more than 1.7Vcore, work your magic :)

[DOM]

did the jumper help? yes sir :thumbsup: no cb

Had that happen in a live event in the past.
It actually went up in flames, we were inspecting the VGA's & mobos trying to find a burnt PWM or a blown cap and after a full 3 or so minutes we noticed the flaming red HDD :D

I see 6.2GHz+, that's not bad for your first (?) retail chip.
Hope it scales much higher with more than 1.7Vcore, work your magic :)
Yes first chip

I'm at 6572 1.85 :D

[BenchZowner]

Awesomesauce material !

[punx223]

yes sir :thumbsup: no cb



Sickness :)

what about settings?

[GFDuke]

Sounds like the old celeron days. I have work to do for world domination before i can have that much fun. looool

[Splave]

LOOL we have our old golden hand, DOM

[DOM]

http://valid.canardpc.com/show_oc.php?id=2355728

bot is to slow and im late enjoy :D

[Neuromancer]

trades and ebay :) paid $50 for 3x2gb tridents

Saw a 1600 7-7-7 triple channel kit for $35 yesterday. wanted to poke the dude in the eye.


I told you guys months ago to look for triple channel kits cuz morons would be selling them cheap. listen to me NOOOO

what does drunk richie know...

apparently more than your sober asses

[BenchZowner]

MGH-Es are still the king ;)

[DOM]

Idk how to clock mez ramz lol

[Splave]

nice chip dom, I had to delete your pifast though because you submitted it wrong lol put 5.5 second pifast WR ;) when it was your superpi score

dropped a bomb in contest
http://hwbot.org/submission/2280310_splave_3dmark03_radeon_hd_7970_200014_mark s

[DOM]

I thought i deleted it lol im falling asleep

nice 03 i would like to see that on ivy :)

[Splave]

I would too ;) maybe next week when I sell off x79 chips etc

[DOM]

now i need to see what kind of 3d scores i can get... but i need a bigger hd now :laughing:

[punx223]

very nice DOM, and nicely done splavester :thumbsup:

[MaadDaawg]

DOM.. no 7Ghz YET :wtfsign:

Awesome work you too :D

[Kal-EL]

Nice work guys, awesome! :)
Kudos DOM! :D

[PhIlLy ChEeSe]

http://valid.canardpc.com/show_oc.php?id=2355728

bot is to slow and im late enjoy :D

Holly shit look at them volts! 1.856! :blink:

[punx223]

Holly shit look at them volts! 1.856! :blink:

need almost 2.0V to break 6.9+ on some of these chips.... O.o

[DOM]

Round 2 is about to start hope nothing else dies XD

[Splave]

http://hwbot.org/submission/2280815_splave_3dmark11___performance_radeon_hd_79 70_14665_marks?recalculate=true

:) great success, Backup posted in MOA hidden thread

[DOM]

NICE when you going to oc the CPU more ?

just got this 1c 1.9v :scared:

http://hwbot.org/submission/2280820_

[BenchZowner]

Bot is... unresponsive at the moment.
Break it to us gently....

6.8GHz Pi 1m ?

[DOM]

I wish lol 6659 pi1 :(

[DOM]

GOT SILVER IN WPRIME :P

http://hwbot.org/submission/2280860_domoca_wprime_1024m_core_i7_3770k_114sec_7 50ms

http://hwbot.org/submission/2280836_domoca_wprime_32m_core_i7_3770k_3sec_609ms

http://hwbot.org/submission/2280823_domoca_superpi_core_i7_3770k_5sec_421ms

http://hwbot.org/submission/2280822_domoca_pifast_core_i7_3770k_10.84_sec

[thebanik]

GOT SILVER IN WPRIME :P

http://hwbot.org/submission/2280860_domoca_wprime_1024m_core_i7_3770k_114sec_7 50ms

http://hwbot.org/submission/2280836_domoca_wprime_32m_core_i7_3770k_3sec_609ms

http://hwbot.org/submission/2280823_domoca_superpi_core_i7_3770k_5sec_421ms

http://hwbot.org/submission/2280822_domoca_pifast_core_i7_3770k_10.84_sec

Mindblowing DOM, awesome.....Congrats.....:D

[DOM]

THANKS

580 3DM01 :eek:

http://hwbot.org/submission/2280876_domoca_3dmark2001_se_geforce_gtx_580_13715 3_marks?recalculate=true

WOULD OF RAN MORE BUT WIFE IS MAD WHERE LATE FOR THE BDAY PARTY :ohcrap:

[Splave]

GJ dom dom!

[punx223]

nice job bro :)

[GFDuke]

THANKS

580 3DM01 :eek:

http://hwbot.org/submission/2280876_domoca_3dmark2001_se_geforce_gtx_580_13715 3_marks?recalculate=true

WOULD OF RAN MORE BUT WIFE IS MAD WHERE LATE FOR THE BDAY PARTY :ohcrap:

LMAO Dumbass. Keep her happy if ya wanna bench more. :rofl

[DOM]

:rofl

Where already here its a lil warm outside:P

[PhIlLy ChEeSe]

Mindblowing DOM, awesome.....Congrats.....:D


Great work man!! :thumbsup:

[DOM]

Thanks guys

Well I'm out of juice :P wish I lived near duke to use up his haha

Well something else died :rroulette:

[punx223]

what dies now?

[BenchZowner]

Hopefully his mouse

[punx223]

lol would probably be least problematic part O.o

[GFDuke]

Thanks guys

Well I'm out of juice :P wish I lived near duke to use up his haha

Well something else died :rroulette:

I only have 200L left bud. Sorry i'm gonna need it for superpi 32 and 03. :rofl

[DOM]

U suck duke :this: LOL.....

Another hd is dead :Dizzy:

Now I have to rma x2 1.5tb seagates, 2600k, gigbutt mb

How do you check if hd still have warranty on the hds?

[Splave]

as long as its not the 3770k kill everything for all we are concerned ;)

[DOM]

as long as its not the 3770k kill everything for all we are concerned ;)
:laughing:

only good thing it was my 5.6 not the 5.8 one :P

but idk so much crap has been going wrong

i tryed to get a 01 run at 6.5 it bsod on nature cuz i ran out of juice, but it would of passed easy.....

i was hoping for 140k+ :eek:

[Splave]

sick! I cant wait to join the fight

thanks for making me order one asshole ;)

[GFDuke]

Sorry wrong thread. :(

[DOM]

sick! I cant wait to join the fight

thanks for making me order one asshole ;)
:rofl

is there still a one limit ? i was going to get two but doesnt seem i need one right now :D

[Splave]

got one off ebay sealed :) L206A973 we'll see what happens

[DOM]

Mines is L204B259

[Splave]

All i have heard is costa rica mem controllers arent as strong, you have malay me too.

batch probably doesnt mean shit just like sandy

[DOM]

Yeah seen some on the bot have the same batch but didnt oc the same

I want to get some ln2 monday but think ill wait till thursday or friday I need a break need to do a lot of rma's lol

[thebanik]

thanks for making me order one asshole ;)

you ordered one asshole for yourself??? :laughing::laughing::clapping::clapping:

[Splave]

its a spare ;)

[punx223]

all my chips are malay.... the Costa rica chip i had was first one to die....

coincidence? maybe... :ohcrap:

[DOM]

go get ln2 or go to sleep hmmmmm

[punx223]

go get ln2 or go to sleep hmmmmm

LN2

[DOM]

LN2

:thumbsup:

Got a nap in until my lil cow smacked me on the face lol

[MaadDaawg]

U suck duke :this: LOL.....

Another hd is dead :Dizzy:

Now I have to rma x2 1.5tb seagates, 2600k, gigbutt mb

How do you check if hd still have warranty on the hds?

WTF you buying Seagates for if not for the joys of RMA :laughing:

[Splave]

messing around this morning on SS not a bad board at all

http://valid.canardpc.com/show_oc.php?id=2362159

[punx223]

messing around this morning on SS not a bad board at all

http://valid.canardpc.com/show_oc.php?id=2362159

damn Im glad they fixed the BIOS....

when I first used that board getting it past 50X required saving 1x multi at a time and rebooting and move up 1 and reboot over and over....

[GFDuke]

For Dom.

[Splave]

damn Im glad they fixed the BIOS....

when I first used that board getting it past 50X required saving 1x multi at a time and rebooting and move up 1 and reboot over and over....

yeah dude I quite like this board, way easier to setup than RIVE :shock: I feel like I need to go back to school before I can bench that.


@ duke : PWND :laughing:

[GFDuke]

idk. I can't wait to get back on my Maximus IV with this 2500K. These MSI boards have me all screwed up. lol After about 3hrs my head is spinning.

[DOM]

WTF you buying Seagates for if not for the joys of RMA :laughing:

LOL they lasted a while never had any trouble with them.... I need to hurry and do the rma cuz ones furnishes next month and other is in Dec :ohcrap:

And that's not cool duke :this: lmao

I got mine filled today but wish I had a 230L mine like the 35L on the right :P

got 3hrs till work so ill just wait :picmonster:

[punx223]

yeah dude I quite like this board, way easier to setup than RIVE :shock: I feel like I need to go back to school before I can bench that.


@ duke : PWND :laughing:

dude I love my RIVE and MVG memory tweaking is awesome...

I got rid of the GD65 (8D) because of BIOS problems :( now I wish i could test it again with a proper working BIOS

[Splave]

idk. I can't wait to get back on my Maximus IV with this 2500K. These MSI boards have me all screwed up. lol After about 3hrs my head is spinning.

I will give you that, z68 is not very good, I always had 75% full pucker of my asshole from fear of it possibly harming my chip :Hi:

[punx223]

I will give you that, z68 is not very good, I always had 75% full pucker of my asshole from fear of it possibly harming my chip :Hi:

and epic post of the day goes to!!!

[GFDuke]

Oh god lmfao

[DOM]

I will give you that, z68 is not very good, I always had 75% full pucker of my asshole from fear of it possibly harming my chip :Hi:
:tg: :happy3:

[PhIlLy ChEeSe]

That one is going in the signature :thumbsup:

[Splave]

rofl

ln2 this morning, hitting 11 and if it goes either really well or really poorly will do some vantage runs.

PS: cheapest BBSE that is any good
http://www.ebay.com/sch/i.html?_nkw=avexir+blitz&_sacat=0&_odkw=avexir+bltiz&_osacat=0&_from=R40

[DOM]

okay so far i gotten a 5m23sec pie 32 with out wazza cuz i hate it lol

and 144k on 01 580 cpu 6.5ghz :D

[Splave]

thats sick, come up to NY and we will run wazza ;)

prepped 8800gt 512mb for epower testing, waiting on thick wires had to order online :X
http://i.imgur.com/NXCHw.jpg

[DOM]

i cant see the 8800gt lol

your going to love ivy just got gold in 05 :rofl

ill go if you pay for me to fly out there :)

[punx223]

damn nicely done DOM, I need my Dewar NOW.... well that and now I need a pot... O.o

[PhIlLy ChEeSe]

Hey guys,
I was cruzing da net looking at volt mods on GPU'S When I came upon this thread, while I did not read the whole thread it certainly looks as if bench marking would benefit from this. Maybe I'm just out of the loop and you all use it already, but I thought maybe someone would benefit from it......................Its about un-parking the cores on i7 CPU'S.

http://www.overclock.net/t/1250666/winfix-i7-owners-win7-by-default-is-crippling-our-cpus

OK back to breaking stuff now!!! :clapping:

[DOM]

my 05 doesnt count cuz i dont have a url :P

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6356&stc=1&d=1336604892

http://hwbot.org/image/782138.jpg

http://hwbot.org/image/782130.jpg

http://hwbot.org/image/782139.jpg

http://hwbot.org/image/782140.jpg

http://hwbot.org/image/782149.jpg

http://hwbot.org/image/782135.jpg

[PhIlLy ChEeSe]

my 05 doesnt count cuz i dont have a url :PGod Damn! Mighty fine job there man! 03 never gives a url does it? You wanna sell dat chip?:morpheus:

Edit just re read the post, why don't you have a link? WTF!

[DOM]

i didnt expect to get # 6 in the world on a stock card :laughing:

and i didnt save the run and plus its not a leget key :eek:

[PhIlLy ChEeSe]

i didnt expect to get # 6 in the world on a stock card :laughing:

and i didnt save the run and plus its not a leget key :eek:


CRUSH THEM MOTHER FAWKERS! :thumbsup:

http://hwbot.org/team/ocalliance/

you need a key, can you use mine? You don't have one?

[Splave]

Go dom! Glad I still have GTX-580 lightning for 01 :D

[punx223]

Go dom! Glad I still have GTX-580 lightning for 01 :D

Have any of you tested 680 in 01?

[Splave]

yeah drivers dont support compatibility bits so scores suck

[punx223]

yeah drivers dont support compatibility bits so scores suck

meh!! cmon splavester..... MAKE IT WORK!!

[PhIlLy ChEeSe]

yeah drivers dont support compatibility bits so scores suck


I noticed this on my 7970, low low score's :thumbdown:

[DOM]

Go dom! Glad I still have GTX-580 lightning for 01 :D
when you getting your cpu ?

its to easy full pot benching :laughing:

[Splave]

tomorrow I get one then friday!

[DOM]

huh? lol

you got two of them ?

[punx223]

huh? lol

you got two of them ?



haha ummm.... I have 7.... 2 dead....


btw yes full pot benching is nice but ummm yeah eat alot of LN2 that way sometime

[DOM]

haha ummm.... I have 7.... 2 dead....


btw yes full pot benching is nice but ummm yeah eat alot of LN2 that way sometime

Do you need some help with them:rofl I only got one :P

[thebanik]

Do you need some help with them:rofl I only got one :P

Let me send two your way just remember to ship yours, :P :laughing:

[DOM]

Let me send two your way just remember to ship yours, :P :laughing::laughing:

I'm still trying to find if I can get some more mhz out of it I haven't push some of the volts hard cuz idk what there for haha

I need to read up on them maybe I can get past 6.7 and past 6.4 for wprime :)

Need to check how much ln2 I have left.... I was half alseep then falling asleep when I was submitting the runs lol

I had to pour the ln2 cuz I didn't know the top wasn't screwed tight so it didn't build up psi over night :P

[Splave]

huh? lol

you got two of them ?

2 of many im sure ;) We are not all golden hand dom :)

[DOM]

2 of many im sure ;) We are not all golden hand dom :)

Mines not golden I want 7ghz :laughing:

[Splave]

I'll take your "garbage" haha

[DOM]

:rofl

well see if i can pull anything out of it 2morrow

[Splave]

was having a shitty morning benching started off with a shitty mount on the 7970, thawed it out remounted and a wild 7970 WR, 2nd global for single card appeared lmao

http://i.imgur.com/AOD7N.jpg

Should be enough for MOA 1st :)

[punx223]

was having a shitty morning benching started off with a shitty mount on the 7970, thawed it out remounted and a wild 7970 WR, 2nd global for single card appeared lmao

http://i.imgur.com/AOD7N.jpg

Should be enough for MOA 1st :)

guh dayum son.... nice....

and yeah DOM were not all golden first chip pops like you :P

[BenchZowner]

Very nice Allen!

[DOM]

Nice one Allen :)

[Splave]

thanks bro's booting up ivy right now! w00h00

Golden hand please bless my chip when you get a second. k thanx bye

[DOM]

thanks bro's booting up ivy right now! w00h00

Golden hand please bless my chip when you get a second. k thanx bye
it has been blessed :good: :laughing:

you hitting it with the juice ? im thinking yes cuz there not other way with ivy :)

[punx223]

How is it doing?!?! TELL US?? hahaha

[Splave]

stuck at x35 lmao been trying for 2 hours

going to reinstall windows xp now ROFL! Bios and POST screen both show x47 1.25v but windows xp shows x35 bah...

[Splave]

EDIT: testing with retail OS now, I think it does not like tiny XP

[punx223]

EDIT: testing with retail OS now, I think it does not like tiny XP

dude I hope your not burning LN2 on XP problems :(

[Splave]

NOPE not this time ;) learned from previous failures. im on TRUE120 atm

[DOM]

BOOOOO LOL

what mb you using ?

[Splave]

gd65 ;) was going to use it for MOA stuff and run 4 dimms hypers but ended up not needing to try, seems like a nice little board didnt cost too much either

[DOM]

Have you tryed flashing the mb bios again I think thats what helped duke on his msi mb

[Splave]

yeah I ll give that a shot right now, its still fucked after reinstall

00ps forgot MEI drivers lol

[GFDuke]

Have you tryed flashing the mb bios again I think thats what helped duke on his msi mb

^^^Yep

[Splave]

just hit x40 bitches! ;)

[DOM]

100MHZ more over turbo clocks :rofl

[punx223]

100MHZ more over turbo clocks :rofl

x40 FTW... oh wait... thats.... almost.... stock..... :p

[Splave]

x44 1.25v 32m pass so far :)

taking it sloooowwww, ln2 is at work anyways lmao

[punx223]

x44 1.25v 32m pass so far :)

taking it sloooowwww, ln2 is at work anyways lmao

hahaha X63 110 BCLK GOGOGO

[Splave]

x46 1.25v 32m pass hehe

[DOM]

x44 1.25v 32m pass so far :)

taking it sloooowwww, ln2 is at work anyways lmaopus :laughing:

dont you have the key :P

hahaha X63 110 BCLK GOGOGO:thumbsup:

[Splave]

pus :laughing:

dont you have the key :P

:thumbsup:

x47 1.24v ;) just doing it to piss you off now

dont want to carry dewar home when I will bench early in the morning tomorrow. Dogs usually wake me up at 3am to go out then I drift off till 4:30-5 and usually thats it and im up. Getting old ya know?

[punx223]

x47 1.24v ;) just doing it to piss you off now

dont want to carry dewar home when I will bench early in the morning tomorrow. Dogs usually wake me up at 3am to go out then I drift off till 4:30-5 and usually thats it and im up. Getting old ya know?

sleep? what is this sleep thing you speak of? This is the kind of jackassery that sounds like it gets in the way of benching tbh

[Splave]

Its more like laying with my eyes closed and mind racing lmao

[DOM]

x47 1.24v ;) just doing it to piss you off now

dont want to carry dewar home when I will bench early in the morning tomorrow. Dogs usually wake me up at 3am to go out then I drift off till 4:30-5 and usually thats it and im up. Getting old ya know?:confused2: im not mad just wanna see what yours can do lol

im fixing to go to work in less then an hr i better see some 6ghz+ old man :laughing:

how old are you anyways ?

sleep? what is this sleep thing you speak of? This is the kind of jackassery that sounds like it gets in the way of benching tbhi need sleep or ill be there falling alseep sitting down :blush:

but then i only sleep like 4-6hrs a day :blink:

[Splave]

:confused2: im not mad just wanna see what yours can do lol

im fixing to go to work in less then an hr i better see some 6ghz+ old man :laughing:

how old are you anyways ?

i need sleep or ill be there falling alseep sitting down :blush:

but then i only sleep like 4-6hrs a day :blink:

24.875yrs old :thumbsup:

[DOM]

:moon:24.875yrs old :thumbsup:

[Neuromancer]

00ps forgot MEI drivers lol

thatll burn yah :ohcrap:

glad you got it sorted :)

[punx223]

meh sleep is for weak... I will be 29 next weekend and I maybe get 2-3 Hr at most.... between Writing, working, testing etc....

[DOM]

No WTH OCing :P

LOL

[thebanik]

DOM, how much LN2 are these Ivy's eating up for each session???? Planning on benching this weekend hence wanted to check if my 26L dewar would be enough

[thebanik]

gd65 ;) was going to use it for MOA stuff and run 4 dimms hypers but ended up not needing to try, seems like a nice little board didnt cost too much either

.....resolved I see......

[BenchZowner]

DOM, how much LN2 are these Ivy's eating up for each session???? Planning on benching this weekend hence wanted to check if my 26L dewar would be enough

I recorded a 6 hours benching session with 18L ( only IB LN2 cooled ).
CB-free, and crazy voltages 1.9V++ most of the time :P

Spent lots of time with the Gigabutt mobo wasting LN2 before I switched to the almight Gene-Z and rocked da hood :P

[PhIlLy ChEeSe]

I recorded a 6 hours benching session with 18L ( only IB LN2 cooled ).
CB-free, and crazy voltages 1.9V++ most of the time :P

Spent lots of time with the Gigabutt mobo wasting LN2 before I switched to the almight Gene-Z and rocked da hood :P


HAAAA:thumbsup:

ET Phone home!!

[DOM]

DOM, how much LN2 are these Ivy's eating up for each session???? Planning on benching this weekend hence wanted to check if my 26L dewar would be enough im not really sure since i dont keep track of it lol

but i just have a 35L and it last about 2 long bench session but im about to get on it right now ill let you know but it more like how BenchZowner said if i had to guess :)

[Splave]

what are you guys using for pots?
Turbo/heavy?

[DOM]

F1EE

[DOM]

6362

about the best with out wazza :P i hate it lol

[Splave]

what kinda voltages dom meister, SA IO and pll?

[DOM]

let me take a ss

its being a bitch with ht it comes up at x35 with out the right multi XD

[Splave]

1st chip sucked balls 5ghz = 1.49v air
2nd chip better 5.1ghz = 1.4v air :) I think I test that one first on ln2

[BenchZowner]

I have a strong feeling that the 1st chip will be better than the 2nd under LN2 Allen ;)

[Splave]

agreed :)

[Splave]

http://i.imgur.com/acEDi.jpg

ya I think I will try this one lol

[DOM]

still no 6+ :P

nice mem clocks mine seem to suck :(

[Kal-EL]

Damn 5jiggers on 3.2ghz voltage, noice.

[Neuromancer]

Damn 5jiggers on 3.2ghz voltage, noice.

4.5 voltage you mean?

Or were talking about AMD ;)

:thumbsup:

[Kal-EL]

Yorksfield! ;)

[DOM]

is this any good clocks on the mem ?

http://www.overclockaholics.com/forums/attachment.php?attachmentid=6364&d=1336923621

[thebanik]

http://i.imgur.com/acEDi.jpg

ya I think I will try this one lol

If it does not do well on LN2 then I am pretty sure you will get above market price for selling it to air overclockers......but anyways seems to be an amazing chip...mine needs 1.45V for 5G, :(

[Splave]

If it does not do well on LN2 then I am pretty sure you will get above market price for selling it to air overclockers......but anyways seems to be an amazing chip...mine needs 1.45V for 5G, :(

http://4.bp.blogspot.com/-9QjARWd5a84/T3OXHJJbe1I/AAAAAAAAA34/OVtLNvwpMvI/s1600/nod-of-approval.gif

[DOM]

Wtf :rofl


Is my ss working I just see a small box with x :P

[Splave]

just a hair shy of 2600 on this $30 ram kit I got
8-12-9-27 rofl have 12gbs of it....epic

[DOM]

which ram ?

my PSC ripjaws oc alot better then the trident x 2400 :P

[PhIlLy ChEeSe]

Guy's I cant submit a score from the new version of Heaven V3, any help? I go to down load the file it says not a valid file?

Thank you!

[DOM]

Guy's I cant submit a score from the new version of Heaven V3, any help? I go to down load the file it says not a valid file?

Thank you!
http://91.121.148.119/downloads/hwbot_unigine_heaven_v103/

you have to use the hwbot ver ;)

[PhIlLy ChEeSe]

http://91.121.148.119/downloads/hwbot_unigine_heaven_v103/

you have to use the hwbot ver ;)


lol I got the wrong one wtf! TY Dom! :thumbsup:

[Splave]

which ram ?

my PSC ripjaws oc alot better then the trident x 2400 :P

ripjaws 2000 9-9-9-27 3x2gb :) BBSE :thumbsup:

[Splave]

just insulated, going to hit the juice right now :)

[punx223]

just insulated, going to hit the juice right now :)

nice!! make it happen bro.

were the modules your talking about the ones you linked from Fleabay splavester?

[Splave]

yep ;)

hows this for efficent lol
http://hwbot.org/submission/2283589_splave_wprime_32m_core_i7_3770k_3sec_546ms
perhaps all the air tweak helped!

chip is no DOM though, 6.6ghz is the max i could get it valid from 1.88v to 1.92v will have to try it in the gene as well.

[DOM]

you made wpime look easy :P

so the mem tim helped alot ?

how high did you go on the PLL ? for me i started at 1.9 but it seemed it needed more the higher i went so i used like 2-2.1v

1.8vPll tryed 2.0vPll didnt help for me :)

[punx223]

yep ;)

hows this for efficent lol
http://hwbot.org/submission/2283589_splave_wprime_32m_core_i7_3770k_3sec_546ms
perhaps all the air tweak helped!

chip is no DOM though, 6.6ghz is the max i could get it valid from 1.88v to 1.92v will have to try it in the gene as well.

wow nice result :)

[Splave]

z77-gd65 RIP started giving me FF this morning right off the bat at warm temps...now kicks on for 1 sec and shutsdown no LED post codes...gene will be here this afternoon...I think it just died of a broken heart.

[punx223]

z77-gd65 RIP started giving me FF this morning right off the bat at warm temps...now kicks on for 1 sec and shutsdown no LED post codes...gene will be here this afternoon...I think it just died of a broken heart.

lol, wow that sucks but LOL @ Broken heart

[PhIlLy ChEeSe]

z77-gd65 RIP started giving me FF this morning right off the bat at warm temps...now kicks on for 1 sec and shutsdown no LED post codes...gene will be here this afternoon...I think it just died of a broken heart.


Damn dude!
RIP MSI Z77:morpheus:

[PhIlLy ChEeSe]

http://91.121.148.119/downloads/hwbot_unigine_heaven_v103/

you have to use the hwbot ver ;)



OK I got it down loaded but the DX 11 side will not run? DX 9 runs fine but the other one hangs at the BENCHMARK screen?

[DOM]

OK I got it down loaded but the DX 11 side will not run? DX 9 runs fine but the other one hangs at the BENCHMARK screen?

Which ver did you dl ?

I just tryed the complete and only think u had to do was look for the heaven.exe

How long did it hang on the loading screen ?

[Splave]

dont you need .net 3.0 or something?
i forget what it is that fixes that, happend to me a couple times

[PhIlLy ChEeSe]

Which ver did you dl ?

I just tryed the complete and only think u had to do was look for the heaven.exe

How long did it hang on the loading screen ?


It just stays there, DX 9 version starts although slow.
dont you need .net 3.0 or something? Yeah I'll find it, Thanks guys!! Back to the numbers...................

Update, I saw in the HWbot forums they said turn on HD sound in the bios WTF? What does HD sound have to do with DX11?

PS my OS is 64bit W7 all updates, so its not a "NET" issue, unless I didn't get all updates witch I'll check

[punx223]

It just stays there, DX 9 version starts although slow.
Yeah I'll find it, Thanks guys!! Back to the numbers...................

Update, I saw in the HWbot forums they said turn on HD sound in the bios WTF? What does HD sound have to do with DX11?

PS my OS is 64bit W7 all updates, so its not a "NET" issue, unless I didn't get all updates witch I'll check

I think it is actually a "Net framework" issue

[PhIlLy ChEeSe]

I think it is actually a "Net framework" issue


I tried making sure all is up to date, should I remove and re install it? Any suggestion's at all?
PLEASE! :thumbsup:

[punx223]

try completely remove and reinstall... Ive never had such an issue

[DOM]

I tried making sure all is up to date, should I remove and re install it? Any suggestion's at all?
PLEASE! :thumbsup:
are you using the complete install ?

[PhIlLy ChEeSe]

are you using the complete install ?


Of HWbot heaven, yes I tried all three versions all the same results.

Dot net, yes is up to date

DX is all up to date, tried removing n re installing GPU drivers, no go. I got all win 7 updates except the optional ones witch I don't use. I can run heaven but in DX9 mode If I try DX11 mode it sits at the splash screen right after it says "Bench" .

try completely remove and reinstall... Ive never had such an issue

yup! I tried all three versions......... Its like the new wrapper doesn't work or something.I can run the old version no problem but someone posted the new one gives more boints.

[DOM]

Have you messed with the msconfig ?

Idk what it could be.... I was just installing/updating w7 for 7970 to bench ill see if I have the same trouble

[Splave]

bench aq3? me too! 500k or bust

[PhIlLy ChEeSe]

Have you messed with the msconfig ?

Idk what it could be.... I was just installing/updating w7 for 7970 to bench ill see if I have the same trouble


COOL COOL!
I do turn off a ton of stuff in the back ground, so I'm hoping a reformat will fix it. :Hi:

[DOM]

bench aq3? me too! 500k or busti nedd ln2 :laughing:

COOL COOL!
I do turn off a ton of stuff in the back ground, so I'm hoping a reformat will fix it. :Hi:try setting it to normal and see if it works.....

[Splave]

philly when I was messing around on x79 I got some weird error when trying to run it too, so i will probably be in the same boat as you in about 15 minutes when OS loads

[PhIlLy ChEeSe]

philly when I was messing around on x79 I got some weird error when trying to run it too, so i will probably be in the same boat as you in about 15 minutes when OS loads


I think it is linked to the X79, had three GPU'S in it last night, think i need a bigger power supply :blush:. Wouldn't pass a run, didn't want to push my luck.

Got a T45 "Tpower" board had one before, gonna play wid it a while :scared:

[Splave]

47k 06 done :)

[DOM]

47k 06 done :)
ss or it didnt happen :laughing:

580 or 7970 lighting ?

[Splave]

680 ;)
it didnt save but I have file and screen shot, FM is going to try and validate it lmao

[DOM]

i saw it on the bot fourm lol


i might get some ln2 tomorrow or wait till next week was going to order x7 GC-Extreme $77 bucks :shock:

idk if ill need that many though :laughing:

[Splave]

sucks huh lol

[DOM]

yeah i got a 61K 05 run but no url :laughing:

how many tubes do you use of this stuff ?

[Splave]

this will have to do for now lol
http://i.imgur.com/AkZbU.png
3dmark.com3dm06/16669456


about 1 a month maybe?
more if you do gpus

[DOM]

50k OR BUST LOL :P

[Neuromancer]

500k AM3 I wanna see that, and no dont have to be hwbot version :)


I am guessing that is going to need a 8 GHz centrifugal motion-bridge chip though something QLC based, on the 18nm structure. and on air...

[DOM]

Looks like I'm going to get some ln2 for the weekend :)

Now I need to put the 7970 or 580 on ln2 but I'm still a noob on freezing gpus

Or I can just bench all my older cards on air and cpu on ln2 only hmmm

[Splave]

580 on ln2 about 1300mhz should pwn 06 HT not necessary

[DOM]

Yeah I seen that ht off still does good in 06 :)

I guess ill start to prep the mb and 580 today going to go to graninger and get some more insulation for my cpu and gpu pot need to be re done

And guess ill start testing the 580 ccb & cb cuz I didn't rec any of that info lol

I know I've done 1400 on it ... But not sure what's to much volts for it

Good news I'm getting my 2 hds today from advance rma no mote slow old hd lol

[thebanik]

Looks like I killed my CPU, :(.......Forgot to switch off the power after testing on LN2. All the Ice melted down and inside the socket, :(.....Saw it a couple of days later......Anyways was not a golden CPU or anything......

[PhIlLy ChEeSe]

Looks like I killed my CPU, :(.......Forgot to switch off the power after testing on LN2. All the Ice melted down and inside the socket, :(.....Saw it a couple of days later......Anyways was not a golden CPU or anything......


RIP :Hi:

You sure its dead, didn't think the socket had power when its switched off?

[DOM]

That sucks I almost killed mine last time had condensation build up... it was humid in the garage t rained the day before :P

I was getting pissed cuz it wouldn't oc it was the hs's around the socket where dripping wet.... That sounds like a good thing :laughing:

[Splave]

sweeeeeeet jesus, they validated it for me :D
http://hwbot.org/submission/2284682_splave_3dmark06_geforce_gtx_680_47057_mark s?recalculate=true

Extra 10 World record points I will take it

[thebanik]

sweeeeeeet jesus, they validated it for me :D
http://hwbot.org/submission/2284682_splave_3dmark06_geforce_gtx_680_47057_mark s?recalculate=true

Extra 10 World record points I will take it

Get in Top 5 already Allen, :P

[Splave]

working on it! :D ln2 guy shut me down for this weekend, hes like ohhhh you wanted me to fill it? rofl! ah well I have a bunch of air tweaking to do first and 80F all weekend going to get my tan and do some fishing ;)

[punx223]

working on it! :D ln2 guy shut me down for this weekend, hes like ohhhh you wanted me to fill it? rofl! ah well I have a bunch of air tweaking to do first and 80F all weekend going to get my tan and do some fishing ;)

damn :(

[DOM]

Tank is filled but have to work OT tonight :P

[PhIlLy ChEeSe]

sweeeeeeet jesus, they validated it for me :D
http://hwbot.org/submission/2284682_splave_3dmark06_geforce_gtx_680_47057_mark s?recalculate=true

Extra 10 World record points I will take it


#1 in the world with 1 680 :cool3:

[GFDuke]

Tank is filled but have to work OT tonight :P

Make more moeny to buy more stuff. :thumbsup:

[DOM]

Make more moeny to buy more stuff. :thumbsup:
but i dont like working on my days off and i need more time to bench :laughing:

[kikicoco1334]

holy shit, i havn't been on for a long ass time and everything is changed in here hehehe

[DOM]

anyone got the link to pic to the switches on the back 580 lighting ? i tryed looking for MD post but i cant find it :P

everything is prep to go cold :cool3:

[crio]

Back again..........It's been a while guys...
Just some short testing with Asrock Extreme 4. Nice and stable mobo - bad bios so far.1.30 sucks in stability but can give 2V, 1.40 is very stable but cant give more that 1.7V
CPU seems to have much more in it....With the proper mobo (Maximus V)
Also can do 1M at 6100+ but dont have time nor juice.

http://hwbot.org/submission/2285144_
http://valid.canardpc.com/cache/screenshot/2375526.png

http://hwbot.org/submission/2285216_
http://www.hwbox.gr/attachments/hwbot-scores/7384d1337523199-hwbot-superpi-1m-ranking-screen000.jpg

[Splave]

hah! should be good one with proper volts :D

[crio]

I am happy with 6.4G

[DOM]

anyone got the link to pic to the switches on the back 580 lighting ? i tryed looking for MD post but i cant find it :P

everything is prep to go cold :cool3::argh2:

come one ppl lol i already slept for the day just need to know before benching

goggle didnt help :blush:

idk what to do with the switch near the pci-e????????????


nice cpu crio welcome back :)

[GFDuke]

Which one? Try here? http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/42992-msi-geforce-gtx-580-lightning-review-3.html

[DOM]

Yeah I switched those but I was talking about the one.at.the bottom

But I got it clicking just not happy with the scores :P

[GFDuke]

ISn't that a bios switch at the bottom?

[DOM]

Idk what that one is the bios switch is by the other ones idk but that's the top to me lol

Okay I'm just pissing ln2 away I can beat my old runs on air even at 1400 gpu clock wtf :rofl

[GFDuke]

What benches are you doing?

[Splave]

if you say aq3 06 or 05 I will stab you through the computer screen ;)

[DOM]

I been trying all besides heaven and 11 vantage

FML :laughing:

[GFDuke]

Reinstall your vid card drivers?

[DOM]

Oh yeah even 6.5 cpu I'm about to break something lmao

[DOM]

Reinstall your vid card drivers?

I'll try that running 06 right now it didn't like 6.5@1.85v :P

[GFDuke]

What part didn't like it the cpu tests? DO you have ROG? You can downclock just before you get to the cpu test. Same OS as your air runs?

[DOM]

Yep I think Allen cheats...... Jk :rofl

He makes it look to easy wish I lived up there sucks benching alone :(

[GFDuke]

Yep I think Allen cheats...... Jk :rofl

He makes it look to easy wish I lived up there sucks benching alone :(

I agree. I've been benching for at least 10 years and i never had a buddy to bench with.

Although there have been alot of phone calls.

[Splave]

I'll try that running 06 right now it didn't like 6.5@1.85v :P

did you disable ht? :thumbsup:

[DOM]

yep crapola

im done ran out of juice to much PITA using LN2 on the GPU for crap scores :thumbdown:

didnt get much just this :confused2:

http://hwbot.org/submission/2285424_domoca_3dmark06_geforce_gtx_580_46021_mark s

http://hwbot.org/submission/2285423_domoca_aquamark_geforce_gtx_580_474225_mar ks

[thebanik]

yep crapola

im done ran out of juice to much PITA using LN2 on the GPU for crap scores :thumbdown:

didnt get much just this :confused2:

http://hwbot.org/submission/2285424_domoca_3dmark06_geforce_gtx_580_46021_mark s

[/URL]

DOM, anything specific for the 3DM06 run??? Or just new drivers and/or Ivy is the reason for the magic????

Also no better score in 01 with GPU on LN2???

Also I guess our team needs to work on Aquamark....Ocers are getting above 5XXXXX so easily these days....Its a shame Allen, DOM and Duke have not able to crack the top 20 yet..

[DOM]

DOM, anything specific for the 3DM06 run??? Or just new drivers and/or Ivy is the reason for the magic????

Also no better score in 01 with GPU on LN2???

Also I guess our team needs to work on Aquamark....Ocers are getting above 5XXXXX so easily these days....Its a shame Allen, DOM and Duke have not able to crack the top 20 yet..

No if there's some magic idk what it is lol

I just tryed to run 06 the highest with out ht.... It was a good run but I couldn't match the other guy on air with a higher cpu clock.... I'm guessing it seems its all about cpu clock now cuz alot of guy are taking the top spots with stock cards and ivy on ln2

But idk what was wrong I tryed 01 and was getting crap scores I was only getting about 1500-1600 in nature, but when I did it with stock card I hit 1800

I'm not sure but I wasn't to happy card was running 1400 like nothing I even tryed 1000-1400 it just wasn't happening :(

But this coming weekend I'm just going to run cpu on ln2 and run as many cards I can going to see which side green or red that I have more of to knock them out first :)

[Splave]

lol dom dude work on your screenshots bro neither of those are valid lmao :) you were probably just frustrated.

[DOM]

lol dom dude work on your screenshots bro neither of those are valid lmao :) you were probably just frustrated.
06 is the free ver so i could get the url since i dont have the legit keys for them ;)

am3 its gpu-z fault :P i saw the stupid pop up on it after i submitted it :laughing:

im not really frustrated just pissed i used all the ln2 and it wasn't scaling with gpu clocks :Dizzy:

im going to sick with stock cooling :rofl

[GFDuke]

Any CBB or CB on the 3770K's?

[DOM]

So far what I seen they don't have a CB.... Mine doesn't have a CB and had CBB of -125c but tryed less vCCIO, vCCSA, vPLL when benching with the 580 on ln2 but I had no CBB on the cpu so not sure if it was the lower volts but I like no CB at all :)