New Beastly PSU

[Neuromancer]

http://www.lepatek.com/eng/product_content/1/1/20/#produkte

1600W gold rated modular PSU MSRP $329

[MaadDaawg]

Beastly, but can you plug it into a 15amp wall outlet??

[Neuromancer]

Beastly, but can you plug it into a 15amp wall outlet??

Technically? Yes. A 15A wall socket is good for 1800W.

If its a GFCI it will trip much lower. (I did it with a AX1200 :) )

[punx223]

Technically? Yes. A 15A wall socket is good for 1800W.

If its a GFCI it will trip much lower. (I did it with a AX1200 :) )

A standard 15A is good for approx 1350ish

1800 your looking more around 20A

[Neuromancer]

A standard 15A is good for approx 1350ish

1800 your looking more around 20A

Mathematically untrue. but it all depends on the quality of your line and circuit breakers I suppose. 1350 is probably right for most circuits. but I have been in houses where a AC unit did not trip the breaker when a PC was running on the same line. But line was new.

[Witchdoctor]

That is pretty sick .......... never heard of the Lepa other than old Charlton Heston movies ...... :blink:

[MaadDaawg]

That is pretty sick .......... never heard of the Lepa other than old Charlton Heston movies ...... :blink:

:laughing: +1 doc :laughing:

[punx223]

Mathematically untrue. but it all depends on the quality of your line and circuit breakers I suppose. 1350 is probably right for most circuits. but I have been in houses where a AC unit did not trip the breaker when a PC was running on the same line. But line was new.

I know mathematically but I speak from what I have seen common...

Mathematically 50 percent of homes would probably burn an outlet or pop a breaker at upwards of 1300W tbh.

if every house was new it would be awesome but we know how that goes

[MaadDaawg]

My house is 106 years old :ohcrap:

MOST of the wiring was replaced in 1997.. prob is, don't know what all wasn't :laughing:

[Witchdoctor]

once I get setteled I will be building a bench station lined with independant 20 amp recepticals ......... :thumbsup:

[MaadDaawg]

I've given a lot of thought to wrapping conduit around the outside of the house from the breaker box to my "office" ;) thought about it, haven't done it :laughing:

Really no good route cause of the basement door :ohcrap: