A December to Remember

[GFDuke]

I guees its my turn to start things up. Even though i'm behind the hardware game. Gotta start somewhere. Needs more tweaking but hell it's been a year.

[Dentlord]

Good start Dukie! Nice chip there, rape that biatch!!

I'm benching 8800 ultra today, hope it clocks worth a crap...

[Splave]

w00t nice work dukie way to crank

testing MSI 560ti 448shader Power Edition today

[thebanik]

Got 8150 today with a MSI GD80 board, hopefully would have time to bench it, and hopefully the board will play nice, have not seen any good result with any other board other than CHV though.......

[Witchdoctor]

Nice Duke .......... :thumbsup:

You get lucky with that chip or buy it pre binned ?

Gotta love Sandy .......... :)

[DOM]

nice chip duke :)


w00t nice work dukie way to crank

testing MSI 560ti 448shader Power Edition today
that card looks like my PE 570 :P

i wonder if it can be flashed to a 570

[GFDuke]

Nice Duke .......... :thumbsup:

You get lucky with that chip or buy it pre binned ?

Gotta love Sandy .......... :)

Thanks guys. pre-binned witchy :D

[Dentlord]

Ultra was a decent performer, and a quick 125 hw boints :)

I just remembered that I love hardware benching!

I have another for sli, but its a stinker ... might eff with it anyway.

[Splave]

actually bro for the team you raised 140 points! with power points great work dude.

[GFDuke]

Working on Sp32 atm. Having a bitch of a time with the ram still. Should be good enough for something though. brb. I can do better. I just had to go to the doctors for my physical. lol

[MaadDaawg]

is my 5700 Ultra good for any boints?

AGP :laughing: but ??

[Splave]

Working on Sp32 atm. Having a bitch of a time with the ram still. Should be good enough for something though. brb. I can do better. I just had to go to the doctors for my physical. lol

hey bro, set 9-11-9-27-88-1t in bios tWCL to 8 and put 1.725vDimm strap to 2133 and try it. Then tighten subs from there. :) Plus get the luna olive theme not classic. Other than that great start


This 560ti is a little beast, 30k vantage on air rofl submitting scores now

[Dentlord]

I still gotta run vantage with the ultra, itll be the first use of my 2011 setup I guess lol

[Splave]

hehe :D sweet man, nice work. What temps and vcore you working at? droop bad like the gtx or no

[Dentlord]

hehe :D sweet man, nice work. What temps and vcore you working at? droop bad like the gtx or no


cold slow around -90c so I'm benching mid 80's ... 1.55v (up to 1.6v) yeah bad droop, set 1.6 with vr and itll droop down to 1.52 at times.

[Patch]

Nice work men.

Looks like some fever is getting fostered round here.

[Splave]

this was fun :D will bench cold when they send unlocked AB

http://hwbot.org/submission/2226426_splave_unigine_heaven___basic_preset_dx9_g eforce_gtx_560_ti_448_3725.56_dx9_marks

http://hwbot.org/submission/2226428_splave_unigine_heaven___xtreme_preset_dx11 _geforce_gtx_560_ti_448_1588.76_dx11_marks

Guys dont forget dx9 heaven gets you hardware and Team Hardware Power Points!!!

http://i.imgur.com/4Dwu3.jpg (http://imgur.com/4Dwu3)

http://i.imgur.com/FKnml.jpg (http://imgur.com/FKnml)

[kikicoco1334]

WOW y'all are just going at it!
Al, that ram of yours is kinda ridiculous bro!

Finals is next week got a TON of homework need to make up but after that I monna give my rig another crack at it ;)

[DOM]

I'm sad your 560 raped my 570 :blush:

[OC Maximus]

:wtf:

[Patch]

I want that cpu.

[Splave]

lol no you dont, only a 5400 chip

but thanks for the memory link last week, cleaned house lol

[GFDuke]

hey bro, set 9-11-9-27-88-1t in bios tWCL to 8 and put 1.725vDimm strap to 2133 and try it. Then tighten subs from there. :) Plus get the luna olive theme not classic. Other than that great start


This 560ti is a little beast, 30k vantage on air rofl submitting scores now

Thanks bro. I'll try that. I'm using Tiny XP. I don't think Luna is on it. Is it? Is Server 2003 better?

[Splave]

copy http://www.kellys-korner-xp.com/regs_edits/Resources.zip to your c:windows and overwrite

Some timings that probably work at 7-10-7-27-74 (2nd number tRCD will probably have to stay at 10 no matter what)

btw patchie you were right they are psc :D finally I can add some PSC to my collection

[Patch]

Beats my 5330 CPU.

Yikes! Glad I picked up another pair before you swooped in.

Trips me out how RAM shipped from Ireland gets to my house faster (and sometimes cheaper) than RAM from neweegg.

[Splave]

Haha yeah totally

[HybridChiller]

this is what i did yesterday , need to do more benches today with this vga :

[GFDuke]

hey bro, set 9-11-9-27-88-1t in bios tWCL to 8 and put 1.725vDimm strap to 2133 and try it. Then tighten subs from there. :) Plus get the luna olive theme not classic. Other than that great start


No go. Even at x55 x100. Round and convergence Errors. Desktop freeze at x55 x104. These cant do 1:8. Or i can't figure them out. They do 1:7 all day long but i keep getting "not Exact in Round" And "Not convergence in Sq" Errors @ 1:8. I've tried more vdimm and vcore nada. Tried to loosen timings still no go. I started at 9-11-9-27-88 and even went up to 10-11-10 - 27. Same errors.

[Witchdoctor]

Had off today and got a chance to knock a bit of rust off............. :thumbsup:

My chip is a bit degraded but is still solid at 5.5 , wish I had one of those 5.8 monsters :shock:

[GFDuke]

wtg Doc! Those 5.8 monsters are costly bro. But they'll come down in price soon with 2011 on the market.

[kikicoco1334]

nice run Doc!

[Witchdoctor]

Yea I heard that, Had a lot of fun today, eff it I just benching and having fun, Ill post at the bot but TBH that end of it has lost it's luster for me, hardware is worthless unless you have the top score on the team ..... that is a tall order around here........ :laughing:

Good to see you at it again, how the new digs treating you ?

[GFDuke]

I thought top scorer on the team boints are only for the teams bointage and standing. You still get your hardware points and global don't ya?. I actually jumped 11 spots in the Worldwide, National and Team ranking with just 3 submissions.

[Witchdoctor]

Yea you get globals and all hardware if you are the top team score, second and down get 1/10 of hardware towards team but still all globals



you get all of them to compete in the Hardware masters league though

[GFDuke]

Ah gotcha. The new setup is sweet, i love it. I'm needing a tall chair though. Not much need for standing when you're running a SS. No pouring. lol Got a 580 lightning sitting in my tool chest. Just waiting for LN2. Ahhem. Neeed more work. And i need to get this ram sorted out before i go buying 230L of ln2. Cause once i tap that Dewar it's all out. Games on. And it sucks when you have all that ln2 and ya can't do shit with it.

[MaadDaawg]

Haven't tried the SB-E yet (tomorrow), but at least with the SB I'm thinking leave the CPU on SS and just pour the GPU(s).

Lotta GPUs to pour using up 230 liters Bro :laughing:

[GFDuke]

Got alot of cards that can be benched for SB. Esp 3D01. Looking at my profile it's a bench i lack on and theres alot of points to be had there. So... i really need to learn that bench. I've ignored it to long. It really didn't matter much in my scores with the old bot. But now its big. Plus once i start draining it, it starts to evaporate. So i have to stick with it to get as much as i can out of the dewar. It's usually about 3 days straight. I actually have 0 scores sub'd for 3D01. wtf!!!

[Dentlord]

I had to revisit Vantage to take 2nd place with the ultra ... bugged me knowing I could do it lol

Check out the cpu score, 3960x at 5.2ghz is equal to 980x at 5.8ghz lol


http://overclockaholics.com/forums/attachment.php?attachmentid=5930&stc=1&d=1322873684

[GFDuke]

Wow thats sweet man.

[Kal-EL]

STFD! noice!

[HybridChiller]

nice cpu, any luck with Bclock OC ?

[MaadDaawg]

Got alot of cards that can be benched for SB. Esp 3D01. Looking at my profile it's a bench i lack on and theres alot of points to be had there. So... i really need to learn that bench. I've ignored it to long. It really didn't matter much in my scores with the old bot. But now its big. Plus once i start draining it, it starts to evaporate. So i have to stick with it to get as much as i can out of the dewar. It's usually about 3 days straight. I actually have 0 scores sub'd for 3D01. wtf!!!

Get yourself lots of 5 hour energy drinks :rofl:

[Dentlord]

nice cpu, any luck with Bclock OC ?

bclk or multi all ends up the same place, right around 5215, so I figured for vantage it didn't matter.

[Witchdoctor]

Back pounding hardware Dent.............. :thumbsup:

[GFDuke]

Here's one for ya. All of a sudden when i get into windows my bclk is showing 100 when i have it set to 104 in the bios. So... In the bios i'm set at X55 @ 104bclk. In the post it says i'm running 5720. When i get into windows cpuz reports X55 @ 100 5500mhz. and its performing like X55 @ 100. Ive tried several saved profiles and they all report the same. My bclk is not reporting right in windows. I even tried a different XP install thinking i corrupted my benching XP install but its the same.

EDIT: Just built a new profile from scratch and the same things happening. Bclk isnt going up. Its staying at 100.

EDIT2: Tried uping the bclk from stock settings and the same thing. Windows shows 100 even though its set at 102 in the bios.

Hit me up with the bad news. I can take it. :ohcrap:

[MaadDaawg]

Could it be your BIOS Bro?

[Witchdoctor]

have you tried bumping it with software ?

Edit:

Here is a monster a whopping 360 in 06 ....... :laughing:

[GFDuke]

Could it be your BIOS Bro?

I might try flashing it.

No witchy. It dosn't move. I'm not using ROG Connect but i set it up just to see if it would.

[GFDuke]

What bios is everyone using? I'm on the 2050 right now. Maybe i'll try the 1904 one i have.

[Witchdoctor]

I have been using m4e2050 as well
Seems to be decent so far

you have the z68 or P67 flavor ?

[GFDuke]

you have the z68 or P67 flavor ?

Idk. lol This is weird though cause like i said when i'm booting up the post screen says im at 5720 and CPUZ says im at 5500 when im in Windows.

[Witchdoctor]

That blows man I would start flashing backwards till you find one that works .....

Hope your chip isn't wasted .........

[GFDuke]

Well i just flashed the bios again. That didn't work. :ohcrap: I think i killed something.

[GFDuke]

UPDATE: Just tried switching to BIOS chip#2 and the bclk upage is showing up in windows. I havn't flashed that chip, its still on the stock bios the board came with 1409. But i tried flashing chip #1 back to the 1904 bios but the bios flash wont go backwards to an out dated one. Guess i'll jusr have to wait for an update or just buy a bios chip. I'm flashing chip#2 to the 1904 bios. Idk if i trust the 2050 now.

Edit: Confirmed! Bios Chip #2 holds the bclk in windows on version 1904.

[Witchdoctor]

That;s great at least you can roll at 5.7 for benching :thumbsup:

[MaadDaawg]

UPDATE: Just tried switching to BIOS chip#2 and the bclk upage is showing up in windows. I havn't flashed that chip, its still on the stock bios the board came with 1409. But i tried flashing chip #1 back to the 1904 bios but the bios flash wont go backwards to an out dated one. Guess i'll jusr have to wait for an update or just buy a bios chip. I'm flashing chip#2 to the 1904 bios. Idk if i trust the 2050 now.

Edit: Confirmed! Bios Chip #2 holds the bclk in windows on version 1904.

I had good luck with 1407. 2050 was problematic for me as well :Dizzy:

[Witchdoctor]

knock on wood, it has been tight as a drum so far for me

Where's the hot rod custom BIOS's for the MIVE ???

There used to be a guy over at XS that had some good Asus BIOS's

Ket's dragon BIOS I think they were called if memory serves me

will have to take a look around

[MaadDaawg]

I'm hoping to get my P67 MIVE back next week :thumbsup:

[GFDuke]

1904 seem good so far. My Wazza skills blow. lol

[DOM]

1904 seem good so far. My Wazza skills blow. lol
http://overclockaholics.com/forums/showthread.php?t=4926 ;)

[GFDuke]

I got wazza working. I got some real nice scores. But now its fuked up. When i start Pi after running Wazza the system gets all laggeed out like i have an OS without video card drivers. So i started running it without Wazza and got my best scores ever. It also helped that i dropped my multi to 54 and pushed up the bclk.

2nd place 2700k now. Idk if a good Wazza can shave off 10 seconds or not. But thats what i need for first.

http://www.hwbot.org/submission/2227170_gfduke_superpi_32m_core_i7_2700k_5min_55se c_234ms

[DOM]

Nice I'm trying to bench with the comp outside the window :laughing:

Trying some 3d.... card on stock cooler :P

But CPU is giving me hell

[GFDuke]

Oh.. coolness out side for sure. i thought you had a SS to bench with?

[Witchdoctor]

nice stuff Duke, just lkike riding a bike ,,,,,,,,,, :thumbsup:

woking an 8800gts 512 and some AM goodness

[DOM]

I only got one rig and to lazy to prep the mb and pull out the 775 rig

But rigs outside while I'm inside with the heater haha

And it seems I was using to much volts that's a first :rofl

But I have it outside for the gpu

Damn heaven dx9 is being a bitch it stops or makes it reboot fml

Can't wait till next yr I should be dept free then I hope to get a gpu pot and ln2 again lol

[Witchdoctor]

I just beat your 8800GTS 512 AM score ,,,,,,,,:keeporder:

[DOM]

whos ? mine ? fu :P :laughing:

[Witchdoctor]

:rofl

[DOM]

my score was gay anyways lol

so when you going to post the score on the bot :P

trying 03 its not liking it all

im about done comps being gay like u :taunt:

[GFDuke]

Just took 2nd in PiFast. I actually tied for first but he had better cpu speed i guess. idk how that works. I know i can beat that. Just have to go eat. lol I get him later.

http://www.hwbot.org/submission/2227197_gfduke_pifast_core_i7_2700k_12.73_sec

[Witchdoctor]

nice Duke

Think I just fried my GTS ............:ohcrap:

[DOM]

Oh noes... What king of cooling you running it on WD ?

[Splave]

this thread is awesome!

[Witchdoctor]

SS and air

Going to roll with some 01 next :thumbsup:

[DOM]

Okay this is my small contribution :blush:

on water/stock 28f outside:laughing:

http://www.hwbot.org/submission/2227250_domoca_unigine_heaven___basic_preset_dx9_g eforce_gtx_570_3940.98_dx9_marks?recalculate=true

http://www.hwbot.org/submission/2227253_domoca_unigine_heaven___xtreme_preset_dx11 _geforce_gtx_570_1730.92_dx11_marks?recalculate=tr ue

5937

5938

5939

5940

[Witchdoctor]

nice bro .............:thumbsup:

tearin it up in the am before the kiddies get up and the air is cold FTW

[DOM]

thanks, but the baby was the one making me get up all moring and now there all still alseep and im hungry :P

wait the lil pig is awake damn i can hear her, just need to make sure she dont see me :laughing:

[Witchdoctor]

Here's couple to add to the kiddy :thumbsup:

the 6200 is a beast ...... :laughing:

[MaadDaawg]

thanks, but the baby was the one making me get up all moring and now there all still alseep and im hungry :P

wait the lil pig is awake damn i can hear her, just need to make sure she dont see me :laughing:

Don't let the wife catch you talking like that DOM - it be funeral time at your house :laughing:

[Patch]

Tried a new card - lower GPU clocks, but higher memory gave me a little score bump.

http://overclockaholics.com/forums/attachment.php?attachmentid=5943&stc=1&d=1323027494

Think I'll revisit the Matrix. I thought it was a 1300 core card, but that was back when every card was a 1300 card because of my little lemon Antec HCP 1200 OCP problem...

[GFDuke]

lol. Nice work buddy.

[Splave]

nice benching all around

[MaadDaawg]

Working on Sp32 atm. Having a bitch of a time with the ram still. Should be good enough for something though. brb. I can do better. I just had to go to the doctors for my physical. lol

Bend over.. this might hurt a little bit :rofl:

Probably about time for a colonsoscopy too Bro :thumbsup: :laughing:

[GFDuke]

Bend over.. this might hurt a little bit :rofl:

Probably about time for a colonsoscopy too Bro :thumbsup: :laughing:

yea i had the colon-oscopy a few years back. i was good. Don't need another for 8 yrs. Whew I hated that shit. Did get the old finger up the ass prostate check though. :eek:

[DOM]

youy guys need to keep that in pm's :rofl

[MaadDaawg]

yea i had the colon-oscopy a few years back. i was good. Don't need another for 8 yrs. Whew I hated that shit.

Yeah I had one five years ago and made sure they doped me up real good. Told him I wouldn't be able keep still if he didn't ;) NOW my doc tells me I gotta get another one this year :thumbdown: Just give me drugs and I can handle it :rofl:


Did get the old finger up the ass prostate check though. :eek:

Yep, that was the "bend over this may hurt a little" routine I was talking about :rofl:

Hey, at least we don't need to get our tits sqeezed into pancakes every couple years :D

[GFDuke]

Or the old forceps in the ..... really dont want to say that word. lol

[Witchdoctor]

This thread is degrading quickly ...........:blink:

[HybridChiller]

have you tried bumping it with software ?

Edit:

Here is a monster a whopping 360 in 06 ....... :laughing:

Vmod, caps mod, untouchables mod, and subzero, give pain to that vga.

[Patch]

Took out my quad-sli frustrations on this poor li'l Matrix. Thought this card was a 1300 card last June -from OCP, not mount. I can't frickin believe how much time and LN2 I wasted using that stupid OCP-fraught HCP1200. :argh:

Not a bad Vantage. Even did a full Heaven run at 1450/1300 with really nice FPS - but froze exiting the bench back into explorer - grrrr. Nothing good happened after that. Will revisit another day....

http://overclockaholics.com/forums/attachment.php?attachmentid=5944&stc=1&d=1323044521

[GFDuke]

What are you using for a psu now?

[kikicoco1334]

hey broskis got a quick question, i just got this cheap ass 1600MHz Sector 5 from newegg early last week, and I popped that sumbitch in my rig it runs pretty great but when i lowering the timing from 9-9-9-24 to 8-8-8-24/21 it just kinda SLOW down a lot? like in 9-9-9 timing spi 32 it hits 0.11.15.232 and 0.11.33.359 at 8-8-8? also this ting can OVERCLOCK! lmao i have it running at 1866 @ 10-10-10-31 1T 143 right now so far it's pretty stable

why does it slow down so much when i lowering the timing, but when i overclock it it's fine?

Edit: just got done running spi 32 with 10-10-10-31 @ 1866 @ 1.75v and ending time is 0.11.06.***

This is a stander Elpida ic based ram

[Splave]

What are you using for a psu now?

I think he has every AX1200 available in the west cost lol!

[MaadDaawg]

Or the old forceps in the ..... really dont want to say that word. lol

:rofl::rofl::rofl:

[MaadDaawg]

Kiki, more volts


So Patch is the reason MC is charging over $300 a pop for the AX1200 :eek:

Just sent a turbo-cool 1200 to OCZ on RMA... prolly won't have it back for two weeks - FAIL

[kikicoco1334]

is it really that much harder for the same set of ram to run 1600@8-8-8-21 @ 1.80v then 1866@10-10-10-31 @ 1.75v? it'll run 1.7v as well just hair line slower

I am getting ready to get a cooling fan for my ram sets, cuz it really helps A LOT!

[GFDuke]

My first 3D01 Score ever submitted to the bot. wtf. I still can't believe i have never done this bench. i have alot of cards to run for this bench. lol

[Kal-EL]

122k is nice for 3D01 :D

[kikicoco1334]

My first 3D01 Score ever submitted to the bot. wtf. I still can't believe i have never done this bench. i have alot of cards to run for this bench. lol


don't feel bad bro, I may have to re-run 80~90% of my benches with the right (better) tweaks >.< :argh:

[Witchdoctor]

Crap, came home to my new monitor being dead, got my old one out booted and my OS is borked .......... WTF was going to play some 01 and try to get this run order thing down but now I have to RMA the monitor and load up a new image ........... :ohcrap:

I had good intension and now I just have a less than stelar additude ..... WTF


though I killed the 8800GTS ........... LOL but it lives on .......... :thumbsup:


Guess I will be back another day to finish up with this card

[GFDuke]

Crap, came home to my new monitor being dead, got my old one out booted and my OS is borked .......... WTF was going to play some 01 and try to get this run order thing down but now I have to RMA the monitor and load up a new image ........... :ohcrap:

I had good intension and now I just have a less than stelar additude ..... WTF


though I killed the 8800GTS ........... LOL but it lives on .......... :thumbsup:


Guess I will be back another day to finish up with this card

Thats a bad day. Sorry to hear that bud. :shock:

[Witchdoctor]

Yea no doubt .... on hold for an hour and fifteen at the egg for an RMA number and shipping lable ......... :thumbdown:

Guess the Xmas season is about .........

Grabbed my girlfriend a new lappy for Christmas .......... i5 w/ 555 nv mobil, blue ray and 1080P screen, almost got her a ROG but thought it would be a bit much to run Facebook ........... :laughing:

Obviously I will need to see what it can do ......... :thumbsup:

[Kal-EL]

Wut kinda monitor wuzzit?

[Witchdoctor]

Here is the POS

Streer Clear of the Samsung entry level stuff, just bought it because it wouldn't be a big deal if it got splashed with dice or ln2

http://www.newegg.com/Product/Product.aspx?Item=N82E16824001487

Started blinking and and I got my best GTS AM run off just on time before it went completly black :thumbsup:

[Splave]

im a huge acer fan :) cheap and still works after its sat in my freezing garage for a couple years :)

[Witchdoctor]

Will give them a try ........... 23" ACer LED's are reletivly cheap on the egg and Tiger :thumbsup:

[DOM]

just had my Samsung crap out started to blinking and would stop now it just dead, was using it in my kids room

now im thining of getting a 580 lighting and selling the 570 was going to get abother 570 wife gave the okay lol

but for gaming i run out of vmem at max settings on bf3 :P

y cant i be happy with what i got and not always want more :laughing:

[Witchdoctor]

Sell the 570 and grab 2x 560ti Hawks , they will be cheap as soon as the new 560 is released and will crush a single 580 in gaming as well as provide single card and dual card bointing options and max hardware and power points are obtainable.
:thumbsup:
Going 580 head to head with Al, and Joey could be tough as well as Patch if he lands that 1600Mhz beast he is looking for .......


:poke:

[Splave]

^tis the season to treat yourself ;)

[DOM]

Sell the 570 and grab 2x 560ti Hawks , they will be cheap as soon as the new 560 is released and will crush a single 580 in gaming as well as provide single card and dual card bointing options and max hardware and power points are obtainable.
:thumbsup:
Going 580 head to head with Al, and Joey could be tough as well as Patch if he lands that 1600Mhz beast he is looking for .......


:poke:i know i cant run with them no gpu pot to even try lol and 1gb are not going to help me when im maxing out the 1280MB on my 570 reason i didnt want another for sli cuz ill just have to lower the settings :(

^tis the season to treat yourself ;)
i was thinking x79 but you wouldnt hear from me anymore wife would kill me :laughing:

[Witchdoctor]

bummer ............ 3GB lightning extreme = high res gaming :thumbsup:

Man they had 5990's on sale for 3 bills last week on the egg

sold out now ;(

[Splave]

^saw that pretty sick

benching some 3870 x2 crossfire and 8800gts 640 x2 sli this morning in heaven dx9 and vantage. Getting those troll boints in... lol

[DOM]

Have u seen the price of the 3GB lightning extreme they have them at amazon for 7 bills + :eek:


Also with the snow there was 100 some accidents yesterday damn nubs :laughing:

[Splave]

Matrix 9600GT got modded this morning as well, running 850/1174 so far on air 1.25vCore 2.1vMem hits 34c in heaven dx9 lol Ran out of sliders in AB, gotta try another version.

[Witchdoctor]

Have u seen the price of the 3GB lightning extreme they have them at amazon for 7 bills + :eek:


Also with the snow there was 100 some accidents yesterday damn nubs :laughing:


yea they are out of their minds

if I were you I would be looking at 2x 6950 with 2GB vram

that will give you better than 580 speed with more vram than the standard 580\s

seen them used for about 220 as new ones roll at 260 each

[DOM]

yea they are out of their minds

if I were you I would be looking at 2x 6950 with 2GB vram

that will give you better than 580 speed with more vram than the standard 580\s

seen them used for about 220 as new ones roll at 260 each

It's to late I already order it.... Wife gave the okay didn't want her to change her mine :laughing:

And not a big fan of ATI

Picked up 2 sets those g.skill 2x4gb $30 each :) and i2400 so I can have the 2600k on the ss and have a daily rig finaly and don't have to use the q6600 when benchig anymore lol

Should have everything thursday night and my mb gig p67 back from rma

Now idk which mb I should bench with gene-z or ud5p67.....

[Splave]

gene-z ;)

[DOM]

Yeah I though so it oc like a boss for a matx mb lol

Also notice it let's me use 2v-core wtf lmao

Does more then 1.7v help it oc more ? Cuz that was the max on the ud5 ??

[Splave]

nope :) 1.725 is most ive used

Fattie mounted to 9600GT ln2 in the morning, testing a random 2600k I bought black friday in a bit ($299 on egg lmao)

[GFDuke]

Really thinking about doing some AMD stuff. But i have 4 Vertex 3's in my cart for my 6gbps RAID Card. Cause i want to pwn pcmark05. I havn't hit the buy button yet. hmmmmm
decisions.

[Witchdoctor]

Eff it buy both, it's Christmas .............. :laughing:

[Patch]

1500/1300 Vantage ----> Crack! in GT2

Heat up.

Crack!

Heat up.

Crack!

Argh.

[HybridChiller]

what crack ?
doesn't whant to ?

Only GT2 that he doesn't whant to run ?

[Splave]

1500/1300 Vantage ----> Crack! in GT2

Heat up.

Crack!

Heat up.

Crack!

Argh.

so are you ready for GTX-680 now? like me!? onward I say

[Patch]

Yeah, it's been a long time with these cards.

[Splave]

this matrix 9600gt is a beast lol cold slow at -56c but so far at 1037/1152 1.39v for vantage lol! should have used win7 32bit but oh well should have first within the hour.

[Splave]

http://i.imgur.com/PsHt7.jpg (http://imgur.com/PsHt7)
woot #1 :) fun too. xp on sandy next for other benches

[DOM]

cpu on air/water?

[Splave]

air, it will go higher but not necessary for this baby card lol

http://hwbot.org/submission/2228146_splave_3dmark_vantage___performance_geforc e_9600_gt_8192_marks?recalculate=true

[DOM]

y isnt it on the ss :P

and is the card on air also ?

[Splave]

y isnt it on the ss :P

and is the card on air also ?

no need lol more cpu gains me nothing except looking more l33t on hwbot which I dont care about lol

the card is on ln2 hence the 650 stock to 1033 overclocked core ;)

[DOM]

no need lol more cpu gains me nothing except looking more l33t on hwbot which I dont care about lol

the card is on ln2 hence the 650 stock to 1033 overclocked core ;)
then why did you put its on air :laughing: i know it had to be on ln2 but i notice alot of ppl on top 5 use ln2 but put stock or air lazy asses :P

[Splave]

I cant be bothered to click a drop down box you know that

[DOM]

You must have cuz u put air :rofl

Can't wait for my lighting tomorrow maybe next yr I can get a gpu pot haha

[Splave]

I loaded the last submission which was air and didnt change it to ln2

[DOM]

It's okay bro idc its just funny cuz I bet some ppl are like wtf how did he do that lol

[Splave]

haha your right ill change it

[DOM]

Leave it see if the one in 2nd says something :rofl

[Patch]

Ok, I'm satisfied with single card. Time to move on. Tried really really hard to get those 11 extra points to catch Smoke, but can't do it with this CPU. Catching Nick would be impossible.

http://overclockaholics.com/forums/attachment.php?attachmentid=5951&stc=1&d=1323332108

http://overclockaholics.com/forums/attachment.php?attachmentid=5952&stc=1&d=1323332108

[DOM]

still a nice score bro :clapping::good:

[Witchdoctor]

That is sick Patch ............ :thumbsup:

[GFDuke]

Super Duper job buddy.

[Splave]

Ok, I'm satisfied with single card. Time to move on. Tried really really hard to get those 11 extra points to catch Smoke, but can't do it with this CPU. Catching Nick would be impossible.

there is a pyramid of win in your cpu pot lol! nice work patchie hope to get my lightning up and running again sometime soon but am really enjoying HW benching lately :D

[Splave]

patch you play 06 yet? at 5ghz im getting 12.7k cpu scores lol 5.3 should be around 13.25!

Crosshair V formula inbound time to get dirty with the AMD boise

[Kal-EL]

Ok, I'm satisfied with single card. Time to move on. Tried really really hard to get those 11 extra points to catch Smoke, but can't do it with this CPU. Catching Nick would be impossible.

http://overclockaholics.com/forums/attachment.php?attachmentid=5951&stc=1&d=1323332108

http://overclockaholics.com/forums/attachment.php?attachmentid=5952&stc=1&d=1323332108

Oh man, sexy benching.

[Patch]

Thanks gents!

I briefly touched 06 and got 14K cpu score but initial proxy frames were so low I didn't want to waste the LN2.

[Splave]

well fuck...............lol sold 1 of my 3930ks on ebay.................and accidentally sent my better one! Damn! This one wont boot much of 5200mhz lol shit

[Patch]

Ouch

[GFDuke]

I blew up my freakin snowblower this morning. Fuk me. Didn't check the oil from last year. There wasn't any. $1,400.00 later. Fuk me. I hate winter.

[kikicoco1334]

hey pat, why is your F1EE looks different from my or everyone else's?
or is that even a f1ee?

[DOM]

hey pat, why is your F1EE looks different from my or everyone else's?
or is that even a f1ee?
its this custom made one

[Witchdoctor]

Aww man that suck man, no snow here luckily

I agree this winter shit is overated............. :thumbdown:

Had a tough week as well, glad it is soon over, have to go Christmas shopping tommorow :ohcrap:

[thebanik]

Ok, I'm satisfied with single card. Time to move on. Tried really really hard to get those 11 extra points to catch Smoke, but can't do it with this CPU. Catching Nick would be impossible.

http://overclockaholics.com/forums/attachment.php?attachmentid=5951&stc=1&d=1323332108

http://overclockaholics.com/forums/attachment.php?attachmentid=5952&stc=1&d=1323332108

wow, thats some damn nice work patchie....simply awesome.......

[Splave]

quick 100 points for the best bunch of guys I know :D

http://i.imgur.com/5E0Hg.jpg (http://imgur.com/5E0Hg)


http://i.imgur.com/3MCbO.jpg (http://imgur.com/3MCbO)
Proud of that one, took me all afternoon

[GFDuke]

NIce job the Splaver. Thanks for all you do bro. :thumbsup:

[DOM]

Wish I had a cpu like that nice scores :thumbsup:

[Patch]

Thx for the the support teamies.

And nice benching for the team, Splavious. Tonight's benching broadened my respect for your Heaven skills, bro.

This score has a lot of room for efficiency improvement, but pot cracking prevented any follow up runs. These clocks in heaven are a serious challenge. Lot of pot cracking, but have to keep voltage over 1.62 and temps lower than -175 throughout the bench.

Fun as hell, though. Benching hasn't been this fun in a while.

http://overclockaholics.com/forums/attachment.php?attachmentid=5953&stc=1&d=1323401980

[DOM]

What kind of Tim are you using on the card ?

Also nice score again :)

[Splave]

thats some nice frequency man! your killing it lately, any chance you can add some bclk helps a bit. But without 1350+ ram going to be hard.

Did you lap your best card and pot yet? all but stopped my shit from popping.

[Patch]

I haven't lapped this card yet. Didn't seem to help the 4 lightnings I lapped so I've been dragging my feet with the Matrix. I should lap it since temp and mounts are the real benching barriers.

Was using up the Taipei paste (in the small tubes) and switching back to Gelid seemed to help.

Might have some bclock room, but think I'll push memory first.

Damn. Already spent $370 on LN2 in the last 2 weeks and I'm on track to have to fill up again on Saturday......need another dewar.

[GFDuke]

Going to try My lightning and my Direct CU2 today for some SLI. IDK if it's gonna work and i can't afford any LN2 atm. But helll i've got the fuckin fever. I'll try anything. I wish my LN2 guy took credit cards. :eek: That would be dangerous.

Good news... I picked up a nice basement re-model job. Gonna turn it into a Family room, office, spare bedroom and a 1/2 bath. Should be some nice cash coming in on this one. But i can't start it until after the holidays.

I think some heaven and some 3D11 would be good for fun. After 3D01.

Whats the best os for them?

Oh yea, Expect some pc05 scores.

[Witchdoctor]

sounds like fun duke, I am installing new os from last week dibacle

hope to get a few benchies in before i have to go finish my christmas shopping :ohcrap:

tear it up bro can\t wait to see some of your epic PCM 05 results ..........:thumbsup:

Rock it out all, December has been a pretty active month for the Alliance
:clapping::clapping::clapping:

[Splave]

heaven and 3d11 = win7 x64

[thebanik]

heaven and 3d11 = win7 x64

how much difference to expect Splave between x86 and x64???

[Splave]

500+ 3d11 and 750ish heaven

[Splave]

http://i.imgur.com/WofJ5.jpg (http://imgur.com/WofJ5)

PS I went full retard. $299 2600ks on the egg maximum 5 lol maybe I'll try some amd shit this weekend after I bin these.

[DOM]

Patch pic is still better :laughing:

[thebanik]

http://i.imgur.com/WofJ5.jpg (http://imgur.com/WofJ5)

PS I went full retard. $299 2600ks on the egg maximum 5 lol maybe I'll try some amd shit this weekend after I bin these.

why dont I see a K after those 2600??? Ordered box full of wrong CPUs???? :P

[Splave]

hence the full retard mode ;)

[DOM]

Wow I didn't even notice lol trade you my 2400 for one haha I wanted a 25k but where sold out

then where back in stock in the afternoon :P but I can return mine for a refund it max out on the stock lil pos cooler :laughing:

[Gutterz]

http://i39.photobucket.com/albums/e166/staticx04/GEDC2031.jpg

I is back in the saddle again :) an you guys prolly thought I gave up. Well back to the drawing board, got to learn the platform an get ahold of my Ln2 guy to see if they still deal in it.

Microcenter wasnt going to let me pick my own cpu... bastards. But I got my way, grabbed the only C out of a bunch of A's

[MaadDaawg]

Don't forget to turn off the IGA or gpuz will display it as your primary graphics adapter :P

OMG, I'm turning into WD :rofl:

0hpqcpiLmoI

[Gutterz]

Lmao! I had Aerosmith stuck in my head.

[Splave]

GUTTERZ you're making my day bro, glad to have you back man. Missed ya!

[DOM]

I is back in the saddle again :) an you guys prolly thought I gave up. Well back to the drawing board, got to learn the platform an get ahold of my Ln2 guy to see if they still deal in it.

Microcenter wasnt going to let me pick my own cpu... bastards. But I got my way, grabbed the only C out of a bunch of A's:clapping: nice to have more benching :)

Don't forget to turn off the IGA or gpuz will display it as your primary graphics adapter :P

OMG, I'm turning into WD :rofl: on gpu-z you know the tab at the bottom you can change it from intel to the gpu :laughing:

benched the 580 on the stock cooler got 970@1.1v passed in 3dm11 but heven didnt like it :blink:

[DOM]

Okay going to prep the gene-z for the ss :)

and pulled out my ocz 700w psu and tryed to use it on the 580 it wouldn't boot in to Windows :rofl

[Gutterz]

Will the F1 mount to 1155? or do I have to get a new mount?

[DOM]

if it has 1156 it should work its the same as 1155

[Gutterz]

Thats good news, that means I got a water block too yay.
Thanks Dom I forgive you for shooting me in the head a dozen times :D

[DOM]

lol, i cant even play right now cant install drivers for the gig mb wont install on the install i did on the gene-z its worked before pos w7 :P

right now im freeing up a hd so i can bench with going to take 4hrs :Dizzy:

and its in the 20's outside and cant bench

[Gutterz]

I cant start benchin yet, I got to set up the bench cave an organize all my stuff. Then it will be all installs an learning all that I buried in my sub conscious. I just warned the girl Im dating that my inner monster is comming out lmao.

[kikicoco1334]

sweet baby jesus! y'all are crazy!

[Gutterz]

lol im not the one with the bunny ears on :jiggy:

[kikicoco1334]

......

changing it!

[MaadDaawg]

lol im not the one with the bunny ears on :jiggy:

and his bunny ears match his pink slippers too :clapping::clapping: :laughing:

[MaadDaawg]

I cant start benchin yet, I got to set up the bench cave an organize all my stuff. Then it will be all installs an learning all that I buried in my sub conscious. I just warned the girl Im dating that my inner monster is comming out lmao.

Jeez, my inner monster used to come out all the time before I was married :rofl:

[Gutterz]

married, what is this word you speak of?

[kikicoco1334]

http://www.laughparty.com/funny-pictures/Having-second-thoughts-89.jpg
^ Thank?

[GFDuke]

Gutterz...this is the bolt pattern for your F1 mounting.

You can Thank Kal for this. (http://kingpincooling.com/forum/showthread.php?t=488)

[MaadDaawg]

:rofl:

I remembered this but couldn't find it the first time I bolted my F1 to a mobo. I ended up taking all the mounting bolts out. laying the backplate up against the mobo, and putting the screws in one by one till it fit :rofl:

[thebanik]

Got around to benching 8150 with a pathetic mobo MSI GD80, does not have Core Control option or Load Line Calibration setting.

Hopefully will get a UD7 to test in the near future, but sadly no chance of getting Asus Crosshair

http://www.erodov.com/forums/imagehosting/904ee48eed3dc08.jpg

[kikicoco1334]

hells yeah bro!

[HybridChiller]

i saw you're post on eredov forum, when you get the 8Ghz border with bulldozer Thebanik ? :p

[Gutterz]

I want to try some of that AMD action looks fun

[Witchdoctor]

How does retail do against ES chips ?

[thebanik]

i saw you're post on eredov forum, when you get the 8Ghz border with bulldozer Thebanik ? :p

The board is crappy, no core control, so cannot disable modules, no load line calibration....but even with the right board it seems to me that the chip might not be much capable above 7.7-7.8Ghz, I might be wrong, crossing my fingers and hoping that, :D

I want to try some of that AMD action looks fun

I love AMD LN2 overclocking, you do not have to do much honestly, just keep pouring, no headache of CB or CBB, makes benching so much more fun, :D

hells yeah bro!

thanks kiki

How does retail do against ES chips ?

No idea honestly, but word on street is almost similar....

[OC Maximus]

Woah!!

Nice stuff there banik :thumbsup:

[Splave]

here is some air messing around last night
http://valid.canardpc.com/cache/banner/2146157.png (http://valid.canardpc.com/show_oc.php?id=2146157)

Going to bench a bit more 3d today for hw boints then I will put amd on ln2 when I have a bit more understanding of it on air.

Only changes I made in the bios was vcore for 4 ghz lol

[GFDuke]

Got 2 Celeron D 356's on e-gay today. One was 7 bucks the other was 9 bucks. lol

[Witchdoctor]

What board you sticking them on ?

[GFDuke]

My Asus A8N Premium. Unfortunately it's all i have. I don't think it has the voltage. Gonna see if thers a vmod for the board.

[Splave]

quick 125 team boints this morning chaps :)

http://i.imgur.com/oWUbj.jpg (http://imgur.com/oWUbj)

http://i.imgur.com/c9msR.jpg (http://imgur.com/c9msR)

http://i.imgur.com/Cw7zD.jpg (http://imgur.com/Cw7zD)

On to 9800gt This afternoon

[GFDuke]

Nice Splave. Is that 9600GT Vmodded?

[Splave]

yep its a matrix 9600gt with vGPU and vMem mods, the vdroop is crazy and i believe if I knew more about electronics it would be even better. 1.56v drops to 1.49v on load lol.

[Witchdoctor]

You make it look easy bro ........... :thumbsup:

[Splave]

^ but its really not lol I suspect alot of cheating in the hardware leagues. Im lucky to have this chip... Drivers seem to make a crazy amount of difference too

[Neuromancer]

My Asus A8N Premium. Unfortunately it's all i have. I don't think it has the voltage. Gonna see if thers a vmod for the board.

I flashed my old a8n-sli to a deluxe, that had more options. Might be able to do the same thing :)

[GFDuke]

I flashed my old a8n-sli to a deluxe, that had more options. Might be able to do the same thing :)

LOl I'm dumb as fuck. The Celerons are S775 not 939. I'll have to get out the 780i. I have a A8N Deluxe and a A8N Premium for 939 and i found a vmod. Now i gotta go buy some 939s. lol

[kikicoco1334]

I got a DFI 939 board and I am super excited to freeze with LN2 didn't seem to do much under dry ice, but now I got the IHS removed [SHOULD] clock a little better. Key part SHOULD!

Also my NF7-S v2.0 it's been sitting there looking at me. I need to find a way to dock my F1EE or the baby F1 G on that sum'bitch
Would the F1EE be too heavy for the chips don't have a IHS on it? Cuz I have cracked a die or two in my time ..... >,.,<

[Splave]

got my GTX8 ram in its pretty :)

[Witchdoctor]

^ but its really not lol I suspect alot of cheating in the hardware leagues. Im lucky to have this chip... Drivers seem to make a crazy amount of difference too

I agree, we need to start a Sanctum thread with drivers used for 32 and 64 bit seperated by series and bench so we all are using the best possible driver for each bench to maximize team boints as I was benching a few weeks back using different drivers for almost each bench with a 4870X2...........

Posibly testing a GPU stock clocks and setting a static CPU speed for each socket to rate them so all posts are on an even playing field, over time we could come up with the best possible drivers ..... now I basically look at what the top guys are using but it is squed due tother clocks, I have been looking at the lowest clock in the top ten to bin drivers as it were

[DOM]

I agree, we need to start a Sanctum thread with drivers used for 32 and 64 bit seperated by series and bench so we all are using the best possible driver for each bench to maximize team boints as I was benching a few weeks back using different drivers for almost each bench with a 4870X2...........

Posibly testing a GPU stock clocks and setting a static CPU speed for each socket to rate them so all posts are on an even playing field, over time we could come up with the best possible drivers ..... now I basically look at what the top guys are using but it is squed due tother clocks, I have been looking at the lowest clock in the top ten to bin drivers as it were

That's a great idea but I don't got that much time to test it would take me months just for one card lol

But having more then one test one card can speed it up :)

[kikicoco1334]

got my GTX8 ram in its pretty :)
those are the 2400mhz tall boys right?

[Kal-EL]

NO! For real?

[Gutterz]

I need more practice, wazza an some LN2 action

Garbage submission to see where Im at on the ladder

http://i39.photobucket.com/albums/e166/staticx04/Overclocking%20%2012-12-11/1mpi.jpg

[kikicoco1334]

Just got my DFI 939, Biostar 478 and my Nf7-s boards insulated and now just waiting on a day where i can go pick up some LN2

[GFDuke]

[QUOTE=Gutterz;87491]I need more practice, wazza an some LN2 action

Garbage submission to see where Im at on the ladder

Buddy, no need for Wazza on 1M Pi. Looking good, keep at it.

[Splave]

looks good guttz

kiki yes they are the 2400mhz sandy kit :) nothing special though it seems

[MaadDaawg]

got my GTX8 ram in its pretty :)

How's it working out for ya?

Oops.. never mind :laughing:

[Splave]

35 bro boints all golds on stock cooler lol no mods. Goes to show what proper drivers and settings will get you.

http://i.imgur.com/KnSIt.jpg (http://imgur.com/KnSIt)
http://i.imgur.com/qZfec.jpg (http://imgur.com/qZfec)
http://i.imgur.com/dSwmo.jpg (http://imgur.com/dSwmo)
http://i.imgur.com/xbnjj.jpg (http://imgur.com/xbnjj)
http://i.imgur.com/ix5Et.jpg (http://imgur.com/ix5Et)

9800gt next

[Witchdoctor]

Nice

Hardware mode FTW .............. :thumbsup:

Dam Al, like I said, you make it look easy bro.......... :)

Benching a Chrismas build for a guy at work this morning ..........

pretty cool little gamer that boots at 57, wish I had more time with it

[Splave]

that thing looks sick man

guys we are 1000 boints out of the top 10 lets do this bitch

[Witchdoctor]

hell yea I have a few SS in the kitty

[GFDuke]

Nice tweaking there Al. I wish i could take my pc to work and bench . looool You are soo good at this you make me envious. I'll get some time in with some more junk this weekend.

[Witchdoctor]

1WqazleR3FE

[GFDuke]

LMFAO We Have a Sanford and Kid place here in town. They go around buying out contents of hmoes and selling the stuff at their place.

[Splave]

ocp/droop modded 4x 8800 series cards today. pretty challenging little smd 1.2k resistors in parallel.

http://i.imgur.com/e5EmY.jpg (http://imgur.com/e5EmY)

now i can run 1.6v on water :) and droop bwent from .1v+ to .035v ftw

[OC Maximus]

^you da man^

[DOM]

got this on air :)

http://valid.canardpc.com/show_oc.php?id=2153192

[Patch]

Very nice chip DOM.

[DOM]

Thanks need to see what it does on the ss it was sitting at 50c lol

Just got done playing some bf3 took forever to finished :P

[Witchdoctor]

got this on air :)

http://valid.canardpc.com/show_oc.php?id=2153192

just built a gamer for a guy that booted at 57 on a FRIO

only had about an hour to play with it though :ohcrap:

2500\s Rock

[Gutterz]

So I did my first SB Ln2 session last night an it was a complete fail. I know SB dont scale on Ln2 that much, but I wasnt able to beat anything I did on air. Raising vcore, vccio or cpu pll
didnt help. It seemed like the cold handicapped me. The mount was good upon taredown, that was my only suspension of what could have been the issue.
So can you have a crap chip that max's out on air?

[DOM]

just built a gamer for a guy that booted at 57 on a FRIO

only had about an hour to play with it though :ohcrap:

2500\s Rock
i can boot in the bios with x58 but idk how high i can get it to make it in windows untill i get it on the ss :D im just on a 212+ evo :laughing:
So I did my first SB Ln2 session last night an it was a complete fail. I know SB dont scale on Ln2 that much, but I wasnt able to beat anything I did on air. Raising vcore, vccio or cpu pll
didnt help. It seemed like the cold handicapped me. The mount was good upon taredown, that was my only suspension of what could have been the issue.
So can you have a crap chip that max's out on air?in my experience yes, on my 2600k i cant get 5.6 unless its on the ss but on water i can get 5.5

so its not much more oc i can get on cold

on the ss i can run 4c8t on water i cant so thats the big advantage

[Splave]

Hey gutters what temps?

I use
1.685 core
.85 vccsa
1.125 vccio
1.5 vpll
1.75 dimm

Right around -30c on ln2
What kinda codes you getting?
Sometimes it will say oc failed but will keep the speed and press f1 to bios then esc out without saving changes and it boots.

[Gutterz]

I tried from -15c to -90c I didnt notice any codes when it says OC failed.
It does a OC fail once every boot cycle maybe twice but then will boot with same settings run fine then. That can happen even on a 4200mhz overclock too not just max clock.

These are my max air settings
104 bclock
54x
vcore 1.57
vccsaio 1.11875 vccsa an vccio are tied together on the z as far ad I read. ???
Dram 1.65
cpu pll 1.8125

Here is a bios shot of the Digi VRM/Power tab are these rite?
http://i39.photobucket.com/albums/e166/staticx04/Overclocking%20%2012-12-11/111218110708.jpg

http://i39.photobucket.com/albums/e166/staticx04/Overclocking%20%2012-12-11/111218110649.jpg

The rest of my settings

http://i39.photobucket.com/albums/e166/staticx04/Overclocking%20%2012-12-11/111218105521.jpg

http://i39.photobucket.com/albums/e166/staticx04/Overclocking%20%2012-12-11/111218110759.jpg


Tried auto on skew driving voltages to

[MaadDaawg]

definately want to enable the extreme tweaking.

I also enable my bandwidth booster though I don't know if it helps or not :Dizzy:

[Gutterz]

definately want to enable the extreme tweaking.

I also enable my bandwidth booster though I don't know if it helps or not :Dizzy:

I usualy do have extreme tweaking enabled. But that only enables the tool from windows to work correct?

[Patch]

Gutterz, try this:

D/C overtemp protection
Lower your vpll to 1.5-1.65v
Increase dram to 1.7-1.75v+
Increase PCHv to the first yellow or the hightest white level

[DOM]

Nice B-Day for ME :D

i set 57 and 59 came out :laughing:

5997

[Gutterz]

nice DOM!

Pm sent Patch.

I think I may have a bit of an issue. I cannot run 32m at any setting even stock clocks it just hard locks.
tried new installs an exsisting, tried differant ram too. Any Idea what would cause that? I can run all other benches but 32m at stock clocks or overclock. Bad memory controller?

[MaadDaawg]

Nice B-Day for ME :D

i set 57 and 59 came out :laughing:

5997

Bastard :rofl:

[Gutterz]

Replaced the processor with a new one an all is well with 32m now. Runnin Linx now with no problems, the other chip would hardlock soon as I started linx. Im very disappointed in Shitty bridge
I didnt over volt anything except the vcore, my last air runns were loopty an failed 32m when I was playing with Rog morning before I got Ln2. Just though my vcore was to low since I was seeing how little volts it took for 4 Ghz. Oh well maybe just a shitty chip...

[Patch]

5.9? Yes! Take advantage of that CPU.

Finally did some quad-sli. Need a better CPU. Story of my life with quad sli.

http://overclockaholics.com/forums/attachment.php?attachmentid=5998&stc=1&d=1324254656

http://overclockaholics.com/forums/attachment.php?attachmentid=5999&stc=1&d=1324254656

http://overclockaholics.com/forums/attachment.php?attachmentid=6000&stc=1&d=1324254656

http://overclockaholics.com/forums/attachment.php?attachmentid=6001&stc=1&d=1324254656

[GFDuke]

Just saw those scores on the bot Patch. Super Duper job brother.

[Splave]

Sicknes patch, nice chip Dom!

[Witchdoctor]

yea man, that is insane bro ........... :thumbsup:

Here's a o1 score

[DOM]

nice runs guys going to fire up the 2500k in a bit :D

also did this before turning it off for my lil party with the fam

http://overclockaholics.com/forums/attachment.php?attachmentid=6003&stc=1&d=1324257372

[Patch]

Nice. 01 is gobs of work, ain't it?

Thanks guys. Should help the team some if they ever get around to awarding my WR boints.

[Witchdoctor]

hell yea we should be rolling up on MADSHRIMPS soon :thumbsup:

yea, fun though, need some cold on that gpu to go for a cup