November Bench thread OCA [Archive] - Overclockaholics Forums

Dentlord

10-31-2011, 04:40 PM

Look guys, I'm actually benching for once!

Sorry for being such a slacker lately!

Tonight I was workin' out this lightning ... its not stellar but not crappy.

I'm getting to use my SS again too, my sandy loves around -50c

kikicoco1334

10-31-2011, 06:25 PM

OMG IT'S DENT!!!
welcome back dent!

nice card and chip!

HybridChiller

11-01-2011, 01:15 AM

Damn, Dent beat me to it to be first hahahaha.

nice scores there Dent

Dentlord

11-01-2011, 02:49 AM

Thanks Kiki and HC :thumbsup:

Having fun again, thanks to Taipei.

Gonna have to dig out the x58 and run some vantage ... I think Sandy should be ok for 06, gonna try that tonight, as well as am3

HybridChiller

11-01-2011, 02:56 AM

sandy is very good for 3d01, 3d03 and Aq

Splave

11-01-2011, 04:07 AM

nice dentie!

Witchdoctor

11-01-2011, 05:26 AM

Nice work Dent,

Good to see you around, Hope all is well ......... :thumbsup:

MaadDaawg

11-01-2011, 06:30 AM

Nice to see the sequel has finally been released -

"Retun of the Lord of the Dents"

:D

welcome back bro ... not I gotta put us some numbers too, I've been a real slacker that past year :blush:

HybridChiller

11-01-2011, 07:31 AM

tomorrow is my day, hope it will be good lol

Patch

11-01-2011, 10:51 AM

Nice to see you benching Dentman!

Clock for clock, Sandy comfortably beats gulfie in 06. But 5.8 SB still can't beat those folks with 6.3+ ghz gulfies.

HybridChiller

11-01-2011, 11:01 AM

just a submission blocked because not enough verification, WTF ?

it was with verification link :

http://hwbot.org/submission/2218170_hybridchiller_3dmark03_radeon_9200_3377_ma rks

Was first place with this

Dentlord

11-01-2011, 12:09 PM

75 liters and SS in the hotel and ready for action lol

http://overclockaholics.com/forums/attachment.php?attachmentid=5854&stc=1&d=1320181690

Witchdoctor

11-01-2011, 12:14 PM

Ahhhh Hell yea ................... :thumbsup:

kikicoco1334

11-01-2011, 12:37 PM

oh dear lord! 75L!

wait why in a hotel? @.@

Dentlord

11-01-2011, 12:47 PM

oh dear lord! 75L!

wait why in a hotel? @.@

I'm pretty much always in a hotel since I travel for work lol .... what the maids must think!

HOWEVER

My lightning is dead :ohcrap:

Went to fire up the rig and no video signal, stuck at vga .... put in old card and worked fine soooooo byebye lightning .....

MC has 2 in stock just down the road :thumbsup: might get to bench tonight after all

HybridChiller

11-01-2011, 01:15 PM

lol, you and me benching tomorrow ?

To bad of you're lightning man, it's a shame it dead.

Dentlord

11-01-2011, 01:24 PM

lol, you and me benching tomorrow ?

To bad of you're lightning man, it's a shame it dead.

Looks like it, good luck!!

I'll see if this card comes back to life after a nice toasty oven visit, but I should pick up another lightning anyway :D

kikicoco1334

11-01-2011, 02:18 PM

I'm pretty much always in a hotel since I travel for work lol .... what the maids must think!

HOWEVER

My lightning is dead :ohcrap:

Went to fire up the rig and no video signal, stuck at vga .... put in old card and worked fine soooooo byebye lightning .....

MC has 2 in stock just down the road :thumbsup: might get to bench tonight after all

NOOOOOOO!!!!!!!! :shock:
do lighting die easy?
i am trying to get a lightin xtreme but they are like $600 ea

i love traveling but the way you are doing it just took it to a whole different level!
LN2 some hardware in the room like a boss

Splave

11-01-2011, 02:55 PM

extreme version sucks, ram wont go over 1200 lol

HybridChiller

11-01-2011, 03:09 PM

they say if you put like 1.6vGPU they can die.

For the rest, the only thing i had of Lightning was the 5870, and i was not happy with it, back to nVidia.

I'm addicted the Classified and now i'm starting to do some Untouchables vga mods and benching to

HybridChiller

11-01-2011, 03:09 PM

take a Classified instead man :clapping:

Patch

11-01-2011, 04:42 PM

Hope that lightning isn't really dead.

Sometimes when fiddling with DMM probes and plugging in the power plugs I tilt the front of the card out of the PCIE slot enough that I don't get VGA on boot. Thought I killed several cards over the last few months.....with miraculous resurrections. :blush:

HybridChiller

11-01-2011, 05:10 PM

i hope i don't kill anything, i would go crazy !!!

Neuromancer

11-01-2011, 05:12 PM

Hah hah nice pics man!

Does room service bring your LN2 for you? If not, do you ever get asked if you are making a bomb or have the cops called on you?

Splave

11-01-2011, 07:29 PM

Dentlord

11-01-2011, 07:38 PM

Hah hah nice pics man!

Does room service bring your LN2 for you? If not, do you ever get asked if you are making a bomb or have the cops called on you?

I bring the dewars in on one of those luggage carts lol and yeah they get nervous as hell when I tell them what it is ... everyone thinks its gonna explode or something.

The card is alive! I took it apart and used a heat gun to dry it out thoroughly, and its all good ... had to be moisture its so friggin humid here, the card is dripping wet every time I bench. I'll see if it still clocks tomorrow.

Splave

11-01-2011, 07:47 PM

^nailed it lol glad to hear

OC Maximus

11-01-2011, 08:03 PM

Now that's a hardcore hotel pic Dent, lmao.

Glad to hear the lightning is still alive.

HybridChiller

11-02-2011, 01:43 AM

I bring the dewars in on one of those luggage carts lol and yeah they get nervous as hell when I tell them what it is ... everyone thinks its gonna explode or something.

The card is alive! I took it apart and used a heat gun to dry it out thoroughly, and its all good ... had to be moisture its so friggin humid here, the card is dripping wet every time I bench. I'll see if it still clocks tomorrow.

I putted petroleum jelly (vaseline) now on the complete GTX580 Classy, it's nasty and sticky, but no condens, water or anything else is possible to get in small places.

I putted it on 3mm thick and then with hairdryer i melted it a little bit, so it goes in the small hole and under chips.

After just clean it with Brake cleaner of the car, no residu is left and vga still works. :blush:

Kal-EL

11-02-2011, 04:21 AM

75 liters and SS in the hotel and ready for action lol

http://overclockaholics.com/forums/attachment.php?attachmentid=5854&stc=1&d=1320181690
:shock:

Splave

11-02-2011, 07:43 AM

donkey schlong evap equiped lol

played 32m this morning with perica VIA skype :) had some fun, memory acting funny hope one of my sticks isnt going :X

Bulldozer 8150 and CVF here by the end of the week

Dentlord

11-02-2011, 09:51 AM

ROFL donkey schlong indeed, I had Drew make it massively long to compensate for my short ... comings

The card clocks fine, heaven at 1400/1300 got me like 2520, then I popped the paste and shut er down...

Second lightning is sitting there begging for a fatboy :D

kikicoco1334

11-02-2011, 03:39 PM

Hey everyone, there is another BOT thing this month it's AMD K5 and up!

it's CPU-Z so i am doing Athlon XP Socket A based

SOME ONE PLEASE DO A 8GHZ in here

Dentlord

11-03-2011, 06:10 AM

about to test the new lightning cold right now, fingers crossed!

Splave

11-03-2011, 06:34 AM

get it dent :) 32m this afternoon for me. Really looking forward to it too.

Dentlord

11-03-2011, 08:57 AM

get it dent :) 32m this afternoon for me. Really looking forward to it too.

Tear it up bro! :thumbsup:

The new card is good, went right up to 1500 in 3d11 at 1.52v, beyond that I was hitting OCP so I warmed it up and did the mod. The mem is weaker, itll barely run 1250, but maybe the core will be enough to make up for it. Onward and upward!

http://overclockaholics.com/forums/attachment.php?attachmentid=5873&stc=1&d=1320342964

HybridChiller

11-03-2011, 08:59 AM

GTX285 + Untouchables :

Aquamark 6de plaats : http://hwbot.org/submission/2218502_
3Dmark03 10de plaats : http://hwbot.org/submission/2218500_
3Dmark05 7de plaats : http://hwbot.org/submission/2218496_
3Dmark06 9de plaats : http://hwbot.org/submission/2218474_
3Dmark Vantage 5de plaats : http://hwbot.org/submission/2218499_

some CpuZ scores :

6785Mhz : http://hwbot.org/submission/2218641_
2th place 6210Mhz : http://hwbot.org/submission/2218655_
67th place : 3936Mhz : http://hwbot.org/submission/2218657_

Dentlord

11-03-2011, 09:01 AM

Damn nice work there HC!!

HybridChiller

11-03-2011, 09:02 AM

Look at the voltage of the 6210Mhz submission hahahahahahahaah

and i really love that Untouchables full pot -180°C + 1.6vGPU +1000Core no ocp or anything else, just fun, needed more powerfull cpuZ

Neuromancer

11-03-2011, 09:56 AM

Nice job Chillah

Dentlord

11-03-2011, 12:37 PM

OCP helped but not a lot .... broke 12k in '11 finallyyyyy ...

AND got this 180k in 03 :)

http://overclockaholics.com/forums/attachment.php?attachmentid=5874&stc=1&d=1320356185

DOM

11-03-2011, 12:41 PM

:thumbsup:Nice work dent and hc

Splave

11-03-2011, 12:47 PM

good work guys, 32m results :D not bad. x57 tomorrow with more ram speed.

Dentlord

11-03-2011, 12:53 PM

Holy moly nice Splig .... got any good ram for sale :D

HybridChiller

11-03-2011, 01:02 PM

my Classified wouldn't work under ln².

If any OC i applied cards crashes. Even 100Mhz OC.
On Dice it worked good @ 1150Mhz but now it didn't whant to do anything.
As stock clocks it was stable as hell, but minor OC boom.

So no freaking results on ln² with classified's.

That's a real shame.
Need to get a fatpot some day when i have the cash.

Splave

11-03-2011, 01:22 PM

Holy moly nice Splig .... got any good ram for sale :D

nothing that good lol, test 8 more sticks of Dom's tomorrow will let ya know :)

Patch

11-03-2011, 01:58 PM

Tearin it up as usual Hybrid and Splave.

Nice freakin 03 Dentmaster.

You guys are making me want to lap some heatsinks and try for 1600 again....

MaadDaawg

11-03-2011, 02:01 PM

Awesome clocking Bros... I am sooooo envious :D :laughing:

HybridChiller

11-03-2011, 02:04 PM

go for it Patch, don't hesitate

kikicoco1334

11-03-2011, 04:47 PM

y'all are all kicking ass there!
that's awesome!

Splave

11-03-2011, 05:25 PM

8gbs are working at 7-8-7 so far w00t finally

kikicoco1334

11-03-2011, 06:20 PM

NICEEEEEE!!!!!!!

Dentlord

11-04-2011, 03:16 AM

OMG I'm so frustrated this morning!!!!!!!!!!!

Started running Vantage, chip at 5.8 and card at 1400 ... no problem first run over 43k ... moving up on the card, itll pass much higher, and I cant get the cpu to pass!

Wasted some really good gfx scores crashing the cpu before I finally gave up and shut down.

On the plus side I did improve my vantage by 1000 points, but damn what I could have done

Splave

11-04-2011, 04:49 AM

hmm i had that before too bro, ended up having water in my socket :( try really drying it out for a bit. I think I ended up reinstalling as well

Dentlord

11-04-2011, 01:56 PM

Just for kicks I bought another 2600k at MC today, and failed lol .... 54x max multi and 5500 max mhz ... blah

Patch

11-04-2011, 02:23 PM

Crazy man. You'll have to buy 100 of those suckers to beat the cpu you have now.

I''m thinking of selling the MIVE's and my 5.8 chip to buy more PSUs and start binning SB-E's.

Got 4 cards on the brain again......

Dentlord

11-04-2011, 05:42 PM

134921 '01 and 458k am3 tonight farting around ... soooo close to passing 03 at 1600 core, gotta figure out the perfect voltage to get through trolls and im set.

Neuromancer

11-04-2011, 07:22 PM

quick SandY B question for you pros...

BCLK I can not seem to get past 102.7 bootable and ROG connect does not let you BCLK for somereason. Well not in diagnostic mode at least LOL

So I thought I would up the BCLK, and then multi up while in windows to 55x (from 54x)

Instant lockup.

Not to mention 102 BCLK booting at 54X puts me at 5.5 and is just not stable enough for benching. I tried adjusting the skews down like it says in BIOS, even all the way (although did not try positive skew, or for that matter positive skew voltagE)

so is there something I am missing for BCLK ability? Or is that "binnable" too like multis? Or is it that the 55X muli limit (for my chip) is there because that is seriously the limit of the chip?

got my 2D benching done with, but was thinking once I am running a fuller OS for 3D benching I might get the BCLK clocking working via ROG connect, and if I can get 5.6 it would help alot in some of the apps.

Patch

11-04-2011, 08:35 PM

Try low pll. I typically use 1.5v. Sometimes up to 1.6. Definately lower than stock most of the time.

Make sure your ram isn't going too high with the multi. But you already know that.

Try shooting past a bit to jump a "bclock hole". They don't happen as dramatically as cedar mills and wolfdales sometimes did, but they do occasionally exist..

It's probably a wall though. And unlike 1366 clocking, post boot overclocking either doesn't work, or doesn't get you further.

My general experience is that SB can pretty much bench anything near its max boot cpu validation if you can keep temps reasonable.

Dentlord

11-04-2011, 10:43 PM

You can also try low SA and IO voltage, like .85v SA and 1.0v IO (or lower even) ... I think in Taipei we were only at 1v IO for 109 bclk.

However, the wall is the wall if its the overall limit of the chip, at 104.0x56 I can run wprime 1024, but 104.1 will not boot, nor can I set it in ROG lol

MaadDaawg

11-05-2011, 06:36 AM

.. we don't need no education ....

yeah, the fuckin wall. My chip hits it at 51 :thumbdown: Gonna try a few more things cause I gotta save my money for 2011. Hoping something will break this week and I can buy both a new 2600K and the new socket & chip.

Might have a job with my ex companies main competitor .. will know more Monday :shock:

Neuromancer

11-05-2011, 09:08 AM

Thanks for the tips guys, did not think to try lower SA/VTT but on this board they are one and the same

I tried try dropping iGPU voltage down too, will give low VTT and BCLK jumping a try. My 2600 (nonK) I can get to around 104.5 IIRC, and ASUS autotune sets this chip to 103.5 after trying up to 104. something... but I cant physically set that high a BCLK at high multis

Splave

11-06-2011, 11:11 AM

got 2 sets of these coming, little birdie says PSC is the ram for x79
http://www.amazon.com/Transcend-aXeRam-GB-PC3-19200-TX2400KLU-4GK/dp/B00422H6YU

Patch

11-06-2011, 12:16 PM

^^ Thank you sir.

Neuromancer

11-06-2011, 12:23 PM

Good to know. If nothing else, run those sticks on auto settings and see where it puts your subtimings, and then you could pop in your hypers and loosen them up a little bit there but still keep your tight mains.

Kids are gone, so I nlited an XP OS. stripped out all non essential stuff but left all 3D and media related stuff in as well as most of the networking.

Need to look up a couple of more tweaks, going to try leaving it in IDE mode instead of AHCI, might hurt storage performance, but should reduce CPU load. In theory at least :) )

running out to get a 12 pack now and then on to installing.

Dentlord

11-06-2011, 01:42 PM

Found a little more life in my 2600k, 5850 got me over 135k in '01, and with 1600 core on the lightning, got me 181697 in '03 :D

Turns out SB isn't horrible for 05 either, I got my best score today, 5850 on my SB beating 6300 on a 980x lol (53696)

GFDuke

11-06-2011, 02:11 PM

Awesome chip Dent. Great clocks for sure. Who would have though a quad core could beat out a 6 core at that speed.

Neuromancer

11-06-2011, 02:45 PM

Very nice Dent.

Splave

11-06-2011, 04:27 PM

Nice work dent, glad your back full force

what kinda voltage you working at for that 03? trolls are pwning me last time i tried

Dentlord

11-06-2011, 04:55 PM

Nice work dent, glad your back full force

what kinda voltage you working at for that 03? trolls are pwning me last time i tried

I downclocked to 1575 for one spot in trolls that was giving me hell, and then again at the end of nature when I got paranoid that it wasn't gonna finish lol

1.6v and -160 for the whole thing

Splave

11-07-2011, 07:40 AM

Great work bro!

Dentlord

11-07-2011, 04:34 PM

Thanks!

Rockin' all I can get from my loose ram tonight in 32m lol

http://overclockaholics.com/forums/attachment.php?attachmentid=5877&stc=1&d=1320719643

kikicoco1334

11-07-2011, 04:41 PM

Holy balls dent! you have made more boints in the last week or so than me for the last 2 years!

Rock out dude!

Splave

11-07-2011, 05:35 PM

Beautiful run bro great bclk

Patch

11-07-2011, 05:48 PM

Yikes, Dentman. Beautiful clocking there.

You're about to take the US.

Dentlord

11-07-2011, 06:07 PM

Thanks!!

Trying 54x now, its gonna take 108.3 bclk though :s not sure thats gonna happen.

EDIT:

Yeah not quite, got to 5810 (107.5x54) but that was all, so I might be tapped in 32m till I get some better sticks.

Splave

11-08-2011, 02:58 AM

woot axeram will be here today, im convinced some good PSC/hynix? can overtake hypers in 32m on sandy from sheer mhz. we'll see

Neuromancer

11-08-2011, 07:44 AM

Good luck splave,

Nice run Dent!

I just posted up my latest 2D last night, not many points, fortunately no one seems to be able to tweak 32M in the 5.5 GHz range so despite my crappy sticks I still managed to place pretty well so I did get a couple :) going to have to rework my others though.

Witchdoctor

11-08-2011, 09:01 AM

LOL............. that's me ..........
Can't wazza to save my life

Splave

11-08-2011, 09:27 AM

new ram here, going to test in a bit. very impressive HS and weight on these. one of these weighs more than 2 dom gt'2 combined lol.

we'll see, they are single sided hynix h5tq2gb3bfr-h9c which is popular these days on 4gb 2133 kits perhaps thats how they pull such speed on a 2gb stick.

http://i.imgur.com/TFIof.jpg (http://imgur.com/TFIof)

http://i.imgur.com/M7yN2.jpg (http://imgur.com/M7yN2)

OC Maximus

11-08-2011, 10:06 AM

Hope they "transcend" your expectations :)

Splave

11-08-2011, 02:17 PM

Neuromancer

11-08-2011, 04:01 PM

welll the ram is just as stated, problem is 2400 strap is broken on retail SB chips lol only works on ES so Im limited to bclk at 2133 strap, 105 seems to be my limit on air temps. Timings are like stone at 9-11-9-27.

Did not know that. explains why I couldnt get 2400 to work for me even at 11-11-11 on my BDBGs.

http://www.xtremesystems.org/forums/showthread.php?268000-Gskill-F3-12800CL7D-8GBXH-Memory-IC&

Sloppy timings but incredible speeds at low voltages.

EDIT: oh and FYI its most likely h5tq2g83bfr-h9c Not GB3BFR

Linky (http://www.hynix.com/products/computing/computing.jsp?info.ramCategory=computing&info.ramKind=19&info.eol=NOT&posMap=computingDDR3)

Patch

11-08-2011, 05:04 PM

Splave

11-08-2011, 07:13 PM

9 11 9 27 didn't test further

HybridChiller

11-08-2011, 08:21 PM

nice mem there Splave.

I'm working now for a benelux contest with a Msi 6670 1gb,
contest goes about GT2 of Vantage, most FPS.

It's a vga without any PciE connectors, so OC is limited by power from PciE slot of mobo.

so i will use the untouchables on it lol, max stable clean power, now the question is will my noob mod work on it, and will the vga OC good ?

some people say 6670 has CB @ -5°C

http://nl.hardware.info/nieuws/25172/hardwareinfo--oth-gpu-overklok-competitie-schrijf-je-in!

Splave

11-09-2011, 03:02 AM

purchased 2 sets of this :)
http://www.amazon.com/gp/product/B0033BXYJW/ref=ox_ya_os_product

BBSE for sure, I figure its good to have 1-2 good sets of each IC. Just need PSC now

Neuromancer

11-09-2011, 08:49 AM

going to start calling you reefamadness if you keep collecting ram sticks LOL he collects RAM like its a disease.

Patch

11-09-2011, 09:09 PM

You are the raminator for sure.

Found my other missing PSC's while rummaging through the shed for furniture felt pads. :)

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231444 (http://www.newegg.com/Product/Product.aspx?Item=N82E16820231444)

and

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231454 (http://www.newegg.com/Product/Product.aspx?Item=N82E16820231454)

Too bad I only have 2 sticks of each.

Witchdoctor

11-10-2011, 12:39 AM

I have a set of the secon cas 7 set only in the 2133 flavor

These have diapeared too for some reason ....... ?

Splave

11-10-2011, 08:49 AM

hehe getting better ;)

Dentlord

11-10-2011, 05:47 PM

Niiice run!

Splave

11-11-2011, 03:41 AM

thanks bro! 8gb testing today thanks to romdom letting me borrow his 6gb kit rofl

HybridChiller

11-15-2011, 07:26 AM

running my 4870X2 Gainward Rampage Goes like Hell vga again before i sell it,
http://www.ocaholic.ch/xoops/html/modules/smartsection/item.php?itemid=233 :

Scores for now, just need to do Vantage again :

Aquamark 8th place http://hwbot.org/submission/2221551_
3d05 27th place : http://hwbot.org/submission/2221530_
3d06 21th place : http://hwbot.org/submission/2221529_

Let my compressor cool down of running all day for benching, tried 5 different drivers for 4870X2 to maximize point and scores.
You different driver in each score lol :p

now tonight just running Vantage and it's done again for today, next week the Msi 6670 contest where i'm going to use the untouchable on it.

HybridChiller

11-15-2011, 10:02 AM

and here's vantage to : http://hwbot.org/submission/2221577_

ReverendMaynard

11-15-2011, 10:05 AM

sick runs HC!

HybridChiller

11-15-2011, 10:05 AM

and just on air with vga lol.
9.12 seems to be the best driver for this model of card.

HybridChiller

11-15-2011, 10:12 AM

5 points more to get 2th of belgium lol.

Need a 8800GTS 320 or a 9800GX2

Splave

11-18-2011, 04:16 AM

testing 3 new 2700ks today :) 6.0ghz plllllz

Neuromancer

11-18-2011, 04:33 AM

You are a freaking machine man!

Splave

11-18-2011, 05:32 PM

all three do x56 on air ROFL wtf? I'll ty some ln2 tomorrow :)

DOM

11-18-2011, 05:42 PM

What setting did u use? I was trying to get mine to boot at x56 today I'm a nub on this asus BIOS :P

Splave

11-18-2011, 05:57 PM

56x100
1.525vCore
1.125vCCIO
.85vCCSA
1.75vDimm

1866strap/8-8-8-24

I used a venemous X resting on top of chips, and all my fans are at work so had to be quick. Bios was showing 48c pfff oops

DOM

11-18-2011, 07:04 PM

Thanks ;)

Does the vdimm need to be that high I'm at 7-10-7-24 1866 1.55v for everyday use

Witchdoctor

11-18-2011, 07:33 PM

Sweet AL :thumbsup:

Splave

11-18-2011, 07:48 PM

Thanks ;)

Does the vdimm need to be that high I'm at 7-10-7-24 1866 1.55v for everyday use

Nah your good, mine are hyper yours are psc?

DOM

11-18-2011, 08:25 PM

Ripjaws 1600 6-8-6-24 1.5v

Splave

11-19-2011, 04:53 AM

First chip does 5760, 2nd 5600 flat and testing 3rd after I help this patient :)

HybridChiller

11-20-2011, 08:34 AM

did some Opteron runs this weekend, no interest of overclocking it at all, just some points and cups lol.

Profile point almost 750 now, where i did come from 2 months ago from 200 points lol.

Witchdoctor

11-20-2011, 08:55 AM

Pounding the Bot consistantly ........... :thumbsup:

teh chiller is rip in it up

HybridChiller

11-20-2011, 09:54 AM

I think Kal-El likes it lol, already for a fat two months making hw boints.

Go from +600place to 73th place lol, 2th of belgium.

Me like it, whant to do a Sempron 145 also for Wprime single core ranking under LN²

Splave

11-21-2011, 05:52 PM

Leaving for FL to thanks give with my Wives grandparents wednesday, could be her gradpas last. Pretty sad, AirForce Pilot with some crazy old stories.

Anyways 3930k's x2 tomorrow and the SS should be arriving then as well. Pretty exciting stuff. See how she handles SB-E

Neuromancer

11-21-2011, 06:27 PM

2 more chips arriving? Dang...

DOM

11-21-2011, 07:07 PM

2 more chips arriving? Dang...
:eek: lol ..... He need to give me a job at his work :)

Patch

11-21-2011, 07:43 PM

Nice work as always Hybrid.

Have fun at the in-laws Splavemaster.

My 3960's arrived today, but I have the first set of house guests arriving tomorrow. We'll see how it goes - either I won't get any benching done til Saturday, or I'll have some pouring help :)

Started lapping Lightning 580's. Holy concavity batman!

thebanik

11-21-2011, 08:30 PM

November end, my wife is going to her parents for 15 days, :yahoo: , finally would have some time for benching I hope, :D....Will start prepping GTX580 and other boint cards.......

MaadDaawg

11-22-2011, 04:35 AM

I'm lucky, we're going to my wife's sister house for Thanksgiving... except for 2 hours of driving and 3 hours of eating, benching time will be open for business.

I'm thinking I deserve the MOM this month ISO the Chiller :D

Splave

11-22-2011, 04:45 AM

Splave

11-22-2011, 10:19 AM

http://valid.canardpc.com/show_oc.php?id=2111293

first chip lol 1.5v 5400 but pretty much maxed, maybe has 5425 in it

Patch

11-22-2011, 10:46 AM

what temps?

Splave

11-22-2011, 11:21 AM

-48c idle :)

Splave

11-28-2011, 06:26 PM

over thanksgiving vacation accumulated some nice tridents :) 2133 kits

http://i.imgur.com/lLYVU.jpg

Will bin over the next few days. I believe half are psc half are BBSE

hehe first kit rated 9-9-9 2000 3x2gb BBSE (6 of the sticks are this)
http://i.imgur.com/4LOW8.jpg (http://imgur.com/4LOW8)
7-9-7 2200 hehe 1.75v Im in love

Neuromancer

11-28-2011, 11:22 PM

Whats that translate to at 5.5 GHz?

Im guessing 6' at least? Thought the 2nd number and the 4th number on mem timings is most important for Intel spi benching. Would love to do a comparison but so busy with notwork and kids...

Witchdoctor

11-29-2011, 02:14 PM

Dam those bastards tighten up nicley.

MaadDaawg

11-29-2011, 03:47 PM

Dam those bastards tighten up nicley.

Had a girlfriend like that once :D

Patch

11-30-2011, 06:13 PM

I was hoping to get some more benching in before the end of the month, but the prep time for my current project is turning out to be freaking ridiculous.

I wasn't going to lap anymore 580s until I saw the thick central lake of TIM when I took the stock cooler off this card (that could only do 950 on air). No way I was gonna waste my time putting a pot on this heatsink:

http://overclockaholics.com/forums/attachment.php?attachmentid=5916&stc=1&d=1322712563

My arm is getting tired:

http://overclockaholics.com/forums/attachment.php?attachmentid=5917&stc=1&d=1322712563