Aug Wazza + 2K3 'n' stiff.

[kikicoco1334]

Aug already started and looks like we being having alotta fun with 2D bench / SPI thanks to the our contest host and support from ThermalTake Rep. and all the hardworking people that's keeping everything rolling and trolling and h8in

Just got a new F1EE, F1 Gemini (only the rocket base) and a little 666 GPU pot super excited and i am ready to rock, let's go!

about to insulate the Vaseline filled Commando motherboard....
kinda excited about that..
not so sure how the hell am i gonna insulate it with non vas stuff...
we'll see (i'll post pix..)

[kikicoco1334]

http://i18.photobucket.com/albums/b102/ghostloveff/110807%20Insulating%20Vas%20Commando/IMG_4374.jpg

http://i18.photobucket.com/albums/b102/ghostloveff/110807%20Insulating%20Vas%20Commando/IMG_4375.jpg

now just showing off now
http://i18.photobucket.com/albums/b102/ghostloveff/110807%20Insulating%20Vas%20Commando/IMG_4376.jpg

let me know what you guys think

cuz on the top there is no eraser but around the CPU socket just a little showed in the first pix

[DrNip]

Nice RAM. Dunno too much about that insulation and how well it will do. What is it, just your plain o foam packing that you would find in packing? If it is I know that stuff can hold some water like a sponge which might be bad.

[Bones]

I agree, you might want to test that stuff first before commiting to a run.

You could use the method I've used before by using a thin film of dielectric grease where you know or think water/condensation will be.
You don't need to glob it on, just get a film of it wherever needed and it should prevent a short. If you still want to use the foam, the grease would at least give it some protection - Only real drawback to the grease is well, it's grease and not the easiest stuff to clean off.

[DrNip]

That stuff would prolly make a better coffee filter, lol.

[Bones]

That stuff would prolly make a better coffee filter, lol.

I'll take two lumps (of foam) in mine please. :blink:

[OC Maximus]

let me know what you guys think


WTF? :Dizzy:

Eraser that shiz.

[kikicoco1334]

here is the final picture
http://i18.photobucket.com/albums/b102/ghostloveff/IMG_4382.jpg

http://i18.photobucket.com/albums/b102/ghostloveff/IMG_4383.jpg

and there is gonna be stuff around the pot as well
and the LOTS AND LOTS OF PAPER TOWS
LOTS! LIKE 30FT lots


WTF? :Dizzy:

Eraser that shiz.
i tried but the prob is when i put the damn eraser on it slips off cuz the lovely VAS!

That stuff would prolly make a better coffee filter, lol.

GONNA GIVE THAT A TRY TOMORROW MORRNING

[Witchdoctor]

I would use steam or something to clean that shit off with and make erasrer stick .......

That shit is like a sponge, and while it won't tranfer cold it will cetainly tranfer water .... :ohcrap:

[rickss69]

Kiki, if you don't get eraser around the perimeter of that cpu you are going to lose it. I'm talking about where the chip sits in the socket and the bracket meets the chip.

[MaadDaawg]

eraser young man, eraser :D

[kikicoco1334]

just went out got a huge as pack of q tip LETS CLEAN!

if still don't work im just gonna trow it in the dishwasher and call it the day



UPDATE: GOT THE DAMN ERASER IN THE SOCKET AND AROUND THE SOCKET!

[kikicoco1334]

the rocket pot is amazing! OMG! it drops temp like crazy but the only prob is it's got NO mass! well... vs. the F1EE i can have that sucker a 1/4 pot and it stays cool real good

i am loving it!

monna get my new Celeron 352 a try tomorrow what do you guys think? F1EE or the baby pot?

[Kal-EL]

Prolly use less Ln2 using the rocket to get u there quicker.

[kikicoco1334]

yeah i am using the rocket right now and it drops temps down below -50 with only a little LN2 but the bad part is the China chip i have right now the 352 it's CB is -50 (+/- 5C) it seems like a very good clocker as up to now i got to 250mhz x24 from 200mhz x24 with out having any issues until my multimeter popped out of place and hit the motherboard and it shut the whole thing off had to wait from being -100C to -50 ">.<"

[DrNip]

I prefer the slow base. Really prefer the original F1EE but don't have it anymore. :(

Can't stand how the new F1EE base separates. Dunno how many times I have picked it up and the bottom to fall off, lol.

[HybridChiller]

tape it together ? :blush:

[DrNip]

Oh yeah I have painters tape and Armaflex around it. Before I did that I dropped it as well as when I switched over to the slow base.

[kikicoco1334]

dude i dropped the rocket base on my foot when i first got it THAT SUCKED ASS!

but yeah i pretty much just taped it together and called it the day...

just a real quick question...
for the Commando or over all 775 boards how good is the temp reader in the BIOS? cuz normally it's like a 5C diff from the temp i am reading with the thing

cuz i know 1366 up to like -30 is really good but after -40 is just like "umm.... FFFFFUUUUUUUUU"

so far .....
the China 352 CB is at -50 dead on...
and have one of the 352 @ 2.035v @ 7.20Ghz it may beable to go higher but most likely cuz of my lack of temp and LN2 control keeps on crashing at -85C ~ -115C @ 7.2Ghz gonna give it another try monday when my mom is not home :P

that been said the new F1EE Rocket base drops temp REALLY quick! all i gotta do is 1 full pot the temp will be at the right temp and after that just lots of little adds and the control is kinda hateful

the old F1EE take a few min longer to drop the temp to the happy time but once it's there the temp holds it self there is not much temp control needed well... not as much

oh btw overclocking is banned from my house now :rofl

[HybridChiller]

i got today a Commando in with the mail, just popped a E6600 in it test it.

This commando does +640fsb, so i hope i have good cpu's lying around here.

[kikicoco1334]

dude excited for you mang!