PDA

View Full Version : New 2500K Build

Cecil
03-23-2011, 05:08 PM
I got $200 for the i7 860 I had, and still have a Maximus III formula to sell. I was able to pick up a 2500K for $80 (friend owed me $100), and I got a MSI P67A-GD55 for $120 after $20 MIR. Microcenter was nice enough to let me use an expired $25 coupon of an Intel mobo :blink:

So in the end I got a good upgrade, and cash in my pocket :thumbsup:

http://i864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/th_2011-03-23214934.jpg (http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/?action=view&current=2011-03-23214934.jpg)

http://i864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/th_2011-03-23215108.jpg (http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/?action=view&current=2011-03-23215108.jpg)

http://i864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/th_2011-03-23215145.jpg (http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/?action=view&current=2011-03-23215145.jpg)

http://i864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/th_2011-03-23215204.jpg (http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/?action=view&current=2011-03-23215204.jpg)

http://i864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/th_2011-03-23215858.jpg (http://s864.photobucket.com/albums/ab207/ctmaudi/PC%20Setups/Sandy%20Bridge%20Build/?action=view&current=2011-03-23215858.jpg)


Previous build was a red theme, so just going to have to wait and see how the blue board mixes in. Going to pick up a C400 SSD or similar here soon, and likely a 6950, or a pair of weaker cards. Have an H50 and a Tuniq Tower Extreme to pick from for cooling right now, untill I can get a decent loop going. Its going to be my daily/gamer setup.
Neuromancer
03-23-2011, 06:27 PM
I would use the tuniq. IF you intend to push the cpu to its limits :)
Cecil
03-23-2011, 06:52 PM
Was almost done hooking it up with the Tuniq, but my ram wouldnt fit under it :(
Now I got to tear apart the HTPC for the H50.
Neuromancer
03-23-2011, 09:58 PM
Did you try spinning the cooler 90 degrees?
Cecil
03-23-2011, 11:21 PM
Did you try spinning the cooler 90 degrees?

No, but I still dont think it would have worked. The H50 is holding 4Ghz 1.25v under 70C so far. Its only temporary till I get a real loop. Trying to decide if I want the loop, SSD, or vid card upgrade first.
Witchdoctor
03-24-2011, 12:13 AM
Sweet.... SB = WIN

What fans are you using on the H50 ? ....

maybe some 110 CFM slipstreams could help
Cecil
03-24-2011, 09:28 AM
I only have one CM sickelflow on it right now. Have more coming in the mail.
kikicoco1334
03-24-2011, 01:39 PM
dude that's a realy nice setup bro!
but why 25k man! it's only $60 more for the 26k.. just sayin
Cecil
03-24-2011, 01:51 PM
dude that's a realy nice setup bro!
but why 25k man! it's only $60 more for the 26k.. just sayin

A friend owed me money and was selling his, so I got it for $80.

Almost at 4.4 stable so far with 1.275v. The voltage control on this board is pretty nice. If you put 1.25, you get 1.22 idle, and 1.248 load with the "low vdroop" option. With the high option, it overvolts .02 at idle, and undervolts .02 at load.
Neuromancer
03-25-2011, 04:44 AM
No, but I still dont think it would have worked. The H50 is holding 4Ghz 1.25v under 70C so far. Its only temporary till I get a real loop. Trying to decide if I want the loop, SSD, or vid card upgrade first.

OMFG.

Prolimatech Air cooler holding 5GHz at 65C load so far :( H50=fail


kiki... its 50% more for the 2600K for nothing more than HTT... 2500K is good deal
GeorgeStorm
03-25-2011, 06:53 AM
Partially depends what fans you're using with it, those temps do seem high though, the mount is good? :/
Cecil
03-25-2011, 09:48 AM
I was only using it with one fan at the time, pulling from it out the back of the case. Got the rest of the fans I needed yesterday, and put a push one on it. Down to 63C after Linx 20 passes and 12 hours of prime, 1.3v 4.3Ghz.
Witchdoctor
03-25-2011, 09:51 AM
Auto overclocking prolly get you 4.6 ...

My board has a 4.6 button :thumbsup:
Cecil
03-26-2011, 02:45 PM
Got 4.4 stable I think, took 1.325v. Topping out at 74C with the fans down to "quiet". Should be able to get 4.5 stable with the H50.
Cecil
03-31-2011, 11:17 PM
4.5 is stable with 1.35v, no other changes. 78C max after 14 hours of prime.

Couldnt get it to boot at 2133, but havent tried too hard yet. Been using 1866 8-8-8-24.

Got a GTX-560 Ti and a Samsung 470 128Gb SSD coming.
Neuromancer
04-01-2011, 04:06 AM
You will need to raise Vccio to get it to run 2133. I think only about 1.15 IIRC. More helps.. I push 1.25 when i'm clocking the RAM up with tight timings at 5GHz..
Spank
04-06-2011, 02:39 AM
im starting getting jealous with those 2500k,i mean wtf 4.5 stable with 1.35v and my 975 at 4.2 needs 1.375, ofc i want say that at 4.4ghz needs 1.4 :wtfsign:
Witchdoctor
04-06-2011, 03:07 AM
4.5 is stable with 1.35v, no other changes. 78C max after 14 hours of prime.

Couldnt get it to boot at 2133, but havent tried too hard yet. Been using 1866 8-8-8-24.

Got a GTX-560 Ti and a Samsung 470 128Gb SSD coming.


Pounding that thing with prime ........ :Dizzy:

you going for 24/7 settings ?

Bench that sucker, SB = Easy bake oven for kids


8xP-6xhauf4
Cecil
04-12-2011, 09:05 AM
Pounding that thing with prime ........ :Dizzy:

you going for 24/7 settings ?

Bench that sucker, SB = Easy bake oven for kids


8xP-6xhauf4

Yeah, was going for daily stable. Dont have enough time to get back to benching yet, my hours just increased again. Once I get better cooling, I might try to run a few quick ones just to see what it can do.