Five App February

[Kal-EL]

Hexus PI FAST
Super PI 1M
Super PI 32M
Wprime 32M
Wprime 1024M

This is our focus for February. Lets have the guys with Sandy Bridge tear shit up in the PI's :thumbsup:

[OC Maximus]

Yeah, I gots some work to do.....

[DrNip]

Gotcha. Brought my setup back in the house where it is warm to figure this RAM out. It's holding me back I believe.

[OC Maximus]

I need to get some new rams, my hypers aint jiving with SB.

[DrNip]

Mobo is holding me back from better RAM. Can't get another mobo as they are pulled from the shelves so I am stuck with what I gots. Would have loved to gotten the 2133MHz version of the RAM I have now.

Glad to be back in the 400 point club again.

[Hondacity]

sandy bridge rape must be postponed...lol

i haz no cpu or board :D

[Hondacity]

for sp1m

i should be 1st..reasons:
1. i used less gigahurtz
2. i got more points lol

[Kal-EL]

for sp1m

i should be 1st..reasons:
1. i used less gigahurtz
2. i got more points lol
lol

[OC Maximus]

d comes before h :P

[Witchdoctor]

:ohcrap: I suck .................................. :shock:

[HITandRUN]

Yeah I got to get back on the benching horse! :ohcrap: When Splavestick is back from vacay I'll invade his home once gain for some SB and 980X action! Maybe the 580GTX DirectCu is in retail by then!

[DrNip]

One thing annoying about this mobo is I will set a timing or subtiming, reboot and it will be stuck at the previous value. It will show the vlaue I set it to but won't run it. I have to "Load Optimized Settings" in BIOS, reboot and then set it to what I want.

[Kal-EL]

One thing annoying about this mobo is I will set a timing or subtiming, reboot and it will be stuck at the previous value. It will show the vlaue I set it to but won't run it. I have to "Load Optimized Settings" in BIOS, reboot and then set it to what I want.

Oh man, that sucks rocks dude, wtf is up wit that shiznit?

[DrNip]

Dunno. It seems to only take the values on a hard reboot. Instead of loading optimized settings I found that I can change the cas one higher along with the value/s I am changing, get the hard reboot and then change the cas back to whatever I had it at. So far that has worked twice now. Sucks. I swear it is worse than it was before though. Hopefully fixed in a BIOS update. Hopfeully not mobo biting the big one either.

[Neuromancer]

need to get me a GB board I think to push like the rest of the team. I will keep my eye out for something.

[OC Maximus]

New ram on the way for UD5 + 2600k

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231451

Super Talent Speed 2000mhz CL7 Hypers will take a back seat for now

Now I just need to finish binning 2600k's :Dizzy:

[Patch]

Have a blast gentlemen.

I'm busy this month trying to buy a bigger house. Looks like it's gonna be a nasty bidding war for a short sale. And that's assuming we get lucky enough to have the present contingent sale fall through......

[DrNip]

New ram on the way for UD5 + 2600k

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231451

Super Talent Speed 2000mhz CL7 Hypers will take a back seat for now

Now I just need to finish binning 2600k's :Dizzy:

That is the RAM I wanted but 2133 isn't compatible with my mobo. :(

[Splave]

I hope the 13** asus bios fixes a bunch of stuff (releases any time now) until my gd80 arrives :D

[Kal-EL]

Have a blast gentlemen.

I'm busy this month trying to buy a bigger house. Looks like it's gonna be a nasty bidding war for a short sale. And that's assuming we get lucky enough to have the present contingent sale fall through......
Good luck buddy :)

[Splave]

Yeah I got to get back on the benching horse! :ohcrap: When Splavestick is back from vacay I'll invade his home once gain for some SB and 980X action! Maybe the 580GTX DirectCu is in retail by then!

your welcome anytime my good friend :D (any of you guys are) :thumbsup:

[sumonpathak]

i wish i had the moniez:(
darn you student life:mad:

[GeorgeStorm]

Why not sell one of your rigs then? :p
Student life is no excuse, if I can work out how to get my stuff there, I'm aiming to have a LN2 session sometime this month ;)

[Witchdoctor]

Dam george, your tough bro .............. :greensick:

[GeorgeStorm]

Haha, to be fair, I pretty much have no money atm due to spending it on benching stuff, and so am no sure what I'm going to be eating this month :P

[kikicoco1334]

so excited :)

[thebanik]

i wish i had the moniez:(
darn you student life:mad:

Atleast get yourself a decent air cooler. That much can be covered even with your pocket money.

[thebanik]

Haha, to be fair, I pretty much have no money atm due to spending it on benching stuff, and so am no sure what I'm going to be eating this month :P

You gotta be in this team mate........:thumbsup:

[Witchdoctor]

Alrighty ..... fab five has motivated me to run some 2D

I am only a half decent bencher at best, but I particulaly suck at 2D ....... :shock:

And now SB is on it's way to RMA land I am left with only a 775 platform.

The good news is I have cleaned out the basement in this old farm house I live in now and discovered a work bench, After digging through any throwing away all the articacts laying down there and some shop vac work I have discovered a little work area that I think will serve me well

So I will be insulating up an old x38 Maximus Formula and all though I won't be competing to get up on this list's in the OP, I will be working some 2D retro benching this month to keep in the spirit of things ...

First up will be a Q6600

Best of luck to all as we try to hold off Mod labs and gain some ground on Hellas .....

Rip it up one and all ................ :thumbsup:

[GeorgeStorm]

If I'd found you guys first I would be, but couldn't leave BTUK, anymore than any of you could leave OCA ;)

[Splave]

Alrighty ..... fab five has motivated me to run some 2D

I am only a half decent bencher at best, but I particulaly suck at 2D ....... :shock:

And now SB is on it's way to RMA land I am left with only a 775 platform.

The good news is I have cleaned out the basement in this old farm house I live in now and discovered a work bench, After digging through any throwing away all the articacts laying down there and some shop vac work I have discovered a little work area that I think will serve me well

So I will be insulating up an old x38 Maximus Formula and all though I won't be competing to get up on this list's in the OP, I will be working some 2D retro benching this month to keep in the spirit of things ...

First up will be a Q6600

Best of luck to all as we try to hold off Mod labs and gain some ground on Hellas .....

Rip it up one and all ................ :thumbsup:
nice work area bro

[Witchdoctor]

Thanks man, '

Got the board insulated what a PITA, this board is a chore ,,,,,,,,,

[Hondacity]

wd

you got subzero...

you practically should be in our top...

winxp and win7 are easy to tweak...

maxing out cpu and ram are also doable...just need the right tools....

me and dom and ocm and ny_driver..chat and they always help me out....you can ask these guys anytime..they practically bench 24/7 and ....i tell you what..ocm and dom and nydriver have all their tweaks ....tweaked...

[Witchdoctor]

Just a single stage, and Dice........... :Dizzy:

Not set up up for cold juice, maybee one of these days

Disposable cooling is not in the budget right now, Will just use SS unless of corse I stumble on to a golden chip.

Then I will grab some dice, the econemy has really hit my benching hard, but I do what I can

But any help is always appreciated bro, will hit you guys up for sure, my 2D shit sucks, ............ :thumbsup:

I really like doing 3D, but need 5 GHZ.... this Q6600 won't do that .... would be thrilled with 4.4 to 4.5 on the single stager

[kikicoco1334]

that is a great looking setup man!

wish i never sold my Q6600!

[DrNip]

I know it is Five App February but went ahead and ordered a 5770 Hawk today for some 3D hardware boints. 580 is still in the works to be ordered Monday. :D

[Hondacity]

asus 580 direct cu..is almost out...or is that what you'll be buying...?

[DrNip]

Nah. Prolly won't fit in my case. Got to keep it 10.5" or shorter to fit. I know laugh all you want. I'm a case man now a days. Having a baby puts a damper on your benching style. I don't have it like i use too.

[Hondacity]

i think its short...but 3 slots lol

[DrNip]

3 slots would fit my case just fine. Prolly wait a couple of weeks or at least to see the specs on it. The card did perk my attention. Until then the Hawk can hold me off.

[sumonpathak]

Atleast get yourself a decent air cooler. That much can be covered even with your pocket money.
gettin it this month:D

[Witchdoctor]

OCM


OC Maximus (http://www.overclockaholics.com/community/user/oc_maximus): 61 submissions worth 569.5 points.


Damm bro Your an aminal .................. :laughing:

Great work bro .. :thumbsup:

[kikicoco1334]

i wonder how many those 580 cu cards can you run at the same time...

[Splave]

4 with pots or blocks and exhaust plates removed. maybe more on the marshall msi board with the lucid chip?

[kikicoco1334]

i'd love to see like a 3 or 4 way from someone lol

[Witchdoctor]

Patch has been crushing with his 580 4x set up.....


4 of those bad boys would put a serious hole in your pocket .......... :ohcrap:

[OC Maximus]

OCM


OC Maximus (http://www.overclockaholics.com/community/user/oc_maximus): 61 submissions worth 569.5 points.


Damm bro Your an aminal .................. :laughing:

Great work bro .. :thumbsup:
Thanks man! Having a blast benching for the best team on earth

In a few more days I'll be shifting gears back to 2d

Thank you all for the great motivation :good:

:dance::bs1::bg::cheers::bench::picmonster:

Oh, and one last thing............. OCA FTMFW!!!!!! :thumbsup:

[Witchdoctor]

Plenty of reasons to celebrate OCM ................ :)

I have been working on getting a 775 set up going, installing OS tonight

Hope tp have some time to get to some benching this weekend ... Retro style

[DrNip]

A little better run. :D

RAM sucks at these speeds. Great cas 6 @ 1600MHz for $75 but that is about it. I need an ATX so I can run with my cas 8 2133MHz RAM. ATX mobo will net me a sub 6 run I do believe indubitably.

4513

[Hondacity]

1.696v? temps?

you're killing an absolutely awesome chip... :(

[DrNip]

1.696v? temps?

you're killing an absolutely awesome chip... :(

That's what it takes my man to get me where I need to go. Temps are 20 or so idle and around 40 or so during the run. Chip is still good. I kill it, I get another. Would you rather me just game with it? I mean I can. Since having a kid I don't have the luxury to have a seperate benching station like I use to. If I did then I would have this puppy over there with a SS or DICE on it benching the snot out of it on an ATX with better RAM, but I don't. I work with what I got and this is what I got. Old man winter in my corner.

[Hondacity]

oh well...

[DrNip]

Luckily I had 3 1/2 days off this week due to winter storm and I benched with that free time. I usually don't have anytime at all to bench. I made the most of what time I did have because it won't be like this again.

[Splave]

give her what she needs :D
would be a shame to not bench such a cherry.

[OC Maximus]

Maybe safer under SS to keep vcore down.

Awesome chip dude.

[Witchdoctor]

Nip got mad skillz..........

Nice work travis, milk that dog and retire it to the Crysis 2 cause when done

Month and a half to go, 3/22 I beleive

[DrNip]

Hopefully when the mobos are re-released I can get an ATX and do some benching with my pot. Will be doing 3D benching the next few weeks ahead. I did manage to get 101 BCLK with 55 multi which tells me there is hope for my chip in overclocking the BCLK with high multi.

4514

[Witchdoctor]

sub 6 looks reachable .......... :thumbsup:

[OC Maximus]

SuperPi 32m - 6min 22sec 844ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 12.4 + 1.4 points
SuperPi - 6sec 953ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 4.4 + 0.1 points
wPrime 1024m - 2min 23sec 703ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 15.3 + 3.7 points
wPrime 32m - 4sec 547ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 13.5 + 3 points
PiFast - 13.83 sec - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 11.8 + 0.1 points

Gskills should be here Monday. Then I'll give her another go.

[Neuromancer]

Very nice 32M :) That on the tai server?

[OC Maximus]

Very nice 32M :) That on the tai server?

Nope, it was on winFLP :thumbsup:

Haven't tried the taiserver yet. Saving that for when the better rams for spi32m get here ;)

[Neuromancer]

Nice! Glad it is working out for yah :)

[Splave]

2 more 2600ks will be here tomorrow.....

[rickss69]

L042B243 due here Wednesday...

[Splave]

ps benched my work lappie for 6 golds lol w00t lets get 7 back!

[DrNip]

On the titter totter on whether or not to buy a 2500k for my case and start piecing together a new benching set up with my 2600k being my 1st victim. All I need is a PSU, 2500k and a ATX P67. The mobo is what is holding me up because the new ones won't be out until April and by then the Z68 might be out by then. I found some places that are selling the Asus Pro ATX and what I have read there are no problems with it just like the Micro version which I have. Going to chew it over a little longer.

[OC Maximus]

New Gskill's @ rated speeds of 2133 7-10-7-27 T1 knocked 3 more seconds off my best spi32m time. Now we're talking :D

SuperPi 32m - 6min 19sec 375ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5326MHz) 13.5 + 3.2 points

28 Processes running and still in normal mode :P

Still have to OC the ram and streamline the OS so still some work ahead of me.

Thanks HC for helping sort out my initial ram issues ;)

[Witchdoctor]

Have a set of them on the way from RMA


"ps benched my work lappie for 6 golds lol w00t lets get 7 back!"

Mod Labs is coming up from behind :ohcrap:

They are not done yet, We need some seperation ............... :clapping:

[DrNip]

What water block you rocking there OCM?

[Splave]

Im HW boint trolling today, see what I can do :D

[OC Maximus]

What water block you rocking there OCM?

Koolance CPU-360

[Splave]

hey ocm you catch that no execute mem protect tip on xs?

[OC Maximus]

hey ocm you catch that no execute mem protect tip on xs?
Oh yeah, watching that thread closely. Thanks brotha :good:

[Neuromancer]

hey ocm you catch that no execute mem protect tip on xs?

Where is that at?

Is the tip to disable it? I thought we did that already...I recommended disabling it in my UEFI breakdown :)

"Execute Disable Bit (XD) prevents some buffer overflow attacks by creating non-writeable pages in system cache. Extreme overclockers will disable this, 24/7 Overclockers can leave it enabled." :thumbsup:

I need to spend more time at XS :(

EDIT: nm I found it. Hmm surprised more guys do not turn that off by default.

[DrNip]

I always disable it. I did see how HWBot put it on their front page like they were a bunch of genius's for disabling it, rofl.

[OC Maximus]

They must have put it on the front page for noobs like me :P

[Splave]

2x L045a912's just arrive hope they suck less balls then my others

[OC Maximus]

LMAO!

[Neuromancer]

LOL Your crappy chips are better than my best... methinks its more the Man than the machine ;)

[OC Maximus]

I'm sure you got a winner there bud. One x58 and a backup x57 :D

[Neuromancer]

I'm sure you got a winner there bud. One x58 and a backup x57 :D

That would be sweet. GL Splave :)

[Splave]

lol idk about all that you guys are funny lol

neuro you can bench over 5.2ghz which none of mine can ;)

1st chip is booting 52x100 easy enough...but x53 seems to be trouble. posts and goes to a black screen and hangs...faaak

[rickss69]

My original chip would bench no higher on the Biostar mb (5.3GHz). My new 2600K should be here tm...it is from a batch that I have seen x58 on Biostar mb's.

[kikicoco1334]

My original chip would bench no higher on the Biostar mb (5.3GHz). My new 2600K should be here tm...it is from a batch that I have seen x58 on Biostar mb's.

i am kinda confused here...
2600k is a SB and x58 is x58
same batch number? how dose that work? :Dizzy:

[rickss69]

100. x 58 as in 5.8GHz kiki...

[kikicoco1334]

100. x 58 as in 5.8GHz kiki...
oh! :laughing:
my bad
i didn't click there

[Splave]

here is 3rd boot, easiest so far :thumbsup: dont mind the time :taunt:
found out what cuts the power off when I start pi, this wasnt 1m stable until I switched it :shock:

[Splave]

x53 needed 99.5 to boot :( not a good sign

[DrNip]

2x L045a912's just arrive hope they suck less balls then my others

Wish you could have gotten two from separate batches. I think you would had a better chance at finding a gem like that.

[Splave]

Yeah but mwave was the only place I could find in stock :X

[Hondacity]

i was gonna get some from mwave.....thanks for testing ...sad results...

[Neuromancer]

here is 3rd boot, easiest so far :thumbsup: dont mind the time :taunt:
found out what cuts the power off when I start pi, this wasnt 1m stable until I switched it :shock:

Not bad Splave, Might I suggest running Waza though? :ohcrap:

And whats cuts the power off when you start Spi??? I had an issue running spi on a system that was wPrime stable... I just added more juice though...

[Splave]

yeah im just running to see if its stable, no maxmem, no priority, wazza, services etc

5300 is max 32m. settings 5320 with turboV causes bsod. must boot 99.5x53 then up to 100 in windows

will try the other chip in a bit.

[Neuromancer]

Very nice. I just tried the new BIOS real quick and I can't boot 5.2 :(

Tried 52x and 51x @102.

Will try again tomorrow in the cold working up from 5 GHz.

[OC Maximus]

yeah im just running to see if its stable, no maxmem, no priority, wazza, services etc

5300 is max 32m. settings 5320 with turboV causes bsod. must boot 99.5x53 then up to 100 in windows

will try the other chip in a bit.

5320 is the benchable max on my rev c chip with 100.7x53 in bios. it doesn't like 99.Xx54 at all.

Hope your #2 does better Mang!

[OC Maximus]

Tweaked rams and still need to figure out how to lower tRCD. I'm open to suggestions :Dizzy:

[Splave]

hey neuro I just flashed and had a hell of a time getting the c6 and speedstep garbage to stick on boot lol. Finally worked itself out.

Here is chip #2, mem is still slow etc going to try higher now. Low volts is nice I guess :keeporder:

@ocm it wont do 9 huh?

[OC Maximus]

@ocm it wont do 9 huh?
It reboots at 9 even at 3.5ghz.

[Splave]

what type of volts you using to the ram?

w0000000t x54 :) needed slight bump to VCCIO from stock to get past xp loading

[Hondacity]

increased vccio, vcore
decreased temps...

[Splave]

55x100 passed 1m and pf :D bumping up again to 56 right now

[Patch]

Nice to hit the 5.4 level Allen.

RMA'd my SB mobo for refund and sold my 2600K. Wondering if I should have held on to it......5.2 ghz wall, but 108 baseclock......should have tried it on a different board first.

Anyway. Nice to live vicariously through you guys as I won't really be benching for the next few months. :hug:

Edit: 5.5 level :thumbsup:

[DrNip]

Amazon has them in stock.

http://www.amazon.com/Intel-i7-2600K-Processor-Socket-LGA1155/dp/B004EBUXSA/ref=sr_1_1?ie=UTF8&qid=1297227060&sr=8-1

[ocgmj]

Microcenter near house has 20+ in stock.
Subtotal $279.99
Tax $24.50
Grand Total $304.49

[Splave]

well I think anywhere is a crap shoot, these last 2 are the same batch and 1 is a 5287 max and this one is way better. It starts to boot up 56x100 but keeps scrolling xp bootup, needs some more volts somewhere. Sucks turboV evo wont work on my xp install only my 2003 server install and the program is in chinese ftl.

Damn where does the time go in a day, gotta get some shut eye. More speed, bump mem multi and switch over to my server install tomorrow.

[ocgmj]

Sick work homie ;)

[DrNip]

well I think anywhere is a crap shoot, these last 2 are the same batch and 1 is a 5287 max and this one is way better. It starts to boot up 56x100 but keeps scrolling xp bootup, needs some more volts somewhere. Sucks turboV evo wont work on my xp install only my 2003 server install and the program is in chinese ftl.

Damn where does the time go in a day, gotta get some shut eye. More speed, bump mem multi and switch over to my server install tomorrow.

Mine does that on 57 multi. Just keeps cycling the Windows bootscreen. Sure if I could get it colder more volts would solve the problem. My chip needs more volts to get where it needs to go compared to some others. Then again mine goes higher than most of those others. Mine also seems to be a hotter chip. Wish mine did 5.5ghz at those volts. What type of cooling you using?

[Hondacity]

Nice to hit the 5.4 level Allen.

RMA'd my SB mobo for refund and sold my 2600K. Wondering if I should have held on to it......5.2 ghz wall, but 108 baseclock......should have tried it on a different board first.

Anyway. Nice to live vicariously through you guys as I won't really be benching for the next few months. :hug:

Edit: 5.5 level :thumbsup:

its not the board..

[Hondacity]

Mine does that on 57 multi. Just keeps cycling the Windows bootscreen. Sure if I could get it colder more volts would solve the problem. My chip needs more volts to get where it needs to go compared to some others. Then again mine goes higher than most of those others. Mine also seems to be a hotter chip. Wish mine did 5.5ghz at those volts. What type of cooling you using?

mine boots @ 57x and 58x...but won't boot into windows...this is a known issue...some cpus can't handle the load....when turbo kicks in when booting into windows..

[DrNip]

2 1/2 hours work for only 41 points tonight. Got this Hawk figured out though out of it all. Hell of an overclocking card. Wish I could say that about all GPU's. Need to do a XP install tomorrow and run all benches besides Vantage. For some reason Aqua won't run on my Windows 7 install. Will have to run it on XP as well. GTX 560 and 4870 coming in tomorrow too. Gots to find time to get this all in before it gets warm again. :rollineyes:
Hopefully I can break the 1,000 team points threshold afterwards. Gettin close.

[DrNip]

mine boots @ 57x and 58x...but won't boot into windows...this is a known issue...some cpus can't handle the load....when turbo kicks in when booting into windows..
Wonder if I wait to kick in turbo while in Windows instead of while loading Windows.

[Hondacity]

already tried that...

turbo kicks in..when you load windows...the delay doesn't help at all

[Hondacity]

congrats al ...you'll do justice :D..wish it were 57x though..

[OC Maximus]

2 1/2 hours work for only 41 points tonight. Got this Hawk figured out though out of it all. Hell of an overclocking card. Wish I could say that about all GPU's. Need to do a XP install tomorrow and run all benches besides Vantage. For some reason Aqua won't run on my Windows 7 install. Will have to run it on XP as well. GTX 560 and 4870 coming in tomorrow too. Gots to find time to get this all in before it gets warm again. :rollineyes:
Hopefully I can break the 1,000 team points threshold afterwards. Gettin close.

Had my 5770 Hawk screaming at 1175/1425 on water. Hella good cards ;)

Now go catch my 3d01 Gold with your magic chip, lol :good:

[OC Maximus]

well I think anywhere is a crap shoot, these last 2 are the same batch and 1 is a 5287 max and this one is way better. It starts to boot up 56x100 but keeps scrolling xp bootup, needs some more volts somewhere.


Gosh darn do I need a golden chip. Congrats on a decent one! I'm so feening to get a sub 6sec spi32m.......

[Hondacity]

feening...lol

[Neuromancer]

Very Nice Guys! Grats on the 2nd Chip Allen :)

[OC Maximus]

what type of volts you using to the ram?

Needs 1.74 to not error out of spi32m.

[rickss69]

After trying my original chip in the Biostar and clocking the same 5.3GHz I'm fairly certain it is the cpu holding me back. The WS Revolution and the 2600K both get shipped back to NewEgg tm. Pretty certain they will just refund...hopefully the inbound 2600K will perform better than the last in the Biostar mb.

[Witchdoctor]

Seems sometimes you have a good CPU sometimes you don't

s55QoIZScP4&feature

[Splave]

thanks men, 5600 seems to be the ceiling on 25c air, taking it to the garage in a bit. its 5F out today. pretty crazy though the chip idles at 30c both cores hits 70c at 5.5 1.55v quite the delta

good luck on your chip rickster.

Its allllll chip guys, having gone through 4, this last one couldnt have been easier to clock. till I hit x54 which needed a bump in IO. IMO if you can pass 100x54 sky is the limit.

[Witchdoctor]

Grats brother Al .......... :thumbsup:

you do that on the Deluxe or the MSI ?

[Splave]

deluxe I will try on gd65 when it arrives

[thebanik]

thanks men, 5600 seems to be the ceiling on 25c air, taking it to the garage in a bit. its 5F out today. pretty crazy though the chip idles at 30c both cores hits 70c at 5.5 1.55v quite the delta

good luck on your chip rickster.

Its allllll chip guys, having gone through 4, this last one couldnt have been easier to clock. till I hit x54 which needed a bump in IO. IMO if you can pass 100x54 sky is the limit.

Damn nice, finally team's luck changing. Need to change my chip too but Intel has stopped distributors from selling these, so lets see when I can get hold of new chips

[DrNip]

You are where I was at Splave and doing what I did. Been spending alot of time in the garage lately. O lady is use to it by now as this isn't the 1st time I spent many of days in the garage during winter.

Anyone else having problems with Aquamark and SB? Wouldn't run at all on my Windows 7 and on two different XP installs it will run but gives me this error message at the end.

4559

Also I can't set cores to infinity in task manager. Not that it matters because it won't run but says I don't have permission.

Also can't get the details tab to show in 01 like others had problems with on their Asus mobos. Pisses me off as I have two GPU's worth alot of boints and missing out on a total of 4 benches between the two.

[Splave]

for 01
http://hwbot.org/forum/showpost.php?p=94160&postcount=263

for aq3 did you delete the .dll? maybe try run as admin idk thats weird. sure its stable?

[rickss69]

Seems the new chip will do no better than the first. Still stuck at 5.3GHz no matter which mb. Only way I will invest more is to buy a known chip from one of you guys.

[Witchdoctor]

You are where I was at Splave and doing what I did. Been spending alot of time in the garage lately. O lady is use to it by now as this isn't the 1st time I spent many of days in the garage during winter.

Anyone else having problems with Aquamark and SB? Wouldn't run at all on my Windows 7 and on two different XP installs it will run but gives me this error message at the end.

4559

Also I can't set cores to infinity in task manager. Not that it matters because it won't run but says I don't have permission.

Also can't get the details tab to show in 01 like others had problems with on their Asus mobos. Pisses me off as I have two GPU's worth alot of boints and missing out on a total of 4 benches between the two.


had the same thing with 01, if Al's tip doesn't work I just pulled up the text file, been waiting for it to get trolled as I have some back ups ready ......... :laughing:

Score blows but I can not get LOD or anything else for that matter to work in RIVA ???

[GeorgeStorm]

Wow thats a quick 580 ;)
I'd probs get a newer version of gpu-z if I were you

[Kal-EL]

Wow thats a quick 580 ;)
I'd probs get a newer version of gpu-z if I were you
No shit, or contact NASA with your alien origin gpu core ;)

[Witchdoctor]

datails , details ....

I am sure it will get trolled now :laughing:

[DrNip]

for 01
http://hwbot.org/forum/showpost.php?p=94160&postcount=263

for aq3 did you delete the .dll? maybe try run as admin idk thats weird. sure its stable?

Good looking on the 01.

Aqua runs are at stock settings on cpu/gpu. Took out the direcpll.dll and works perfect now. Thanks. Still can't change priority or set to infinity in task manager.

@ Doc - Whoa that has got to be a world record for core! ROFL Wish I could have gotten the 580 myself but went with a 4870, 5770, and a 560 for the same price.

[Witchdoctor]

LOL ,

will have latest when I get my shit back ......

Nice Nip be crushing some hardware action ..... I have been playing with a Q6600 for a few days, But thinking the board I am using could be better

x38 Rampage Formula

[DrNip]

I have a problem and it has been so long since I have done any 3d benches that I forget the work around. I can't access task manager when I run aquamark on my ati card. As soon as I start aqua I cntrl, alt and delete. I then click task manager and then aqua pops back up preventing me any access to the task manager to set my cores to infinity. It doesn't do that with my nvidia card.

[Splave]

can you control+esc or alt+tab out of aq3 then?

[DrNip]

can you control+esc or alt+tab out of aq3 then?

Wammo, problem fixed. Thanks.

On a side note, anyone know anything about these and how well they can clock?

http://www.corsair.com/cmt4gx3m2a2000c8.html/

http://www.corsair.com/cmt4gx3m2a2133c9.html/

Both show to be compatible with my mobo.

[Splave]

you are better off with one of those 2400 sandy kits on newegg imo. These look like low bin psc or bbse

[DrNip]

you are better off with one of those 2400 sandy kits on newegg imo. These look like low bin psc or bbse

That would be great if I had a atx that could handle RAM like that but I'm on this micro that has shitty RAM support. I just need to bench with what I gots and wait for the 1155 to be re-released and pick up an atx to bench with.

[DrNip]

Only 44 points away from my 1,000 point team contribution. Should hit it this weekend. A new milestone for me. I might have been inactive for a bit but I ain't dead MF! ROFL :D

[Witchdoctor]

Nice work bro.......... go get it man ....

that chip you have is a 3D whore for sure ........... :thumbsup:

trying to milk this Q6600 this weekend for a few more boints than throwing in the e6600 for some more harware action

[DrNip]

Looking at picking up a phase change. Nothing over the top cooling. Just something that will give me cooler temps throughout summer time. Dunno, still tossing the idea around. Might just invest in a triple rad and block and see where it gets me 1st. Then use my pot with dice but try to maintain temps around 0 to -30 at the most. That might actually be a wise idea. Take this chip to subzero 1st to see how she performs before I go drop $400-500 on a phase setup. Might not perform for shat that cold and be out all that money for nothing. :(

[Hondacity]

1000pts... noice

[Witchdoctor]

Looking at picking up a phase change. Nothing over the top cooling. Just something that will give me cooler temps throughout summer time. Dunno, still tossing the idea around. Might just invest in a triple rad and block and see where it gets me 1st. Then use my pot with dice but try to maintain temps around 0 to -30 at the most. That might actually be a wise idea. Take this chip to subzero 1st to see how she performs before I go drop $400-500 on a phase setup. Might not perform for shat that cold and be out all that money for nothing. :(


Single stager is nice. fast cold with out the disposable cooling sorce.

It is also nice to dial in setting in preperation for real cold.

Not sure how much cold will get you with P67 as mine is for a gamer..... so I never put it under cold ... But 2011 will be the monster where cold will be required I would imagine.

I am trying to go cold on a shoe string budget ATM. want to give this LN2 a look see. everybody is getting such great results. MAde an offer on Jors 30L , but being it is already low he prolly won't be able to seel it for what I offered .... :shock:

Make no mistake, Drewmister is the guy for SS unit IMO

Dent and Duke are sporting his products, and from what I have seen their preformance edges out the rest of the field as far as builders go.

Jor's cascade is tempting but I do not have the cash for it ....

[DOM]

Drewmister made mine also :)

i got it getto modded to work on cards :laughing:

[DrNip]

Runmc has a nice one for sell I was thinking of getting. He only lives in north Texas where I live in OKC and I can just drive to get it in no time. Made up my mine to buy the 1156 Asus Genie and slap it in this rig of mine with my 750. Then get me an ATX mobo when they drop again. Like I said though, I'm going to check this chip out 1st on DICE to see if that doesn't get the job done. One thing I do know is this chip was meant to bench, not just sit in a case and collect dust. :D

5770 HAWK hard modded. Going to see if I can't squuuuueze out a little more core on it than 1104. Afterburner just wasn't cutting it. :D Will know tonight.

[Witchdoctor]

Good luck man, in for the results

1K in da bag ............... :thumbsup:

[DrNip]

Oh yeah. Still have this 4870 hardware boint monster sitting here as well as a 560 ti MSI OC Twin Freezer II. :D

Feels good to get some 3D benching in seeing I haven't done it in almost a year let alone have a GPU worth mentioning.

[Witchdoctor]

1200 boints FTW ......... :clapping:

[DrNip]

When running aqua in XP I can't set cores to infinity in task manager. I can Windows 7 though. XP is telling me I don't have permission. I am running as the administrator. I have tried everything but no luck. I believe I asked this question already but got no solutions besides am running as administrator. Anyone?

[ocgmj]

Give this a try nip.
4580

[OC Maximus]

4870x2 on the way

w00t!

Should have probably invested in a third 2600k but I just couldn't resist :D

[DrNip]

Give this a try nip.
4580

I've tried everything imaginable except the top three things you listed. Dunno if they will do the trick but will try. I even tried /affinity trick. No beans though.

[Splave]

holy sh1t, benching 3870 in 01...card at stock with just LOD 97.5k without run order 2600k at 5.5ghz. Thats good for 10th lol!

[Kal-EL]

holy sh1t, benching 3870 in 01...card at stock with just LOD 97.5k without run order 2600k at 5.5ghz. Thats good for 10th lol!
Fack, SOOOOOooooooo EASY a CHROLL BABY can DO IT!!!!!! :laughing:

[Splave]

w00t
http://hwbot.org/community/submission/2125094_splave_3dmark2001_se_radeon_hd_3870_102774 _marks?new=true

3870 has a special bios to go over 864 lol fought with that all morning

[Neuromancer]

I've tried everything imaginable except the top three things you listed. Dunno if they will do the trick but will try. I even tried /affinity trick. No beans though.

Been a long time.

IIRC, in XP you need to rename the file to like 3dmark06.exe or something and it should set affinity to all core on its own?

Other than that... only thing I can think of is to Chown that bitch

http://support.microsoft.com/kb/308421

[DrNip]

Been a long time.

IIRC, in XP you need to rename the file to like 3dmark06.exe or something and it should set affinity to all core on its own?

Other than that... only thing I can think of is to Chown that bitch

http://support.microsoft.com/kb/308421

Already tried that. It only does that in Windows 7 for me.

[Splave]

lets see how 1300core lightning takes to sandy :) results in bit

[DrNip]

Damnit man!

[Splave]

damn cars are kicking my ass lol!
1200/1300 max for cars low, 1250/1300 for cars high and nature can run 1300/1300 lol really weird

[thebanik]

damn cars are kicking my ass lol!
1200/1300 max for cars low, 1250/1300 for cars high and nature can run 1300/1300 lol really weird

wow!!!!!something strange going on there, thats exactly the opposite of how clocks behave in those benchies....

[Splave]

I think it was cold for too long. Its very volt hungry too. I feed it 1.62v :X

[Kal-EL]

I dunno, thats the kinda stupid ass wierd shit Fermi has always done to ME! F'n FERMI!!!!

[DrNip]

Just doing some generic runs on this 4870 to get me on the board with it. Will come back at a later date when I have time to tweak to squeeze the most I can out of it.

[69_Goat]

Hitting some of the 2D stuff the next couple of days.

Got a warm-up WP32m.

Added 1024m.

http://hwbot.org/community/submission/2125546_69_goat_wprime_32m_core_i7_extreme_980x_2s ec_952ms

http://hwbot.org/community/submission/2125566_69_goat_wprime_1024m_core_i7_extreme_980x_ 1min_33sec_593ms?new=true

http://www.overclockaholics.com/forums/attachment.php?attachmentid=4594&stc=1&d=1297747898

http://www.overclockaholics.com/forums/attachment.php?attachmentid=4595&stc=1&d=1297750543

[DrNip]

Ahhhh, finally in the 1,000 point club. :D

[Witchdoctor]

Congrats Travis :)

Awsome work bro

:kneelsuckers:

[OC Maximus]

Congrats!!!

:ola:

To 1000 more

:cheers:

[GeorgeStorm]

Congratulations!
Thats my next target, since atlast having got 500, and with a nice selection of HW here to bench ;)

[Neuromancer]

Wow! Nicely done, congrats on the 1000 boint :)

[ocgmj]

Nice work Goat & Nip. :thumbsup:

[Kal-EL]

Ahhhh, finally in the 1,000 point club. :D

:club:
Beat me to the punch you bastard :D

[Splave]

2x2500k will be here today :)
980x sold for $900 so direct CU 580 on order :) Daddy wants some heaven 01 and 03 loving!

[Splave]

sandy is def the grinders platform. ballin on a budget
http://hwbot.org/community/submission/2126387_splave_aquamark_radeon_hd_3870_353568_mark s?new=true

[Witchdoctor]

Dude,

you are like a machine bro ,,,,,,, churnin out cup after cup


:kneelsuckers:

[DrNip]

sandy is def the grinders platform. ballin on a budget
http://hwbot.org/community/submission/2126387_splave_aquamark_radeon_hd_3870_353568_mark s?new=true

Already know. Need to get me a GPU pot so I can start stealing some of these medals from others.

[OC Maximus]

8800 Ultra baseline test prior to vmod.

Aquamark - 349510 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @756/1152MHz) 15 points
3DMark06 - 20199 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @756/1152MHz) 19.1 points
3DMark05 - 32346 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @756/1152MHz) 15.6 points
3DMark03 - 58373 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @756/1152MHz) 10.3 points
3DMark2001 SE - 100584 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @756/1152MHz) 12.1 points

Couldn't get past Vantage CPU test for some reason. I'll run it again tomorrow :thumbsup:

HW Boints FTW :D

[Kal-EL]

noice action bro :)

[69_Goat]

Your a monster, OCM. :thumbsup:

[DrNip]

Nice OCM. I did the same with my 4870 but for some reason I can't pass 3d01 with it? Must be something in the air.

[Witchdoctor]

Think I killed my e6600 with out a boint to show for it ..... :ohcrap:

[Splave]

4870 PCS+ vmodded and rockkin!

[Splave]

directCU is such a beast lol! 975/1100 stock cooler normal ambient atm benching nature

Time to fillup the dewar :) first run going to use smartdoc only. Then I will proper mod it.

[Neuromancer]

Done with the 4870 already? Man I gotta learn how to bench 3d!!

[OC Maximus]

Your a monster, OCM. :thumbsup:
Thanks but I'm not the monster, the bot is and I just can't stop feeding it :picmonster::laughing:
Nice OCM. I did the same with my 4870 but for some reason I can't pass 3d01 with it? Must be something in the air.
Thanks dude. Whats it doing in 01?

[Splave]

wow got too comfortable around ln2 and got a bad burn on my hand.
My tube on the dewar blew off and my hand was getting blasted lol by the time I realized it my hand was frozento the point my skin was rock hard... hurts like hell. Please be careful !


/in before ln2 finger monster pic

[OC Maximus]

Safety first!

http://www.4outof5dentistsband.com/graphics/kitten%20licking%20paw.jpg

[Kal-EL]

oh fruck Splave, I hope its not bad bro, u should head to the E.R. just in case.

@ocm, sry bud, that screwed up finger pic gives me the heebyjeebys everytime I see it :P

[OC Maximus]

lol @ Kal

Hope your alright Allen

[ReverendMaynard]

take care of that Splave I know a few lads that lost fingers, toes, noses and other things not to be discussed from frostbite. If your skin turns rock hard you're beyond just minor frostbite.

http://www.merckmanuals.com/home/sec24/ch291/ch291d.html

Symptoms
Symptoms vary with the depth and amount of tissue frozen. Shallow frostbite results in a numb white patch of skin that peels after warming. Slightly deeper frostbite causes blisters and swelling of the affected area. Deeper freezing causes the extremity to feel numb, cold, and hard. The area is pale and cold. Blisters often appear. Blisters filled with clear fluid indicate milder damage than do blisters filled with blood-stained fluid.

[Neuromancer]

Ouch, blood sweat and tears :(

[Kal-EL]

I got splave on the phone and walked him thru some first responder first aid techniques. He should be back benching in a few minutes as soon as the PJ rub dries he'll be good as new, fixes all.

[Neuromancer]

PJ? Wouldn't cold water and Aloe be better? (EDIT: I meant cool water... but I looked it up and its body temp water you should use)

[Kal-EL]

I dunno man, I rub pussy on everything that hurts...
always makes ME feel better.

[Splave]

Update, its numb a little swolen, red and about and inch and a half by a half inch (kinda like kals schlong) jk jk thanks for the call bro :)

Was going to say better ice it har har,

[GeorgeStorm]

Glad it's ok, can't stop the benching machine ;)

[OC Maximus]

8800 Ultra Vmodded and on H20
2600k @ 5.32GHz on H20
Room temp 15c

Aquamark - 363591 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-medal.gif) 18.6 points
3DMark Vantage - Performance - 11402 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1215MHz) 3.4 points
3DMark06 - 20976 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1215MHz) 20.6 points
3DMark05 - 34093 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @810/1224MHzhttp://hwbot.org/img/trophy-medal.gif) 19.7 points
3DMark03 - 59507 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1224MHz) 11.1 points
3DMark2001 SE - 102636 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @810/1224MHz) 12.7 points

Setting up for SLI ;)

[kikicoco1334]

8800 Ultra Vmodded and on H20
2600k @ 5.32GHz on H20
Room temp 15c

Aquamark - 363591 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-medal.gif) 18.6 points
3DMark Vantage - Performance - 11402 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1215MHz) 3.4 points
3DMark06 - 20976 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1215MHz) 20.6 points
3DMark05 - 34093 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @810/1224MHzhttp://hwbot.org/img/trophy-medal.gif) 19.7 points
3DMark03 - 59507 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @792/1224MHz) 11.1 points
3DMark2001 SE - 102636 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 Ultra @810/1224MHz) 12.7 points

Setting up for SLI ;)

very nice!
i just got done benching the 3100+ and it's gonna end up with 9.5/12 passable points
trying to find my water block mount right now

[Witchdoctor]

Update, its numb a little swolen, red and about and inch and a half by a half inch (kinda like kals schlong) jk jk thanks for the call bro :)

Was going to say better ice it har har,


hope all is well bro, you should go get it checked bro

Be carfule with that shit man ......... :thumbsup:


OCM, way to tear it up :)

[Splave]

lol no mods!
http://hwbot.org/community/submission/2127551_splave_unigine_heaven___xtreme_preset_dx11 _geforce_gtx_580_2232.51_dx11_marks?new=true

I will take first later, boss is going to be home soon :X

[OC Maximus]

lol no mods!
http://hwbot.org/community/submission/2127551_splave_unigine_heaven___xtreme_preset_dx11 _geforce_gtx_580_2232.51_dx11_marks?new=true

I will take first later, boss is going to be home soon :X

Hwat the frack!! :shock: I need to step up my game big gime :blink:

Nicely done bro :clapping:

[Neuromancer]

DAMN... you are a monster.

[Kal-EL]

rofl, monster card!

[Splave]

Its too easy with that thing!

[OC Maximus]

x2 8800 Ultra's in SLI on H20
2600k @ 5.32GHz on H20

3DMark Vantage - Performance - 19680 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @783/1224MHzhttp://hwbot.org/img/trophy-silver.gif) 1.5 points
3DMark06 - 31409 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-silver.gif) 1.3 + 11.4 points
3DMark05 - 43290 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-gold.gif) 1.6 + 10.2 points
3DMark03 - 94702 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-bronce.gif) 5.9 points
3DMark2001 SE - 107999 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @792/1224MHzhttp://hwbot.org/img/trophy-medal.gif) 1.1 + 3.9 points
Aquamark - 327546 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 Ultra @792/1224MHz) 0.2 + 1.7 points

Not sure wth was going on with AM3. Couldn't get it any higher to save my life.

HD 4870x2 arrived today :D

[Splave]

^ beastin

[Dentlord]

Checking in to say great work guys and so sorry for my failure to bench...

Been down here working 15x7 on the Texas coast, all my hardware is still in boxes from the move.

You know Ill be back at it hard as soon as I get some room to breathe.

[GFDuke]

Nice work Splaver. Way to pave the way. I know what my next step is.

Still going to be a while for me also Dent. My gear is still all packed up in anticipation of my remodel. Things got stalled a bit due to the freakin shitty weather. We have so much snow i can't get a roll off in to toss out all the demolition. No sense in gutting the room with no place to toss the demo. Kind of sucks being at a standstill on this project. Then again the snowbanks are so high here that the LN2 truck couldn't even back up to my house to deliver it if i was benchin.
So i'm just hanging, doing some gaming and planning my next move. Kinda nice having time off from it all really. But the itch is growing and some withdrawals and starting to surface. Especially when Splaver starts throwing up scores like that.

[Splave]

my advice to you guys is to dump your 580s if you have em, direct CU pwns :) will be here when you guys get back!

[Splave]

of forgot to mention, taking heaven gold and destroying an 03 run tonight :) I love sandybridge on water for cpu :D

[GeorgeStorm]

I know I'm not in your team, but thought I'd post here to let you guys know what I'm up o, and duke might like to know how his card is getting on ;)
Some testing on air (daily rig)
http://hwbot.org/community/submission/2128062_georgestorm_3dmark03_geforce_gtx_580_11819 6_marks?new=true

http://i.imgur.com/5vl1P.jpg

[DOM]

nice George :thumbsup:

[GeorgeStorm]

Well, you gotta start somewhere :p
Having a go at 3D, but haven't really got the cpu power to make it worthwhile, am hoping to get to know the limits of the various cards I've got, and then I'm doing a SB build for a friend, so will 'test' his build before I give it to him :p

[GFDuke]

Nice job George. Looks like you're doing well with that card. Get yourslf some cold for sure.

[GeorgeStorm]

Yeah I'm liking it :D
Looking at getting DI to star with, having never used a card cold before, and so I can have a go with it before I use it with the SB (hopefully)
Will then use LN2 if all goes to plan :)
480 will be getting the same treatment ;)

[Kal-EL]

Yah, freekin nice card pumpin it up, good work G :)

[GeorgeStorm]

Thanks, don't think it's fully maxed out, might try pushing the voltage a bit more (was at 1.125v for that run)
Might try pushing the cpu a little more aswell, have benched at 4.4 before.
Need to get the fan to 100%, is a BIOS flash the only way?

[GeorgeStorm]

Have been getting less than 30k in 05 which I thought was rather poor, (i7@4.2, 580@900/2200)
Looked at afterburner afterwards, seems like the card wasn't clocking properly for the 3rd test, remained at 2D clocks (400/800) :/
What version of afterburner will let me increase voltage for the 580?
Tried a couple, including a voltage unlock, but nothing seems to work? Am using inspector instead.
Or is afterburner just misreading clocks?
Tried to run it at stock, got pretty much the same score, because afterburner says that it stayed at 400/800 all the way through :/

[Splave]

05 is a cpu test though too so low cpu speed = low score

whats OS?

[GFDuke]

Did you go into the AB config file and change the enableofficialverclocking to 1 instead of 0? But yea as Splave said. 05 is highly cpu and uncore dependant.
[Properties]
ShowGeneralTab = 1
ShowFanTab = 1
ShowMonitoringTab = 1
ShowOnScreenDisplayTab = 1
ShowScreenCaptureTab = 1
ShowProfilesTab = 1
ShowUserInterfaceTab = 1

[Settings]
Skin = default.usf
StartMinimized = 0
StartWithWindows = 0
RememberSettings = 0
FirstRun = 1
FirstUserDefineClick = 1
FirstServerRun = 1
HwPollPeriod = 1000
MMIOPageSize = 4
PCIBusFilter = -10h
ShowTooltips = 1
ShowHints = 1
PauseInSuspendedMode = 1
CurrentGpu = 0
Sync = 1
AttachMonitoringWindow = 1
MonitoringWindowOnTop = 1
ShowPerformanceProfilerStatus = 0
LCDFont = font4x6.dat
LCDScrollTimerPeriod = 30
UnlockVoltageControl = 0
UnlockVoltageMonitoring = 0
ShowOSDTime = 0
RestoreAfterSuspendedMode = 0
StartupViaTaskScheduler = 0
StartupDelay = 0
MinMonitoringGraphHeight = -1
LocalizationDebugFlags = 0
EnableLog = 0
RecreateLog = 0
LogPath =
DontStopLoggingOnWriteFailure = 0
LogLimit = 10
ForceConstantVoltage = 0
AllowCaptureVoltageDefaults = 0
Link = 1

[ATIADLHAL]
EnableUnofficialOverclocking = 1
AccessibilityCheckingPeriod = 0

[NVAPIHAL]
ClockDomainIdWorkaround = -1

[Splave]

did the PLL and mem+OCPmem, mods on this 580 lol a huge glob of sold jumped off the tip and splattered all over the mem controller area. Luckily it all chipped up pretty easy. Tested card and mods work. Will get it cold later

[GeorgeStorm]

Fair enough, and no I haven't. What version of afterburner is best? Just the latest of the website? Used to use a beta which wasn't that widely available if I remember correctly?
XP, just daily at the moment, just trying to get a feel for the card and benches more than scores overall.
Will do that now, I'm more concerned with it not going to 3D clocks though? :/

Edit:
Changed the config file, and nothing seems to have changed?
Was it meant to allow me to change the voltages?
Also, my config file doesn't have all of the lines you posted?

And glad to hear splave, would've been pretty bad luck if you'd accidentally killed the card :/

[Neuromancer]

The enableunofficialoverclocking is for ATI cards.

AS for clock limits. I have a 580 and running the latet AB I can clock way higher than is stable and have Voltage unlocked.

You can always flash it with another BIOS also and use a tool like smartdoctor.

[GeorgeStorm]

Hmm, using the latest from the website, I don't have any voltage control over the 580 :(
Yeah I could, inspector will do, especially since it now has monitoring aswell.

[Neuromancer]

Oh.. for forcing 3D clocks you can do that in nvidia control panel too.

[GFDuke]

That card has the right bios on it for going cold. I wouldnt flash it. Just remembered i used nvidia inspector for clocks. I had the hard mod done for voltage.

[GeorgeStorm]

Yeah I won't bother flashing the BIOS.
Will look into forcing 3D clocks.

[DOM]

best i could get http://www.hwbot.org/community/submission/2129103_dom._cpu_z_celeron_lga775_352_7680.44_mhz? new=true

[Splave]

Yeah I won't bother flashing the BIOS.
Will look into forcing 3D clocks.

http://www.xtremesystems.org/forums/showthread.php?t=267043 help?

awesome dom, what board?

[GeorgeStorm]

Don't seem to have that driver installed in any case :/
Although I know I did last time I installed these drivers. (266.68)
Will look into it more over the week, hopefully will hear about DI tomorrow, so I can start to do some cold testing.
Will try 06 and see if I get similar problems, may revert to slightly older drivers.

And great work DOM, always amazing to see high freq. results!
Commando?

[Witchdoctor]

Ta Dominator

Nice work bro.................. :thumbsup:

[thebanik]

would be testing 5-6 2600K's in the next couple of days. Hoping that luck would finally be on my side.

[DOM]

thanks guys :thumbsup:

p5b deluxe fully hard modded :)

its was my first ocing mb

idk wut happened but it doesnt show up what it is anymore

been like that for a long time :laughing:

[Splave]

benchin 03 atm :) 1370/1280 sandy at 5.585 which is pushin it for my chip...fails about %50 of the time lol but need the gt1 boost scores 166433 so far

[Witchdoctor]

Dammm bro .......

Your a Rock Star

:club:

[Splave]

lol thnx bro ended up 169k

heaven now 1325/1280 halfway thru so far should be first place

[Witchdoctor]

That card is sick ..........

Lightning who ????? :laughing:

[Splave]

2301 :) snaggin a backup quick now

i thought 1337 core was fitting rofl

[Witchdoctor]

witch1337@comcast.net

[OC Maximus]

TOP 5 MOST ACTIVE MEMBERS IN THE PAST MONTH.
Splave: 21 submissions worth 823.7 points

Dangit Splavemen, your an Animal!!!

[Splave]

lets see how sli works on this sandy chip :) should be win sauce for heaven not sure about 03 :) might need a 990x for that ;) ;)

[Kal-EL]

TOP 5 MOST ACTIVE MEMBERS IN THE PAST MONTH.
Splave: 21 submissions worth 823.7 points

Dangit Splavemen, your an Animal!!!

Now theres something you can get behind! :good:

[OC Maximus]

Evga 8600 GT on H20 (no vmod)
2600k @ 5.23GHz on H20


3DMark2001 SE - 62934 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @810/882MHz) 13.5 points
3DMark06 - 8295 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @810/882MHz) 13 points
Aquamark - 225841 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @810/882MHz) 11.5 points
3DMark05 - 16021 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @797/882MHz) 10.9 points
3DMark03 - 24417 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @792/882MHz) 9.1 points
3DMark Vantage - Performance - 2969 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8600 GT 256MB GDDR3 @810/882MHz) .05 points

Not a great clocking card. Mem sucks. Leads mod is done, will vmod as soon as vrs get here.

[Witchdoctor]

Gotta love the 8K series

Nice work OCM ................ :thumbsup:

[Kal-EL]

lets see how sli works on this sandy chip :) should be win sauce for heaven not sure about 03 :) might need a 990x for that ;) ;)

Friday, Sat, Sunday should be busy for you :happy2: :morpheus:

[OC Maximus]

Asus 3870 on H20
2600k @ 5.32GHz on H20

3DMark2001 SE - 101727 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1422MHzhttp://hwbot.org/img/trophy-bronce.gif) 22.7 points
Aquamark - 320944 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1404MHzhttp://hwbot.org/img/trophy-medal.gif) 12.4 points
3DMark Vantage - Performance - 6535 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1377MHz) 5 points
3DMark06 - 15263 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1377MHz) 17.5 points
3DMark05 - 27979 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1314MHz) 8.5 points
3DMark03 - 47034 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 3870 @857/1422MHz) 6.2 points

This card has super duper ram but a very limited core. No amount of voltage would get me past a 860mhz wall. Not sure why.

BTW, thanks WD. I'm having a blast :thumbsup:

[Splave]

damn bro that 3870 has nice ram! mine maxes nowhere near that!

[Splave]

SF3d flushed out my backup in heaven 2316 :D Just between us though I have run the card at 1338 on the mem through heaven easily which should be a nice boost :X

[DOM]

SF3d flushed out my backup in heaven 2316 :D Just between us though I have run the card at 1338 on the mem through heaven easily which should be a nice boost :X
SHES MAD :laughing: P.S I thought this backup s*** was left behind long time a go ;)

DID TWO RUNS TESTING OUT VMODS BOTH ON STOCK COOLER :P

3DMark06 - 20517 marks - DOM. (OCAlliance) (http://overclockaholics.com/community/submission/2130943_dom._3dmark06_geforce_8800_gts_512_mb_2051 7_marks) - (Nvidia GeForce 8800 GTS 512 Mb @849/1145MHz) 20.5 points (http://overclockaholics.com/rankings/overclocker/)

3DMark06 - 24477 marks - DOM. (OCAlliance) (http://overclockaholics.com/community/submission/2131003_dom._3dmark06_geforce_gtx_260_216sp_24477_ marks) - (Nvidia GeForce GTX 260 216SP @760/1200MHz) 18.5 points (http://overclockaholics.com/rankings/overclocker/)

THANKS TO OCM :thumbsup: THE NEW SOLDER WORKS ALOT BETTER

[Splave]

glad to see honda commenting on it :X