Aqua Computer Cuplex Kryos HF

[MaadDaawg]

Just picked one up cause it has mounting slots that will let you easily mount on your F1 standards on any intel socket size. My GTZ I had to change the bracket, My XT had too much back pressure, so I tried this one and like it. Core temps with wet ice in the chiller stay in low 20s at 4.5ghz on all 6 cores, significantly better than the GTZ.

Solid copper body makes it great for cooling and for looks. I'd a bought the silver version if Sidewinders had them :(

Anyway, good all around all socket CPU in the higher price brackets.

http://www.sidewindercomputers.com/aqcocukrrfso.html

[Neuromancer]

How do you mount that to an F1???

[ocgmj]

I believe he is talking about the back plate.

[MaadDaawg]

yeah, the back plate and the 4 screws that stick up to mount the F1. If you don't use the blocks mounting h/w you can just slide it down the F1 screws and then use the F1 h/w to tighten it down

[MaadDaawg]

Here's a pic - quality prolly not too good cause I used the cell phone. Really like this block and using it this way you can slip it on between LN2 sessions to download or tweak or tune :D Fit's any intel socket size (and amd but not sure how that would work with a pot setup?)

Pic worse than I thought :blush: I'll try and get a better one

[DrNip]

Are we on the Titanic in that pic? LOL

[MaadDaawg]

:rofl; yea, that's the waves crashing over the top on the right, and on the left you can just make out the red life rafts :rofl: Gotta find the battery charger for the good camera again :blush:

used two bitspower soft 90 black chrome to run the water over the side and back. Looks like shit, i know, but blow it up and it REALLY looks like shit :rofl:

[Kal-EL]

Are we on the Titanic in that pic? LOL
We got some of the wisest asses on the web me thinks, you guys crack me up alot! :laughing:

[MaadDaawg]

K - battery charged :)

The same mounting arms will slide down a 445 or 1155 set of F1 posts - nice and easy peasy :P

[MaadDaawg]

Wenn Ich erstenmal habe meinen Cuplex Kryos XT geschreiben uber, Ich war mit meinin Dragon F1 Boltz usar, nicht mit die Kryos Backplat oder die Randelschraube usen. I yetz gedank das the Kryos ist sehr shnell, Ich now dedenken das die Cuplex Montageanlaeitung ist ein ... ach du lieber, ich habe vergeessen :blink: Wenn on diesen site muste nur English gespreschen, so..

when I first wrote about this whore of a CPU water block, I had generally all nice things to say. It cools like a mother, and mounting it was no problem so long as I slid it down the mounts for my Dragon F1.

Today I tried it with the mounting kit that comes with it PAIN IN THE ASS!!!

[MaadDaawg]

Wenn Ich erstenmal habe meinen Cuplex Kryos XT geschreiben uber, Ich war mit meinin Dragon F1 Boltz usar, nicht mit die Kryos Backplat oder die Randelschraube usen. I yetz gedank das the Kryos ist sehr shon, Ich now dedenken das die Cuplex Montageanlaeitung ist ein ... ach du lieber, ich habe vergeessen :blink: Wenn on diesen site muste nur English gespreschen, so..

when I first wrote about this whore of a CPU water block, I had generally all nice things to say. It cools like a mother, and mounting it was no problem so long as I slid it down the mounts for my Dragon F1.

Today I tried it with the mounting kit that comes with it PAIN IN THE ASS!!!
:hater: it is virtually impossible, for me at least, to mount it according to the directions, which unfortunately are ONLY IN GERMAN. (fortunately I know some German :P)

Now I'm going to use the backplate and hold down feet off the swiftech GTZ and lock this badboy into place in my gamer.

jeeeez

[Kal-EL]

I don't read German, got pics?
Don't start another thread with the pics when you find them. Just look in the water cooling section for this thread ;)