A Supestember to remember

[RomDominance]

Lead by Supers and his epic wprimes...need I say more? Lets do this!

[Kal-EL]

Lead the way bro-chacho :good:

[DOM]

i got these two 4870&8800gtx to bench for this month :D

so bench what ever you can guys :thumbsup:

ps also try not to kill anything ;)

[Hondacity]

awhile ago it was a wrestling theme...now its mandy moore with superman kinda theme..lol

finally the hwbot comp is over....

its gonna be a 920 grudge match for me..i'll tweak it real good :D

[RomDominance]

There was a Star Trek theme in there for a bit also "the september deseption" but it was to Romulan for most humans to grasp, so again, I regress.

[Splave]

so I jumped into my time machine set for september 6th and found myself keeled over my computer in a pool of blood spewing from two holes in my chest.... I had literally bench my tits off.

off work friday-monday no plans ftw

[FACE]

so I jumped into my time machine set for september 6th and found myself keeled over my computer in a pool of blood spewing from two holes in my chest.... I had literally bench my tits off.

off work friday-monday no plans ftw

tits are terrible things to waste... :P

Hoping to be on a major s775 offensive the 2nd half of this month. Time will tell how that turns out
;)

[Dentlord]

Tested one e8600 today and it was a total dud ... -110CB and -85CBB :(

I think I got all of 12 boints for wprimes @ 5750 lol

Should get 8 or so more for 6380 cpuz 980x so a grand total of 20 boints for 25l of ln2

[GFDuke]

Hell ive been through about 400L of LN2 with nothing to show for boints. I need some hardware bad.

[Kal-EL]

Hell ive been through about 400L of LN2 with nothing to show for boints. I need some hardware bad.
Thats a little more than me. I just couldnt get anything usefull out of the 980x + GPU. But we still press on like lunatics.

Insanity= Doing something over and over again but expecting a different result :ohcrap:

[Jor-El]

Superb job Kal-El my friend! Congrats to RomDom and Splave also for the uncontested 1st place on the Asus competition. Even on a universe far far away I still have time to log-in every 15 days and be amazed with our team just going up a position every time.

I really miss benching and hopefully will be back one day.

Kal: #5 week in the bank :thumbsup: :cool3: :keeporder: DT kicks ass.

[Kal-EL]

EL! thx bro,
Keep schooling those noobs bro ;)

[Splave]

benched some AMD today :)
7750BE cb is -19.5c rofl

sempron 140 went well! Some decent boints, 3rd place wprime single core global :)

http://hwbot.org/community/submission/1048253_splave_wprime_32m_sempron_140_25sec_94ms?n ew=true

going to snag 1 or 2 more of these

[ocgmj]

Like always sick work :)

[Hondacity]

wow you just made those amd clockers look noob ...LOOOOOOL

AWWWWEEEESOMMENNNEEESSSSSSS!!!

[Patch]

Damn, I'm laggin and you guys are rockin.

Gonna ditch the 980x gig for a while and sell some GPU's. Wife turns 40 in November and I'll need a little extra cash for a romantic getaway to ease her pain......

Rex should arrive back soon from Henry - time to give Wolfdale another go.

[Splave]

new 980x came back today from rma, 3020a477 just like my brother rom doms stinker bahhh. Going to hit it right now once xp finishes installing. :)

[Neuromancer]

benched some AMD today :)
7750BE cb is -19.5c rofl

sempron 140 went well! Some decent boints, 3rd place wprime single core global :)

http://hwbot.org/community/submission/1048253_splave_wprime_32m_sempron_140_25sec_94ms?n ew=true

going to snag 1 or 2 more of these


Did you have to mod the board? I have been looking around for a good 400+ HTREF capable board :)

[Splave]

nopers :)

[Neuromancer]

Awesome! Going to pick one up then :)

[Splave]

lmk when you do I will send ya the chip :)

[Neuromancer]

I got a 140 already that can run up to 300 HTREF on air

Plus it unlocks ;)

'Preciate the look out though :)
It is in my HTPC atm, once I get a thuban/zosma I will pop the 555BE in there. (I beat that thing to death anyway)


EDIT: Cant find the board anywhere.. Found the XT and the XTA though

Will keep looking for a good htref board I guess.

EDIT EDIT: Holy crap HW sharing much? Look at the top 5 wprime 1024 scores for the sempro 140 (single core)

All 5 from same team with same mobo.

[Splave]

^yeah I laughed at that, some pretty blatant shit on the bot these days. Team Katana as well is pretty sad.

[TheDarkN8]

Been tied down with school/work, wtf am I supposed to do with this cold shit again?:blink:

3211

Gimme a sec, I"m gonna brb, Break Records Bitches! :wt:

[HITandRUN]

^yeah I laughed at that, some pretty blatant shit on the bot these days. Team Katana as well is pretty sad.

Looks like I'll be coming to bench pretty soon so we can SHARE! :D ;)

[Kal-EL]

Been tied down with school/work, wtf am I supposed to do with this cold shit again?:blink:

Gimme a sec, I"m gonna brb, Break Records Bitches! :wt:
Shoulda woke me up dumbass, I coulda poured for you, and wtf is this Jack Antenna ball doing on my F1? :smackbum:

Nice pics btw, I see you found the Asus t-shirt, lol, but your girlfriend isn't allowed in the man cave, not even to take pictures! :keeporder:

Edit: you're dead meat kiddo, that chip was expensive.

[RomDominance]

Klingon blood splatter on the walls once again? Glad the xeon was in the air at this point, lol.

[Dentlord]

Took a lot of ln2 (~40l) but I got a good 2xgpu score

http://hwbot.org/community/submission/1052220_dentlord_3dmark_vantage___performance_2x_g eforce_gtx_480_50076_marks

I got through the gpu tests @ 1200 core easily, but lost my bluetooth ROG connection and crashed the cpu :( ... LOTS of foul language on the livestream lol

After that it was so iced over nothing would run and I started getting nervous for my r3e so I bailed out till next time.

[RomDominance]

Nice work Joey! +50k on sli Vantage....SICK!:shock:

[Kal-EL]

Sick top five score Joe-chacho :D

[Dentlord]

The cards have more to give, that was only 1.3v and -120ish. Passed up to 1220 core but having cpu issues at the end.

Everything is in the oven, gonna get back at it tonight, probably '03

[Kal-EL]

The cards have more to give, that was only 1.3v and -120ish. Passed up to 1220 core but having cpu issues at the end.

Everything is in the oven, gonna get back at it tonight, probably '03

Can I change your username to 3DLord? hehe, you're rockin it! :good:
Hope I catch the next stream.

[Dentlord]

Can I change your username to 3DLord? hehe, you're rockin it! :good:
Hope I catch the next stream.

Hehe, I hardly feel like a lord of anything after the boint losses Ive taken the last few months, but thanks for the sentiment ;)

As long as I didn't kill anything with all the ice/frost/water I'll be back up this evening.

BTW I was freaking loving ROG connect via bluetooth to my android phone ... UNTIL it cost me a massive vantage run when it dropped the link :( back to hardwire for now, but that is a really cool feature!

[Kal-EL]

Hehe, I hardly feel like a lord of anything after the boint losses Ive taken the last few months, but thanks for the sentiment ;)

As long as I didn't kill anything with all the ice/frost/water I'll be back up this evening.

BTW I was freaking loving ROG connect via bluetooth to my android phone ... UNTIL it cost me a massive vantage run when it dropped the link :( back to hardwire for now, but that is a really cool feature!

I know right, I'm waiting for the app to come out on the i-phone!

[Hondacity]

WTHHH Bluetooth you guys are wireless LOL

i missed watching dentvision double pour :(

[RomDominance]

ummm....TRIPLE POUR!

[Dentlord]

Just added caps to the second card, everything is wrapped up and mounted again.

Gonna fire up empty and reinstall drivers to be safe, then itll be ready to rock and roll again :D

[Dentlord]

Ok that session was horrid, my golden boy 480 is on its last legs I think :(

Gave up quickly on 3d and switched to trying to run spi 32m lol

Knocked 13 seconds off my time, still not great but something productive:

http://hwbot.org/community/submission/1052409_dentlord_superpi_32m_core_i7_980x_6min_44s ec_953ms

[Splave]

I know right, I'm waiting for the app to come out on the i-phone!

it exists, ask travis and he can probably get it for you :thumbsup:


Dents back! !@!@%!@% awesome job bro, olive theme is your friend for a couple more seconds ;)
I cant wait to start benching this lightning when I get home!

[Hondacity]

http://itunes.apple.com/app/rog-idirect/id389745899?mt=8

brian just pm'd me lol

[Kal-EL]

http://itunes.apple.com/app/rog-idirect/id389745899?mt=8

brian just pm'd me lol

Lies! :P

[Dentlord]

Maximus 3 Formula and 655k inbound for benching later in the week, and a Sempron 140.

love new toys to play with :D

[Neuromancer]

You have an AM2 board for that sempron?

[Hondacity]

Lies! :P

its true ...ask brian@asus;)

[DrNip]

You have an AM2 board for that sempron?


?

Far as I know Sempron 140 is AM3. Need to pick me one up.

[Neuromancer]

?

Far as I know Sempron is AM3.

Yup, but there are no high HTREF clocking AM3 boards that I am aware of.


Am2/+ and DDR2 are the only way to pass 4GHz IME

[DrNip]

Gotcha. Prolly need to score a Gigabyte mobo as that appears what peeps are using on w/prime.

[rickss69]

Here you go Nip... http://hwbot.org/community/submission/934515_rickss69_wprime_32m_sempron_140_15sec_910ms

[Neuromancer]

Gotcha. Prolly need to score a Gigabyte mobo as that appears what peeps are using on w/prime.

Yeah I am bidding on one right now on ebay :)

Going to grab some Ath II chips as well i think ;)

[Patch]

Lots o plans but not enough time......hope to get some productive benching in for the first time in months.

1) Time to refill dewars to tinker with 275 lightning again.
2) 920 that looks like a decent clocker is incoming. (My 24/7 920 is a first generation C0). If it clocks well, it may finally be worth freezing the C6 doms. These sticks were the best $450 I've spent in the last 6 months. Good RAM is like warm butter for overclocking and I haven't wanted to risk em until I have a setup worthy of the endeavor.
3) 4870 incoming.
4) Trying to decide whether to RMA for a 6th try at a good 980x.......or just sell it now and be better positioned for the next latest and greatest....

[DrNip]

Yeah I am bidding on one right now on ebay :)

Going to grab some Ath II chips as well i think ;)

I seen a udp4 over there.

[Neuromancer]

Yeah I finally found one on there today. Its at $30 right now...did have a BIN on it earlier should have paid that instead of waiting for the auction to end.

[kikicoco1334]

Hell ive been through about 400L of LN2 with nothing to show for boints. I need some hardware bad.
:shock:


benched some AMD today :)
7750BE cb is -19.5c rofl

sempron 140 went well! Some decent boints, 3rd place wprime single core global :)

http://hwbot.org/community/submission/1048253_splave_wprime_32m_sempron_140_25sec_94ms?n ew=true

going to snag 1 or 2 more of these
nice work!


Been tied down with school/work, wtf am I supposed to do with this cold shit again?:blink:

3211

Gimme a sec, I"m gonna brb, Break Records Bitches! :wt:
is that you dude?


I know right, I'm waiting for the app to come out on the i-phone!
or i touch! :thumbsup:


http://itunes.apple.com/app/rog-idirect/id389745899?mt=8

brian just pm'd me lol
damn dude! i am so gonna get that!



oh yeah one more thing..
GAME ON!
i am so in!
got new boards and getting more new things =)

[Dentlord]

I just dropped the hammer on a q3fe !!

Go big or go home baby ;D

[DOM]

wuts a q3fe ??

[RomDominance]

An ES 980x

[DOM]

must be nice lol

also congrats on the wr rom :thumbsup:

[RomDominance]

Thanks Dom. It took 7 sessions and 75 liters to catch our fearless leader...no easy task.:shock:

[DOM]

but u did it and never gave up and i didnt get to watch it :( oc told me was working just going home

so did you got for the 1024 wr ?

wife dont let me play with my r3e just got it today T_T

[RomDominance]

Gonna hammer out some 1024m and 32m spi tomorrow mornin. Livestreams are recorded and today session lasted less than a half an hour I think...only a 5 liter session, gotta love that.

[Splave]

I hope it wasnt this guy joey
http://cgi.ebay.com/Intel-Core-i7-980X-EE-ES-Gulftown-FREE-SHIPPING-Q3FE-/140450673660?pt=CPUs&hash=item20b38333fc

he bins for the big guys and sells the junk at lower prices. told me a good 6.4ghz chip runs around 1500 :(

[Kal-EL]

Yep, the Romulan benched his ballz off and stole my precious from me :rroulette:.
Good Job Rom :good: (next time I keep the secret backup score secret :finger: )

Hehe :cool3:

[kikicoco1334]

I just dropped the hammer on a q3fe !!

Go big or go home baby ;D

indeed :thumbsup:

[Neuromancer]

Thanks Dom. It took 7 sessions and 75 liters to catch our fearless leader...no easy task.:shock:

Dang, thats like 80 cents on the $100 mark.. Who says LN2 is inefficient :)

[Dentlord]

I hope it wasnt this guy joey
http://cgi.ebay.com/Intel-Core-i7-980X-EE-ES-Gulftown-FREE-SHIPPING-Q3FE-/140450673660?pt=CPUs&hash=item20b38333fc

he bins for the big guys and sells the junk at lower prices. told me a good 6.4ghz chip runs around 1500 :(


Christ, guess I just threw another grand in the trash :(

Fucking ES game, why can't they just ban them from the bot like the should be??

[Splave]

dont worry joey, the worst q3fe's are better than most retail anyways, you never know man :)

[DrNip]

Don't count your chicks before they hatch bro. You might have a germ right there.

[RomDominance]

Yep, the Romulan benched his ballz off and stole my precious from me :rroulette:.
Good Job Rom :good: (next time I keep the secret backup score secret :finger: )

Hehe :cool3:

Sorry my brother from another mother....its all gewd!
Snagged teh second global gold cup this morning, almost up to 800bts baby!:shock:
3364

3365

Lets see if I get any play time in the headlines, prolly not.

[Splave]

nice rom :)

[Neuromancer]

Grats Rom! Nice job

[Patch]

Nice ROM!

Good luck Joey! Hope yours turns out better than mine. Here's what ultimately ended up happening to the $1000 I gave to that guy. Looked like it was gonna clock great until it died......

http://img201.imageshack.us/img201/6794/razer980x.jpg (http://img201.imageshack.us/i/razer980x.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)


On a more Supestember note, here's my meager contribution so far.......

http://img844.imageshack.us/img844/3641/3d01watermarked.jpg (http://img844.imageshack.us/i/3d01watermarked.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Splave]

awesome patch! 3dmark01 is my nemesis lol only bench I dont really understand at all


Looks like all this gulfi will do is 5.6ghz vantage and 06 cpu test. Could be worse, could be 5.3 like our ES at the contest :laughing: 1.7v -135 is sweet spot. Idk why but as I increase volts over that the cold bug gets lower and lower, same with frequency. Weird


Mounting the pot on the lightning as we speak :D

[thebanik]

awesome work ROM, somehow I missed your climb and recent scores, amazing work bro...proud to be in a team like this, :)

[Dentlord]

The guy I bought the A0 from just emailed me, he said he is no longer binning due to "some problems with "famous" guy" ... now he just tests them on air and sells them all @ the same price. This is according to him of course, but I almost believe it?

He said he was at MOA to bring some cpus to team Brasil, and also said he met Splave and Steponz there (or saw them there?)

Check out what some people get to play with, he sent me a pic lol

http://overclockaholics.com/forums/attachment.php?attachmentid=3369&stc=1&d=1284539599

[Kal-EL]

The guy I bought the A0 from just emailed me, he said he is no longer binning due to "some problems with "famous" guy" ... now he just tests them on air and sells them all @ the same price. This is according to him of course, but I almost believe it?

He said he was at MOA to bring some cpus to team Brasil, and also said he met Splave and Steponz there (or saw them there?)

Check out what some people get to play with, he sent me a pic lol

http://overclockaholics.com/forums/attachment.php?attachmentid=3369&stc=1&d=1284539599
Okay, just barfed in my mouth, thx Denty, got a breath mint cuz I think its gonna happen again. :greensick:

[DrNip]

Wow!

[Splave]

thats awesome



The lightning wasnt clocking at all :( no CBB or cold slow which was nice. There was nothing I could do to get it to bench past 1200. I had a hairdryer setup and everything, pcb was nice and almost warm to the touch.

Im praying its a bad mount, got alot of the stupid as tan screen or just straight up freezing about 10s into vantage every time. Wasnt pushing mem either just at 1100mhz. ugghh fuck a duck


EDIT: mount was perfect, something is not right here.......

[Splave]

The guy I bought the A0 from just emailed me, he said he is no longer binning due to "some problems with "famous" guy" ... now he just tests them on air and sells them all @ the same price. This is according to him of course, but I almost believe it?

He said he was at MOA to bring some cpus to team Brasil, and also said he met Splave and Steponz there (or saw them there?)

Check out what some people get to play with, he sent me a pic lol

http://overclockaholics.com/forums/attachment.php?attachmentid=3369&stc=1&d=1284539599

I hope he isnt bullshitting you dude. He just sent me a message and said he has a 6.3ghz+ chip for 1200 :blush:

[Dentlord]

I hope he isnt bullshitting you dude. He just sent me a message and said he has a 6.3ghz+ chip for 1200 :blush:


He probably is, just trying to take the sting out of wasting $1k on an impulse lol

[Hondacity]

did elmor's setup included additional caps at the back of the lightning?

[Splave]

nope stock card, and voodoo magic sauce

[Kal-EL]

Nothing missing from the pcb?

[Splave]

haha this isnt gigabutt

[Hondacity]

gigabyte soc = gigabutt suck

[ocgmj]

Props to RomDoggg :thumbsup:
3373

[kikicoco1334]

The guy I bought the A0 from just emailed me, he said he is no longer binning due to "some problems with "famous" guy" ... now he just tests them on air and sells them all @ the same price. This is according to him of course, but I almost believe it?

He said he was at MOA to bring some cpus to team Brasil, and also said he met Splave and Steponz there (or saw them there?)

Check out what some people get to play with, he sent me a pic lol

http://overclockaholics.com/forums/attachment.php?attachmentid=3369&stc=1&d=1284539599


WTF! dude! that's so many chips! good god!

[Splave]

2 more sempr0n 140s comming :) we need all wprime wr's

[Neuromancer]

FYI... those are not rubber bands on the trays... those are dual QPI chips LOL

[Splave]

yeah he sells 5677's in pairs for $1700

[kikicoco1334]

yeah he sells 5677's in pairs for $1700
:shock:
most people sells that thing from anywhere between 100 and 1500 each

[Kal-EL]

yeah he sells 5677's in pairs for $1700

Those trays look familiar...........

http://www.overclockingalliance.com/Kal/Trays_Trays_Trays/too_many_2_bin.JPG

[Splave]

I see what ya did there ;) good plan my friend

[RomDominance]

OCA TRAY GAROUNTEEED TO BLOW THE COMPETITION AWAY!:taunt:

[Dentlord]

Testing new maximus + 655k today

CB -139 :(

[DrNip]

Testing new maximus + 655k today

CB -139 :(

What RAM you using? 2000MHz?

[Hondacity]

Testing new maximus + 655k today

CB -139 :(

just like my i5-680

[Dentlord]

What RAM you using? 2000MHz?

Yeah Blades

so far 6ghz wprime @ 1.7vcc

[Hondacity]

nice photoshop kal ...lol

[Neuromancer]

nice photoshop kal ...lol

:O

Says picture was taken with a KODAK Z650 ZOOM DIGITAL CAMERA no mention of PS

[Splave]

Testing new maximus + 655k today

CB -139 :(

Damn did bren order it for you or something? :bs1:
doesnt mean it sucks

[Dentlord]

6.1ghz wprime 1024 @ 1.7vcc :) so far...

[Kal-EL]

These chips have cb's on some chipsets but not on others.........

[Kal-EL]

nice photoshop kal ...lol

Wouldn't have a clue on how to use photo shop, I know how to use smilies tho- :finger:

[rickss69]

^ HeeHee!

[Dentlord]

OK this is nice, 6.2ghz wprime SAME volts!

[DrNip]

Nice Joey! Can't wait to get mine chilly too.

[Splave]

keep pushing joey!

[Kal-EL]

OK this is nice, 6.2ghz wprime SAME volts!

Oh yah thats nice :D
If you get a chance Joey, can you start an OC thread with screenies and progression ? :D

[Dentlord]

Oh yah thats nice :D
If you get a chance Joey, can you start an OC thread with screenies and progression ? :D


Ah sorry supa, got caught up in it and missed this!

Some nice results for first session with a new board and chip

http://hwbot.org/community/submission/1054089_dentlord_wprime_32m_core_i5_655k_7sec_437m s

http://hwbot.org/community/submission/1054091_dentlord_wprime_1024m_core_i5_655k_3min_57 sec_859ms

Also got a 6850 cpu-z which I havent submitted yet ... I need it for my bot profile AND the Tom's contest ... I dont think you can submit the same file twice ... not sure what to do :/

[DrNip]

Damn 6850!

[Dentlord]

Damn 6850!

Well, almost

http://valid.canardpc.com/show_oc.php?id=1393796

[DrNip]

Monster man. :picmonster:

[Patch]

Damn nice clockage.

[Neuromancer]

Insanity... way to go man!

[Hondacity]

asus headlinessss

dang

nice one mr dento

that formula board is amazing..what revision is it?

[Dentlord]

It is definitely a nice board ... rev 1.02G

This cpu is amazing too, if only it were in the hands of someone who knew wtf they were doing! :laughing:

One thing though, spi refuses to run... I can run wprime 1024 200mhz higher than I can run spi 1m LOL

[DrNip]

I will gladly take the chip off your hands when done with it dent. ;)

[Dentlord]

Hehe you may not want it, it had 2v through it within 1.5 hours of the box being opened :D

[Hondacity]

It is definitely a nice board ... rev 1.02G

This cpu is amazing too, if only it were in the hands of someone who knew wtf they were doing! :laughing:

One thing though, spi refuses to run... I can run wprime 1024 200mhz higher than I can run spi 1m LOL

try higher qpi... but it will adjust your cb/cbb

also delete the *.dat files

[kikicoco1334]

rich people

[Hondacity]

:DWouldn't have a clue on how to use photo shop, I know how to use smilies tho- :finger:

i'm jusss kiddin boss...

[Dentlord]

Just snagged a 5770 from Craigslist for some hw boints :)

[Splave]

benched some 920 this morning :) did okay, reallly likes pci-e on the r3 e

[Kal-EL]

I was jacking some Redonkeyless and 980x action tonight but Fermi was "Redonkeyless" and did all sortsa crazy shit so I worked on my cpu clocks but I think I was a lil light on IOH Vcore. Either way, had to shut down, was running too long and frosted all over, thx fermi.

I'm up to 6030mhz 6c6t for 3D03 @ 1.72vCore. What kinda nb volts you folks been giving above 6ghz?

[Splave]

I usually am around 1.45v kal :) 6ghzs 3d is no small feet especially with chips of late


the 920, I was pushing 248x21 at 125pci-e speed...then tryed 130 hit 255x21 but get ntfs bsod's think my vertex 2's are crapping out. Was just thinking I should run off the marvell controller next time right? thats not affected by the pci-e mhz correct?

[Dentlord]

I usually am around 1.45v kal :) 6ghzs 3d is no small feet especially with chips of late


the 920, I was pushing 248x21 at 125pci-e speed...then tryed 130 hit 255x21 but get ntfs bsod's think my vertex 2's are crapping out. Was just thinking I should run off the marvell controller next time right? thats not affected by the pci-e mhz correct?


Wowsa, I keep IOH around 1.25-1.3v, mebeh I needz to up it!

That is SICK pcie speed, I think you are right about running the other controller ports for HDD when pushing pcie.

[Splave]

helped with pifast atleast :)

PiFast progression on r3e w/980x
Basic settings
980x x33 multi
ram 2:10 7-8-7-19


Settings that change are mentioned, if not assume its the voltage from previous run.


33x185
1.828 vcore
1.65 CPU pll
1.488 vtt
1.35v ICH
PASS

33x187
PASS

33x188
FAIL BSOD

33x188 - Bumped vcore only
1.878 vcore
PASS

33x190
FAIL ERROR in computation

33x190 - Bumped PLL down
1.601 CPU pll
PASS

33x191
FAIL FREEZE Screen

33x191 - Bumped vcore and vtt
1.892vcore
1.495vtt
FAIL FREEZE Screen still

33x191 - Bumped ICH
1.495 ICH
PASS

33x193
FAIL BSOD

33x193 - Bumped Vcore and ICH
1.925vCore
1.55v ICH
PASS

Conclusion, pump the ICH voltage 1.55-1.6v ICH and lower the CPU PLL, even down to 1.55v CPU PLL.


Blasting ram voltage did nothing for me, just caused errors. Hope this helps someone

[Patch]

Kal, I've tried 1.25 to 1.6 on ioh and it seemed to do best at 1.35 to 1.4 range.

My 920 arrived yesterday so I'll be joining you soon Splave.

But I prepped the REX last night with a NB pot so will be doing that first......trying to decide whether to freeze the RAM too for 01.....

Off to Monterey and Santa Cruz for a few days. Benching upon return.

[RomDominance]

Safe travels Patch.
Ive got the 655 on the formula ready for cpuz this morning.

[Splave]

Hit it nig rofl call ya in a bit

[RomDominance]

So a short three liter session this morning. This 655k's cb is @-122, just shuts down system at that temp:Dizzy:....got it up to 6450MHz:blink: but thats all she has in her. New chip on the way from the egg.

[Splave]

So a short three liter session this morning. This 655k's cb is @-122, just shuts down system at that temp:Dizzy:....got it up to 6450MHz:blink: but thats all she has in her. New chip on the way from the egg.

http://overclockaholics.com/forums/attachment.php?attachmentid=3388&stc=1&d=1284743748
:wh2::wh2::wh2::wh2::wh2::wh2::wh2:

[Splave]

picking up my new baby w3680 from fedex in 10 minutes w00t.
If CB is warmer than -120, wrists will be cut and I will never global boint chase again!



or


I will rma it lol either one

[Kal-EL]

Wrists are slashed, this is definitely a Supestember I will definitely remember.
The icy toppings: The only ln2 filling station on the island is moving locations so no Filly the Dewars for "about" a week. WTF is "About"? Is it a week or not! Knowing those jackturds it'll be two weeks. My normal discount is out the window too, time to put the uniform on again and make some friends at the new location ;)

[Dentlord]

My a0 should be at the house waiting for meh :D

GL with the xeon Spligdog!!

Just picked up 3 gold cups and a buncha boints for the team with the 5770 epic 1300 core ftw :D

[Witchdoctor]

Nice work guys .... hitting it hard ..... :thumbsup:

[Splave]

uh oh batch 3013A739 lol wtf?

[Kal-EL]

Got a quote from another ln2 supplier, $11.14 per liter :D

[ocgmj]

$11 that's worse than here... :ohcrap:

[FACE]

Got a e6750 in the mailbox today... the envelope was tattered and might have had a skidmark on it... the underwear kind, not the road kind.

It not a placer, but she runs rock solid @ 4480 mhz. that's a quick 60 boints for 60 bucks.... nice trade off imo. finishing it off tonight and it's back to packing :thumbdown:

[Dentlord]

q3fe is officially in the mobo, f1 is in the oven toasting, gonna be a late night ...

[Kal-EL]

Joey u are my favorite overclocker by a long long shot bro. Hardware shits itself by mere mention of your name. When my chip isnt behaving, I simply threaten it that it'll be shipped to Joey and it starts behaving agin :P

Awesome bot destruction with that 5770!

[Dentlord]

Joey u are my favorite overclocker by a long long shot bro. Hardware shits itself by mere mention of your name. When my chip isnt behaving, I simply threaten it that it'll be shipped to Joey and it starts behaving agin :P

Awesome bot destruction with that 5770!


LOL thanks Supa!

I bought that card for $100 on a whim last night, it clocked like poop on air.
Then after a vmod and some cold sauce it was bangin' 1300/1325 with no sweat :)

I need to re-run vantage and 06 with it another time, board was so frosty by the time I ran those I could barely get it to post lol

[DrNip]

Joey u are my favorite overclocker by a long long shot bro. Hardware shits itself by mere mention of your name. When my chip isnt behaving, I simply threaten it that it'll be shipped to Joey and it starts behaving agin :P

Awesome bot destruction with that 5770!
ROFL!!!! Ain't this the truth man.


q3fe is officially in the mobo, f1 is in the oven toasting, gonna be a late night ...
May the overclocking gods be with you on this chip man!

[Dentlord]

Well the gods were with me, unfortunately they had their collective boot up my ass.

It all started nicely, got my best spi @ 6250 (6.625s), was going to run some 32m when it bluescreened and never posted again.

Stuck at cpu initial ...

Thaw it out and pray for tomorrow...

[ocgmj]

Oh that sucks Dent! Hope it works out for you.

[Dentlord]

Ok its alive at least ... hooked up the phase to it and its up and running.

I still dont know why it took a shit just now though.

CB was -145 and CBB was -115 (ouch) makes for a lot of torching.

I was all excited, nice to beat my best spi time within 15 minutes of installing the cpu lol

http://overclockaholics.com/forums/attachment.php?attachmentid=3389&stc=1&d=1284782243

[Kal-EL]

Woot! Dodged the bullet on that chip, lol.

[Splave]

more volts!

[Dentlord]

more volts!

LOL come on man, you know the feeling of clocking an A0, like a ticking time bomb ... "how long do I have until its a $1k desk ornament"

Trying to take it easy on her instead of my normal brute force reaming.

[Splave]

gotcha :)
my chip...... -118cb -75cbb
Im like done with this gulftown fucking bullshit

[Dentlord]

gotcha :)
my chip...... -118cb -75cbb
Im like done with this gulftown fucking bullshit


The q3fe that you had or your new xeon ???

Sucky :(

[Kal-EL]

gotcha :)
my chip...... -118cb -75cbb
Im like done with this gulftown fucking bullshit
:Dizzy:

[Splave]

new xeon
wprimes 5.2ghz 1.58v -80c but nothing I can do to make it like cold better
maybe I will try it in the xpower?


threw my first 655k into the maximus and -170cb -155cbb. Wont do over 6.3ghz but didnt hammer volts 1.85v board needs a new bios, it drops imc voltage to 1.1v random and read point had my ram at 2.5v lol retarded. Gonna try the other later or tomorrow, still have to run the lightning with my ass sucker 980x. HW points ftw...........

[Dentlord]

Spent a little time on 32m tonight with the last of my ln2 ...

This a0 is siiick, no problem running 32m at 6.2ghz, ram @ 2000 and uncore @ 4600 :D

The problem is I SUCK, need to install chuch's xp and do some proper tweaking.

Here is my suck ass run (for the speed)

http://overclockaholics.com/forums/attachment.php?attachmentid=3398&stc=1&d=1284860110

[FACE]

Damn, Dent... You have the hw Midas touch, I swear to God....

.... I should have everything I buy go to your place 1st, so you can touch it, put it back in the box, and ship it to me... :laughing:

[Dentlord]

Damn, Dent... You have the hw Midas touch, I swear to God....

.... I should have everything I buy go to your place 1st, so you can touch it, put it back in the box, and ship it to me... :laughing:

LOL actually I have mediocre luck at best ... I just buy a ton of shit and some of it turns out ok ;)

Out of 3 980x, two are not great and one (the ES of course) is good.

[Neuromancer]

Chuchs OS made no difference to my scores.. going to try tiny 9 next.

TBH I think it aint about the OS you install but how you tweak it. Missing shit from the OS only saves HDD space. If you stop it from ever running whats the time gain?

I am trying rev9 next, still cant touch FLP (unless you count install time.. one of these days I will figure out how to use the image maker for that (uses Vista winbom imaging tech with XP SP2 code... so nlite... oooo never tried vlite...)

Doubt it will work.. it has the tools built in to make unattended disks.. I mean too... just have not yet...

[Hondacity]

dent thats a 5minute cpu.....ask the brotherhood to help out..i'm sure you'll beat splaves 6minute run .:D

[Patch]

Might be a long night.

Freezing CPU and GPU.

And NB.

And RAM. :D


Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up.......

[Kal-EL]

Might be a long night.

Freezing CPU and GPU.

And NB.

And RAM. :D


Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up.......
:Dizzy: Git er dun homie :D

[Neuromancer]

Best wishes patch :)

[RomDominance]

Might be a long night.

Freezing CPU and GPU.

And NB.

And RAM. :D


Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up.......

Best of luck tonight Patchmaster...make sure to look at Vivi's 01 thread (http://overclockaholics.com/forums/showthread.php?t=691), lots of great info in there.

[RomDominance]

Along another line, Arizona Wildcats #24 just defeated the Iowa Hawkeyes #9 34-27!!!:owned2:

[Neuromancer]

Hope my team does as well in 8 hours 15 minutes :)

[Dentlord]

Check out what happened when I pulled the pot off one of my 480s...

Fermi topless ;)

http://overclockaholics.com/forums/attachment.php?attachmentid=3400&stc=1&d=1284890747

[Kal-EL]

Good, now you can get better contact!

Janks fermi did the same thing too :P

[DrNip]

Was held on by elmers glue?

[Patch]

http://img255.imageshack.us/img255/6609/3d01118k.jpg (http://img255.imageshack.us/i/3d01118k.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img820.imageshack.us/img820/7958/01rig.jpg (http://img820.imageshack.us/i/01rig.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img844.imageshack.us/img844/4028/01flag.jpg (http://img844.imageshack.us/i/01flag.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Dentlord]

WOW!

Great job Patch :o

[rickss69]

Like your funnels - Are they rolled up neoprene sheets or something similar?

[Splave]

rofl, just tryed to bench lightning and couldnt get passed 1050 even just in 2d.............you should have seen the contact lol foam was keeping the pot woops. Thawing and trying again in an hour.

[Splave]

nvm it still sucks a fattie. 1150/1150 was the best it could pull in 06 :( and vantage. that was with +350vgpu and +250vmem -160c

[Patch]

Thx Rick. I cut up a cheap foam hat. Wife looked at me funny when I bought it. Then looked at me more funny when I said it was for overclocking.


Bummer Splave.

[FACE]

nvm it still sucks a fattie. 1150/1150 was the best it could pull in 06 :( and vantage. that was with +350vgpu and +250vmem -160c

I take it that opening up pci-e freq doesn't help?

[Splave]

nope, went up to 115 without change broham :)


benched from 5am to noon = 0 boints
lightning failed for 3 hours
then tryed the w3680 in the xpower, chip sucks ass still
now im waiting for shit to air out before I suck at overclock the 655ks

[DrNip]

Ain't nothing worse than having a FAIL session.

[Splave]

Im a perpetual fail machine it seems as of late.

[Patch]

http://hwbot.org/community/submission/1055517_

This set up is officially maxed out. I still suck at this bench - should have better score with these speeds.

But I'm not gonna get one without a couple hundred liters of LN2 and another week straight of tinkering with test order, customized clocks for each test and customized LOD. Not to mention switching to an IDE drive.

PCIE 115 - at 116 I can't save to hard drive, submit online, or even open GPUZ.
NB coldbugs at -25
CPU at -150
GPU full pot without coldbug throughout, but won't take more than 1.62 Gpuv or 2.12v ram.
Freezing the RAM was pointless because my timings and speeds were limited by CPU/mobo. I can run it at C7 2000mhz on the board, but it crucifies my CPU overclock.

[ocgmj]

Nice work Patch. :)

[DOM]

13905 marks with Ati Radeon HD 4870 at 900/1100MHz (http://www.hwbot.org/community/submission/1055772_)

just messing with the 4870 on cold air :D

[Kal-EL]

wow, 23 boints just like that!

[Splave]

wow, fuck fermi Im going to blast my 4870!

[RomDominance]

Don't make me sick the MaddMocker on ya!:taunt:

[Splave]

easy mangina ;)

[Splave]

w00t the worst is over, new r3e will be here tomorrow hopefully its a -20 board.

2nd 655k CB is -186c 1.8v with ocz freeze :) board was wet so I had to quit for tonight. Just tested CB.

2x sempron 140s came today for more wprime single core action

Going to try getting the proadlizers on the lightning cold as well...plenty to do this week.

[Patch]

E6300 was the biggest pos ever. OC'd worse on LN2 than a lot of guys were doing on air. Waste of LN2.....

Doing 920 on SS right now. Not bad. Boots and benches 32M at 5.04 ghz, but hitting a hard wall there. Might be temp related. Might be PCIE related as my vrap is getting more difficult. It's not liking more than 112.

I really suck balls at 32M.......

[Dentlord]

Yesterday was horrid, my ram died, and my r3e is crippled.

I got a decent wprime run in before the shit hit the fan, but now I have to wait on new sticks before I can bench more.

I ordered these https://www.superbiiz.com/detail.php?name=WX200UB2G7&title=Super-Talent-Project-X-Series-DDR3-2000-2GB-CL7-Memory

Patch, you think you suck at 32m??? I am 25s behind Splave at 50mhz FASTER speed :laughing:

[Splave]

do you think it has anything to do with brens board being a chl8318 and yours being a chl8318-20? His xeon was epic, still my mind is blow how you guys both spend 1700 on chips :) life is good, hopefully they can meet eachother in your sr2 someday for some epic 3d!

[FACE]

x5677 is epic... thinking about selling my car to get one.. or selling myself to fat chicks (bet they pay more)

[Dentlord]

do you think it has anything to do with brens board being a chl8318 and yours being a chl8318-20? His xeon was epic, still my mind is blow how you guys both spend 1700 on chips :) life is good, hopefully they can meet eachother in your sr2 someday for some epic 3d!


That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D

[Splave]

^ROFL

AAAAAAAYYYYYEEEE


Joey can I come! lol


2 new in box celeron 347
1 server pull 352

8ghz weekend?

[RomDominance]

That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D

Can't wait, gonna be EPIC SAUCE FTMFW!

^ROFL

AAAAAAAYYYYYEEEE


Joey can I come! lol


2 new in box celeron 347
1 server pull 352

8ghz weekend?

Gosh I hope so bro!

I just hope this 655k comin on teh brown truck this mornin is a 7g monsta!

[DrNip]

That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D


Let me know and I'll roll my arse out of the house to come see this in person for sure!

[Dentlord]

I'm gonna bench dammit!


Did the westmere mod on the 762 and pulled the crappy reaper ram from the gamer, xeon abuse continues!

[Splave]

^ YESSSS good luck joey

[DrNip]

:broomstick:

[Kal-EL]

hey, anybody gonna forget September 2010? ;)


:laughing::party::evil:

[Splave]

I plan to forget that shit asap lol but october promises to be quite a spectacular month

[ocgmj]

I plan too leave September in the rear view mirror. Just found out one of my long time friends wife passed away on Monday. :(

[DOM]

hey, anybody gonna forget September 2010? ;)


:laughing::party::evil:i dont even remember yesterday :laughing:

I plan too leave September in the rear view mirror. Just found out one of my long time friends wife passed away on Monday. :(
thats sad to hear, my condolences goes out to him and there family

[Dentlord]

Got some new sticks to send into battle (RIP Blades, you were loved)

Hope they are screamers!!

[DOM]

Got some new sticks to send into battle (RIP Blades, you were loved)

Hope they are screamers!!

those look like mine :D

[DrNip]

Nice! I have a set of the cas8 2000 2x2gb and cas 8 2133 2x2gb. Your Blades lasted way longer than mine. Mine only lasted 48 hours!

[Splave]

if only this 980x liked cold.
PF 5800mhz 1.601v :( -120c not scaling with voltage at all

[Patch]

Incoming.

http://img375.imageshack.us/img375/8558/captureyy.jpg (http://img375.imageshack.us/i/captureyy.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

I gotta get a 2D boint worthy CPU sometime. And buying a whole platform is cheaper than trying another 480........

[Kal-EL]

lol, Patch, you speak the truth brudder, an entire platform for the price of a 480.

[Dentlord]

KA ....

http://hwbot.org/community/submission/1056968_dentlord_wprime_32m_xeon_x5677_3sec_921ms

BOOM ...

http://hwbot.org/community/submission/1056969_dentlord_wprime_1024m_xeon_x5677_2min_6sec _93ms



762 classy smoked the hell out of my r3e with this chip, hands down...

[ReverendMaynard]

sick D, love seeing the Classy get some time on your bench...it ain't obsolete yet!


KA ....

http://hwbot.org/community/submission/1056968_dentlord_wprime_32m_xeon_x5677_3sec_921ms

BOOM ...

http://hwbot.org/community/submission/1056969_dentlord_wprime_1024m_xeon_x5677_2min_6sec _93ms



762 classy smoked the hell out of my r3e with this chip, hands down...

[Neuromancer]

Sweet jeebus nice runs Dent!

I have a new Ggiabyte AMD board incoming that should help me milk some locked chips :)

Hoping to push that sempron to sick new heights, then I will start in with the Ath II chips :)


AND..... its DDR3!!! So no expensive DDR2 necessary w00t!

[Kal-EL]

Noice runnage!

[Dentlord]

ROFL @ Supes avvy!!!!

Thanks, yeah the evga board dominated ... could have been my dying ram when I had it in the r3e but biig difference.

[Splave]

Sweet jeebus nice runs Dent!

I have a new Ggiabyte AMD board incoming that should help me milk some locked chips :)

Hoping to push that sempron to sick new heights, then I will start in with the Ath II chips :)


AND..... its DDR3!!! So no expensive DDR2 necessary w00t!

Uh oh you need a ddr2 board to push it. Mine maxed at 5 ghz in the crosshair iv but flies in ud4p idk if it just a 7 vs 8 chipset thing though

[Splave]

Sick dentcraft! ;)

[FACE]

Damn.. I need a 5677....


...anyone want to buy a slightly used woman?

the tits are fake, but the attitude is REAL... :laughing:

[ocgmj]

Nice work from the Dentmaster!

[Neuromancer]

Uh oh you need a ddr2 board to push it. Mine maxed at 5 ghz in the crosshair iv but flies in ud4p idk if it just a 7 vs 8 chipset thing though

No thats what I thought too the XT-UD5P has two guys pushing 400 and a few others well over 300 :)

Got outbid on the UD4P at the last second, but found the Xt-UD5P for $30 less :)

Found a small shop carrying the UD4P for $130 shipped if this board = fail sauce, I will flip it out and go DDR2.

linky to refernce clock at the bot (http://hwbot.org/searchResults.do?direction=&applicationId=18&cpu=&numberOfProcessors=0&gpu=&numberOfVideocards=0&manufacturer=GIGABYTE&chipset=790FX&model=GA-MA790FXT-UD5P&memManufacturer=&memType=&memProduct=&minCpuFreq=&maxCpuFreq=&minGpuCoreFreq=&maxGpuCoreFreq=&minGpuMemFreq=&maxGpuMemFreq=&minMemFreq=&maxMemFreq=&countryId=0&teamId=0&userName=&minScore=&maxScore=&displayAdvanced=false&filterBlocked=&filterUser=&filterVerification=&imageAttached=&dateFrom=&dateUntil=&system=&minTotalPoints=&gpuId=0&cpuId=0&chipsetId=926&modelId=14018&manufacturerId=189&memManufacturerId=&memProductId=&memTypeId=&offset=0)


Different board I saw one of these for sale too totally sick HTREF clock with DDR3

http://hwbot.org/community/submission/1053167_wizerty_cpu_z_sempron_140_5687.55_mhz

[DrNip]

Damnit man!

[Neuromancer]

Would have told you nip I just found out today. UD3P/UD4p DDR2 baords are rocking hte top spots so did not even notice until I started searching for specific boards.

(I wont be hitting those speeds for a while though... need to have a nice cache of chips before I rent the 160L :) )

[DrNip]

It's cool. I have a Black Opps X48 that I scored for $89.99 new on Amazon inbound as well as about 7-8 775 chips inbound. Going to get neck deep in some 775 2D benching. Also picked up an i5 750 just for shits and giggles. Need to go ahead and pick me up one of those sempron's tomorrow I guess even though I don't have the mobo for it.

Ya think this place is legit for pickling one up?

http://www.govgroup.com/ga_ma790x_ud4p_desktop_board-1149835-prd1.htm

[Neuromancer]

No idea. I was going to take a chance at howard (same price there).

[DrNip]

Think I might roll the dice on next payday and pick one up.

[Neuromancer]

Seems to be a good bet.

I will let you know how air cooling the AM3 board goes as well. Sempron is a freaking crazy awesome chip. My top air clocks were same as ln2 but I was on an ASUS board... so 250-300 max HTREF depending on the bios.

[Patch]

I was temp limited after all. LN2 (at DICE temps).

PCIE 130 Velociraptor
PLL 1.82

http://valid.canardpc.com/show_oc.php?id=1404496

My efficiency sucks. It always does. I hate 2D.

http://img828.imageshack.us/img828/2306/pirecord.jpg (http://img828.imageshack.us/i/pirecord.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Splave]

very noice patch ! what temps?

[Patch]

-88 to- 93
CB -95

[Splave]

how much vtt? 1.6v?

[Hondacity]

i tried 1.65v on dice....sorta harmed my cpu but it was still runnin lol

[Patch]

Vtt 1.52
Seemed unhappy with more

[Dentlord]

Well that was a lot of work for ~60 hardware boints ... but Ill take it I guess lol

e8600 topped out around 6150, I'll try the other one another time.

[GeorgeStorm]

Every little helps :)

[Patch]

Well that was a lot of work for ~60 hardware boints ...

Know what you mean. Feeling the same way about this 920 right now. Pretty good chip, but a hell of a lot of work.

Not much difference in hardware boints between 150th place and 10th place with this super popular hardware. Only spending a lot of time and LN2 because I'm trying to beat OCA bro scores. :laughing:

Every little helps :)

True dat.

[Patch]

.....we're back over 22K. The Island Bench session is firing it up. :thumbsup:

http://img521.imageshack.us/img521/4218/22kv.jpg (http://img521.imageshack.us/i/22kv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Kal-EL]

.....we're back over 22K. The Island Bench session is firing it up. :thumbsup:

http://img521.imageshack.us/img521/4218/22kv.jpg (http://img521.imageshack.us/i/22kv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
Woot! Woot!
Island boys are No Ka Oi

[Dentlord]

I just looked around my hotel room and realized what was going on in here....
I have something to say...

My name is Joey, and I am an Overclockaholic. :laughing:

REX + e8600
Classified 762 + Xeon x5677
Maximus III Formula + 655k
Crosshair IV Formula + Sempron 140
Rampage III Extreme + 980X


And thats just the boards :blush:

[FACE]

I just looked around my hotel room and realized what was going on in here....
I have something to say...

My name is Joey, and I am an Overclockaholic. :laughing:

REX + e8600
Classified 762 + Xeon x5677
Maximus III Formula + 655k
Crosshair IV Formula + Sempron 140
Rampage III Extreme + 980X


And thats just the boards :blush:

FAP FAP FAP FAP @ attachment.... :blink:

[GeorgeStorm]

That is crazy. Id love to have just one of those setups :P

[Dentlord]

I should put a sign in that pic, it could be my for sale thread if work doesn't pick up soon :laughing:

[Neuromancer]

Does that sempron unlock? few more free points if it does :) (not nearly as many as single though :( )

[Dentlord]

Does that sempron unlock? few more free points if it does :) (not nearly as many as single though :( )


Nope :(

[Splave]

w00t asked the guy what he would take for all three $45 shipped ftw
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280534126699&ssPageName=STRK:MEWNX:IT

[Splave]

Damn this card is win :thumbsup: going to be hitting top 20 on air no vmem mod and no cold on cpu :Hi:

http://overclockaholics.com/forums/attachment.php?attachmentid=3491&d=1285458299

[Kal-EL]

What dat? 4870?
Boint machine :D

[Splave]

4850 ducktape edition :D

[Dentlord]

holy crap, you are such a bench stud Al ...

No ln2? no problem Ill just get tons of boints on fucking AIR LOL!!!

[Splave]

means alot comming from you joey :D

[DrNip]

Yeah I think you have a prob Joey. An Overclockaholic and an Asusaholic! Don't worry though, we are all twisted in the head around here.

[Patch]

Sweet card, Al.

A 4870 should be here monday. Hope it clocks 1/2 way as good as that 4850.

[Splave]

what do ya think guys this too many volts for regular water :laughing:

Im going till I hit 5ghz benchable
(score low gpu at stock)

http://overclockaholics.com/forums/attachment.php?attachmentid=3494&stc=1&d=1285518391

[DrNip]

Haha nice one splave!